Total: £0
(Price shown excludes VAT)Total: £0
(Price shown excludes VAT) (Price shown excludes VAT) (Price shown excludes VAT)
DIY Sealants
Arbo Arbosil 1081
£3.25Arbo Arbosil 1081
Arbo Arbosil 1081 is a one-part Acetoxy Cure Silicone Sealant which cures upon exposure to moisture vapour to form an elastic rubber silicone. Arbosil 1081 White and Black both contain a fungicide which reduces the likelihood of mould growth in environments such as kitchens, bathrooms and other sanitary applications.
However, as Arbo Arbosil 1081 Translucent does not contain a fungicide, it is more suitable for projects such as the production of fish tanks and aquariums.
Main Applications
Arbosil 1081 White and Black are recommended for use around baths, showers, sinks, washbasins, kitchen worktops and many other sanitary and internal application due to the fungicide present in the sealant.
However, this Arbosil sealant is also recommended for shop fronts, showcases and glass to glass joints. It is recommended for the production of fish tanks and aquariums (translucent only).
Application Instructions
Joint preparation
The joint surfaces must be dry, clean and free from any contamination. The substrates should be degreased using the appropriate Arbo Cleaner. Primers may be required on some surfaces. It is
recommended that Arbo Technical Services Department should be consulted, and advice obtained about which primer should be used for specific purposes.Joint Backing
Where applicable, an appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct joint depth. Any joint preparation, priming, and sealant application should be carried out following BS 8000 Part 16. This is the British Standard for the sealing of joints in buildings using sealants.
Application
Arbosil 1081 is supplied in polyethylene 310ml cartridges and can be applied into the joint using a sealant application gun.
Joint Size Suitability
Joint Width
Minimum: 6mm
Maximum: 25mmJoint Depth
Minimum: 10mm on porous substrates
Minimum: 6mm on non-porous substrates
Maximum: 15mmWe stock a wide range of other Arbo products on our website, which are suitable for use in a variety of different projects. We have a sealant or tool for every project.
For any further information on this specific product please visit the Arbo Website.
Arbo Arbosil 1090
£4.48Arbo Arbosil 1090
Arbo Arbosil 1090 is a one-part Low Modulus Neutral Cure Silicone Sealant which cures upon exposure to moisture to form an elastic rubber like silicone. Arbo Arbosil 1090 has excellent adhesion to concrete, brickwork, metals and many other common construction surfaces.
This sealant is recommended for a wide range of construction applications, including curtain walling, structural joints in light cladding & profiled metal roof sheets.
As a high quality brand Arbo provide a wide range of sealants which are suitable for use across all areas of construction. More Arbo products can be found via or website.
APPLICATION METHOD
Joint preparation
The joint surfaces must be dry, clean and free from all contamination. The surfaces should be cleaned using the appropriate cleaner. Primers may be required on some surfaces. It is advised that Adshead Ratcliffe Technical Services Department should be consulted, and advice obtained about the type of primer for more specific purposes.
Joint Backing
Where applicable, an appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct joint depth.
Application
All joint preparation, cleaning, priming, and application should be carried out following BS 8000 Part 16, this is the British Standard for the sealing of joints in buildings using sealants.
Arbosil 1090 is supplied in 380ml cartridges and can be applied into the joint using a sealant applicator gun.Joint Size Recommendations
Joint Width
Minimum: 6mm
Maximum: 25mm (single application) For any advice on multiple applications, please contact Adshead Ratcliffe Technical Services.Joint Depth
Minimum: 10mm on porous substrates
Minimum: 6mm on non-porous substrates
Maximum: 20mmStorage.
9 months unopened in the original packaging, stored in a cool, dry place out of direct sunlight.
Health & Safety
No particular hazards with this product but please consult Material Safety Data Sheet for full information.
We now also stock a wide range of other Arbo Products on our website, our team will be happy to assist you with selecting the right sealant for your project. For any further information, you may require, please visit the Arbo Website.
Arbo Arbosil 1096
£4.65Arbo Arbosil 1096 is a one-part Low Modulus Neutral Cure Silicone, which cures upon exposure to moisture vapour to form an elastic, rubber-like silicone.
Recommended for use in a wide range of construction applications, including glass to glass joints, curtain wall assemblies, perimeter seals to curtain walls, perimeter sealing to polyester powder coated and PVCu frames. Approved for use with laminated glass by several manufacturers. Suitable for use as a weather seal on structural glazing applications.
This product is not recommended for overpainting and use against natural stone.
APPLICATION
Preparation
The surfaces must be dry, clean and free from any contamination. The surfaces should be degreased using an appropriate cleaner. Primers may be required on some surfaces. It is advised that Adshead Ratcliffe Technical Services Department should be consulted and information obtained about the choice of primer for specific purposes.
Joint Backing
Where applicable, an appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct depth for the joint. All preparation, priming, and sealant application should be carried out following BS 8000 Part 16. This is the British Standard for the sealing of joints in buildings using sealants.
Application
Arbosil 1096 is supplied in a 380ml cartridges and can be applied into the joint using a sealant application gun.
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm
Maximum 25mm (single application);
50mm (multiple applications)Joint Depth
Minimum 10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 15mmHEALTH & SAFETY
Contains Oximosilanes. Please consult the MSDS for full information.
STORAGE LIFE
Twelve months in original unopened packaging stored in a cool, dry place out of direct sunlight.
We also stock a wide range of other Arbo Products on our website.
For any further information, you may need, please visit the Arbo Website.
Arbo Arbosil 1096 – Box of 25
£105.50Arbo Arbosil 1096 is a one-part Low Modulus Neutral Cure Silicone, which cures upon exposure to moisture vapour to form an elastic, rubber-like silicone.
Recommended for use in a wide range of construction applications, including glass to glass joints, curtain wall assemblies, perimeter seals to curtain walls, perimeter sealing to polyester powder coated and PVCu frames. Approved for use with laminated glass by several manufacturers. Suitable for use as a weather seal on structural glazing applications.
This product is not recommended for overpainting and use against natural stone.
APPLICATION
Preparation
The surfaces must be dry, clean and free from any contamination. The surfaces should be degreased using an appropriate cleaner. Primers may be required on some surfaces. It is advised that Adshead Ratcliffe Technical Services Department should be consulted and information obtained about the choice of primer for specific purposes.
Joint Backing
Where applicable, an appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct depth for the joint. All preparation, priming, and sealant application should be carried out following BS 8000 Part 16. This is the British Standard for the sealing of joints in buildings using sealants.
Application
Arbosil 1096 is supplied in a 380ml cartridges and can be applied into the joint using a sealant application gun.
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm
Maximum 25mm (single application);
50mm (multiple applications)Joint Depth
Minimum 10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 15mmHEALTH & SAFETY
Contains Oximosilanes. Please consult the MSDS for full information.
STORAGE LIFE
Twelve months in original unopened packaging stored in a cool, dry place out of direct sunlight.
We also stock a wide range of other Arbo Products on our website.
For any further information, you may need, please visit the Arbo Website.
Arbo Arbosil HM
£2.25Arbo Arbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains
a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces, and will not discolour during its service life, whilst maintaining good elasticity.MAIN APPLICATIONS
This product is recommended for the sealing around all types of sanitary fittings including baths, showers, urinals, sinks and washbasins in both domestic and commercial locations.
– It is suitable for use in areas of high humidity.
– Can be used to seal around laminates and worktops.
– Suitable for both interior and exterior use.
– Use for sealing of aluminium sheets and components.
– Use as an adhesive to bond PVC trimsAPPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination and any loose materials. The surfaces should be decreased using the appropriate Arbo Cleaner. Primers
may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to
the choice of primer for specific purposes.Joint Backing
Where applicable, appropriate joint filler e.g. closed-cell polyethene foam should be used, to provide the correct joint depth.
Application
Arbosil HM is supplied in cartridges and can be applied into the joint using an Arbo Caulking Gun. All joint preparation, priming, and sealant application should be carried out
in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.STORAGE LIFE
12 months in original unopened package stored in a cool, dry place out of direct sunlight. Protect from frost.
HEALTH & SAFETY
No particular health hazards are associated with this product but please consult Material Safety Data Sheet for full information.
You can also find a wide range of other Arbo products on our website.
For any further information, you may need, please visit the Arbo website.
Arbo Arbosil HM – Box of 25
£52.75Arbo Arbosil HM Box of 25
Arbo Arbosil HM is a one-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber, suitable for use in a range of environments.
Arbosil HM is also resistant to fungus and mildew due to the fungicide present in this sealant. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces, and will not discolour during its service life, whilst maintaining good elasticity.
MAIN APPLICATIONS
This product is recommended for the sealing around all types of sanitary fittings including baths, showers, urinals, sinks and washbasins in both domestic and commercial locations.
– It is suitable for use in areas of high humidity.
– Can be used to seal around laminates and worktops.
– Suitable for both interior and exterior use.
– Use for sealing of aluminium sheets and components.
– Use as an adhesive to bond PVC trimsAPPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination and any loose materials. The surfaces should be decreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted, and advice obtained with regard to the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler e.g. closed-cell polyethene foam should be used, to provide the correct joint depth.
Application
Arbosil HM is supplied in cartridges and can be applied into the joint using an Arbo Caulking Gun. All joint preparation, priming, and sealant application should be carried out
in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.STORAGE LIFE
12 months in original unopened package stored in a cool, dry place out of direct sunlight. Protect from frost.
HEALTH & SAFETY
No particular health hazards are associated with this product but please consult Material Safety Data Sheet for full information.
You can also find a wide range of other Arbo products on our website.
For any further information, you may need, please visit the Arbo website.
Arbo Arbosil LM 380ml
£2.75Arbo Arbosil LM is a one-part Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to form an elastic silicone rubber. (Please note: Black, Dark Bronze and Translucent come in 310ml cartridges). It is recommended for a number of applications, such as, perimeter pointing of PVCu frames, sealing joints in brickwork, remedial glazing and sealing joints in translucent roofing sheets.
Application Instructions
Joint preparation
The joint surfaces should be dry & free from all dust & contamination. The surfaces will need to be cleaned or degreased using Arbo’s appropriate cleaner. Primers may be required on some surfaces. It is advised that Adshead Ratcliffe Technical Services Department should be consulted with regard to the choice of primer for specific purposes.
Joint – Backing
Where applicable, an appropriate joint filler, such as a closed-cell polyethene foam should be used to provide the correct depth for the application. All joint preparation, priming, and sealant application should be
carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.Application
Arbosil LM is supplied in polyethene 310 and 380ml cartridges and can be applied into the joint using an Arbo Caulking Gun
Packaging
25 x 310ml or 380ml Polyethylene Cartridges per box. Polyethene Nozzles are included in each box.
Colours
Anthracite, Buff, Grey, Portland, White, Magnolia, Rustic Red, Light Grey, Brown, RAL 7016 (Dark Anthracite), RAL 7022 (Umbra Grey)
Storage Life
12 months in original unopened packaging stored in a cool, dry place out of direct sunlight
Accessories
Primer
Arbo 2650 Primer (500ml tin) Yield approximately 125 metres per tin
Arbo 2402 Primer (500ml tin) Yield around 200 metres per tin
Arbo Primer 2172 (500ml tin) Yield about 200 metres per tinHealth and Safety
Contains Oximosilanes. Please consult Safety Data Sheets for full information.
We offer a wide range of other Arbo products on our website
For any further information you may need on this product, please visit the Arbo website.
Arbo Arbosil LM 380ml Box of 25
£55.25Arbo Arbosil LM is a one-part Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to form an elastic silicone rubber. (Please note: Black, Dark Bronze and Translucent come in 310ml cartridges). It is recommended for a number of applications, such as, perimeter pointing of PVCu frames, sealing joints in brickwork, remedial glazing and sealing joints in translucent roofing sheets.
Application Instructions
Joint preparation
The joint surfaces should be dry & free from all dust & contamination. The surfaces will need to be cleaned or degreased using Arbo’s appropriate cleaner. Primers may be required on some surfaces. It is advised that Adshead Ratcliffe Technical Services Department should be consulted with regard to the choice of primer for specific purposes.
Joint – Backing
Where applicable, an appropriate joint filler, such as a closed-cell polyethene foam should be used to provide the correct depth for the application. All joint preparation, priming, and sealant application should be
carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.Application
Arbosil LM is supplied in polyethene 310 and 380ml cartridges and can be applied into the joint using an Arbo Caulking Gun
Packaging
25 x 310ml or 380ml Polyethylene Cartridges per box. Polyethene Nozzles are included in each box.
Colours
Anthracite, Buff, Grey, Portland, White, Magnolia, Rustic Red, Light Grey, Brown, RAL 7016 (Dark Anthracite), RAL 7022 (Umbra Grey)
Storage Life
12 months in original unopened packaging stored in a cool, dry place out of direct sunlight
Accessories
Primer
Arbo 2650 Primer (500ml tin) Yield approximately 125 metres per tin
Arbo 2402 Primer (500ml tin) Yield around 200 metres per tin
Arbo Primer 2172 (500ml tin) Yield about 200 metres per tinHealth and Safety
Contains Oximosilanes. Please consult Safety Data Sheets for full information.
We offer a wide range of other Arbo products on our website
For any further information you may need on this product, please visit the Arbo website.
Arbokol 1025 SP – Swimming Pool Grade
£42.20£40.39Arbokol 1025SP is a unique two-part Epoxy sealant which cures to form a hard-wearing seal. It is designed to accommodate small amounts of movement in extension but a considerable movement in compression.
Arbokol 1025SP is recommended for use in a variety of internal stress relief joints, where continual water resistance & a high level of chemical resistance is required.
APPLICATIONS
Swimming pools, tile to tile joints (no primer required), compression joints, long term water immersed joints, shower rooms. This product is not recommended for structural joints applications.
APPLICATION INSTRUCTIONS
Joint Prep
The surfaces must be clean and free from all contamination. Surfaces should be cleaned using an appropriate surface cleaner.
Mixing
The ratio of the curing agent to the base compound controls the performance properties of Arbokol 1025 SP & the tins are filled to this exact mixing ratio. It is essential, therefore that the entire contents of the
curing agent tin are added to the base tin. The two components must be mixed thoroughly to ensure complete homogeneity.Application Method
The usual method, once mixed, is to fill the sealant into an empty barrel gun, using a heavy-duty follower plate. The barrel is placed over the hole in the centre of the plate and filled by applying steady downward pressure & pulling the plunger rod. Fix end cap to the barrel, and the mixed sealant is then ready for application. It is recommended that PC Cox Barrell Gun is used for the application.
Joint Backing
Where applicable, appropriate joint filler, e.g. a closed-cell polyethylene foam should be used to achieve the correct joint depth. All joint preparation and application should be carried out by following BS8000 Part 16 (British standard for the sealing of joints in buildings)
JOINT SIZE SUITABILITY
Joint Width
Minimum: 6mm
Maximum: 20mm (single application)Joint Depth
Minimum: 10mm on porous substrates / 6mm on non-porous substrates
Maximum: 10mmWe also stock a wide range of Arbo Products on our website.
For any further information, you may need, please visit the Arbo website.
Bond It Professional 4 Part Sealant Applicator Tool Kit
£4.50The Bond It Professional 4 Part Sealant Applicator Tool Kit is a durable and handy kit for use with a range of mastic sealants. Suitable for smoothing and finishing, both internally and externally, in hard to reach areas, such as behind bath taps and corner areas.
This sealant applicator kit can also be used to create recessed joints, perfectly flush joints and tidy fillet sealant joints with any type of mastic sealant.
Supplied in a neat plastic case with instruction leaflet, this easy to use kit can be bought by both sealant specialists and DIY novices. The kit contains 4 tools which cover 15 profiles: any edge, any corner, any joint – from 0 to 28mm. They work well with all kinds of sealant and provide you with a perfectly finished waterproof seal every time.
We recommend purchasing a high-quality mastic sealant to use alongside this kit, all of which can also be found via our website. If you are looking for additional sealant application tools, accessories and mastic guns these can also be found here.
For more information on discounts available or how to open a trade or credit account with us, visit our sign-up page.
Bond-It Bath-Mate Bath & Kitchen Sealant – Box of 25
£44.00Bond-It Bath-Mate Bath & Kitchen Sealant
Bond-It Bath-Mate is a high quality, permanently flexible, water-based sealant with excellent adhesion to plastic, ceramic tiles, wood and porcelain. It can be overpainted and is easy to use. Often this sealant is also used as a method to repair grout and improve the appearance of a tired and worn bathroom or kitchen.
Uses
Bond-It Bath-Mate BATH & KITCHEN SEALANT can be used to seal around ceramic baths, sinks and worktops, forming a watertight bond to the surfaces. Contains a powerful anti-fungal compound to prevent mould growth. Easy to apply and any mistakes can be easily rectified with water.
Preparation
All surfaces must be clean, dry, sound and free from dust, oil or any other contaminants that may hinder adhesion.
Priming
Bond It BATH & KITCHEN SEALANT does not require a primer on most common construction surfaces. To determine whether a primer is necessary, a sample should be tested. Contact Bond It Technical Service Department for recommendations.
Application
Apply using a standard sealant gun. Cut tip from the cartridge, be careful not to damage the screw thread. Cut the nozzle at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Smooth down within 15 minutes using a slightly wetted spatula. Remove excess product with a damp cloth. Do not saturate the surface with water, as this will delay curing the process.
We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.
Limitations
Not suitable when:
– Applied externally during rainy weather.
– Applied at temperatures below +5°C.
– Not suitable for plastic baths – use a sealant with greater flexibility.
– Do not use in joints immersed continuously in water.
– Can not be used in contact with bituminous products.
– Used in areas of high abrasion, e.g. floor joints.
– This product is not a silicone sealant!For all other Bond-it products on our website, please click here.
For any further information you may need on Bond-it, please visit their website here.
Bond-It De-Bond Mate Silicone Sealant Remover – Box of 12
£37.68Bond-It De-Bond Mate Silicone Sealant Remover – Box of 12
Bond-It De-Bond Mate is a non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.
Ideal for use in a trade environment where errors have been made when applying silicone sealants, which can be easily done. Bond-It provide high quality products available at cost-effective prices, box of 12 means bulk orders are simple and can also be available with discounts for our trade and credit account holders.
Uses
Bond-It De-Bond Mate Silicone Sealant Remover can be used to remove old silicone sealant during renovations. It is suitable for use on concrete brick, glass, metals, PVCu and acrylic-based products.
Application
Cutaway excess sealant with a knife or sharp blade. Protect any surrounding paintwork with masking tape. Wipe clean with paper tissue or a dry cloth and ensure all traces of solvent are removed.
Keep some water handy to deactivate any runs. After that, surfaces should be cleaned with a solvent, such as methylated spirit, before applying fresh sealant.Limitations
If in doubt, try a small area first. Furthermore, if the gel comes into contact with water, the active ingredients will be deactivated, and the gel rendered unusable.
Storage Conditions
Store in original, unopened containers, out of direct sunlight. Store between 50 C and 25o C.
For all other Bond-it products on our website, please click here.
For any further information, you may need on Bond-it, please visit their website here.
DIY Sealants
There are many general-purpose silicone and DIY sealants available to help you get the job done right. We stock a wide selection of these sealants for home improvement, workplace application, and general DIY applications.
Silicone sealants are generally versatile in formulation which allows a wide variety of applications. However, some sealants are formulated for specific jobs and it is essential to choose the right product.
At Sealant Supplies Ltd, you can choose from our full catalogue of sealants. We have a wide variety of sealants including roof and gutter sealants, timber sealants, laminate sealants and more. All our sealants come from affordable and reputable brands that you can trust.
We also stock general purpose sealants which are more flexible and suitable for use on smooth, non-porous materials. Their waterproof properties make them ideal for use in showers, sinks, and baths. Some general purpose sealants contain anti-fungal properties which make them a perfect choice for bathrooms and kitchens.
General purpose sealants cure quickly after application providing a high-strength, permanent waterproof seal. This makes them ideal for glass, metal, wood, and plastics among others. General purpose sealants can withstand moisture, heat, and vibration which combined with their low viscosity aids quick application and drying.
Check out our catalogue of DIY silicone sealants to find the solution you need.
Shop by brand
