Bond-It WP100 Neutral Cure Oxime Silicone 380ml

For perimeter sealing of wood, aluminium and PVCu door and window frames and weather sealing and flexible jointing of infill panels. For building and construction joints and joints between different materials with high movement.

Preparation

Ensure all substrates are dry and free from grease or any contaminants that may affect adhesion. For best results on movement joints, Bond-it EXPANDING FOAM is recommended as a backing material or a suitable backing rod.

Application

When sealing deeper joints, use a foam backer rod to minimise wastage. Cut the tip of the cartridge, screw-on nozzle and cut at an angle when using a standard sealant gun. Tool the sealant using the appropriately shaped tooling aid – DO NOT USE A WET FINGER. The sealant may crack if exposed to movement before it is suitably cured; therefore, joints should be protected from the movement for at least 3 hours after application.

Limitations

Bond-It WP100 is not suitable for use with aquaria. Not suitable for use on bitumen or asphalt.