Everbuild Aqua Mate 295ml

– All sealing applications in aquaria.
– Sealing pond liners and all supply/drainage piping.

APPLICATION

PREPARATION

All surfaces must be dry and dust free. Loose surface coatings, and old sealant and mastic joints, should be removed before application. All glass must be cleaned before use.

APPLICATION METHOD / TOOLS

Surfaces must be clean, free from dust, grease and other contaminants.

The joint must conform of two parts: Sealing joint: the depth of which must be identical to the width of glass used.

LIMITATIONS

– Not for use on surfaces that may bleed oils, solvent or plasticisers.
– As pond materials vary in quality, always test a small area first for adhesion.
– Always wash out areas after use to remove any residual acetic acid. Testing the pH before use is recommended.
– Allow the sealant to cure before moving/filling with water fully.