illbruck AT200 1ltr
£2.60 inc. VAT
£2.17 ex. VAT
- Product ID: AT200378189
- Suitable For: removing grease, oil, etc
- Area of use: EXT & INT
- Application Method: cloth
- Volume: 1L
- Container Type: Tin
- Colour: transparent
- Brand: illbruck
- Manufactuer: illbruck
AT200 is a solvent-based cleaning blend designed for effective cleaning and degreasing of joint edges, adhesive surfaces, and working tools. It is fast drying, easy to use, and ideal for preparing substrates prior to the application of illbruck sealants; however, it should not be used on solvent-sensitive plastics or painted surfaces.
Key points
– Solvent blend for cleaning and degreasing joints, surfaces, and tools
– Rapid drying and easy application
– Ideal for substrate preparation before applying illbruck sealants
– Not suitable for solvent-sensitive plastics or paints
Storage – Store in dry shaded conditions between +5°C and +25°C.
Shelf Life – 24 months when stored as recommended in original unopened packaging.
For more in our range of cleaners, please click here. For our full range of products from illbruck, please click here.
For more information onillbruck and their products, you can visit their website here
Suitable for removing grease, oil, etc from joint edges and adhesive surfaces and for cleaning working tools.
Application
– Apply using a clean cloth lightly soaked with AT200.
– Allow a flash-off time of approximately 1 minute.
– Carry out a trial test to confirm that no leaching or migration occurs, particularly on substrates such as high-plasticiser PVC, tar, bitumen, and organic elastomers.
– Always consult the relevant sealant data sheet for complete application instructions.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.