ARBO Arbomeric MP20 380ml – Box of 25

(1 customer review)


From: £163.20 inc. VAT
£136.00 ex. VAT

Checkout
  • Suitable For: structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas.
  • Area of use: INT & EXT
  • Application Method: barrel gun
  • Volume: 380ml
  • Container Type: cartridge
  • Type: sealant
  • Colour: 3 colours
  • Brand: ARBO
  • Manufactuer: ARBO
  • Box Size: 25

 

Arbomeric MP20 is a one-part high modulus modified polymer sealant that cures on exposure to moisture vapour to form a tough but elastic rubber. 

Arbomeric MP20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas. NB Not recommended for joints in lightweight cladding and swimming pools. It is over-paintable once fully cured; pre-use tests are advised to demonstrate compatibility with individual paints. 

 

 

For more information on Arbo, please visit their website here.

For more in our range of sealants, please click here. For application guns to use with this product, please click here.

 

Arbomeric MP20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas.

 

APPLICATION INSTRUCTIONS 

Joint Preparation 

The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes. 

Joint Backing 

Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam, should be used to provide the correct joint depth. All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants. 

Application 

Arbomeric MP20 is supplied in polyethylene 380ml cartridges and 600ml foils.

JOINT SIZE SUITABILITY 

Joint Width 

Minimum 6mm 

Maximum 25mm (single application); 35mm (multiple applications) 

Joint Depth 

Minimum 10mm on porous substrates (12mm in floor joints) 

Minimum 6mm on non-porous substrates (12mm in floor joints) 

Maximum 20mm 

Width: Depth ratio 

(within above min/max restrictions) 

2:1 butt joints 

1:1 lap joints/floor joints

 

1 review for ARBO Arbomeric MP20 380ml – Box of 25

  1. Colin Fuller (verified owner)

    Great price, speedy delivery, all round good service. Would recommend to anyone.

Add a review

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.21 inc. VAT
£3.51 ex. VAT

From: £4.21 inc. VAT
£3.51 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£11.48 inc. VAT
£9.57 ex. VAT

£11.48 inc. VAT
£9.57 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £217.20 inc. VAT
£181.00 ex. VAT

From: £217.20 inc. VAT
£181.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £146.40 inc. VAT
£122.00 ex. VAT

From: £146.40 inc. VAT
£122.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £78.00 inc. VAT
£65.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £70.80 inc. VAT
    £59.00 ex. VAT

    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £8.14£1.19 inc. VAT
    £6.78£0.99 ex. VAT
      ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.       For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here.  

  • £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT

    £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT
      Bond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer.   PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH   BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf