- Product ID: 880086
- Suitable For: - paths, patios, block paving , indian sandstone, natural stone, such as limestone
- Area of use: EXT
- Application Method: long-pile roller, brush, or low-pressure garden sprayer
- Time to full cure: 60 minutes
- Volume: 5L
- Container Type: jerry can
- Colour: white
- Brand: sika
- Manufactuer: sika
Sika® Path & Patio Sealer is a water-based solution designed to seal and protect outdoor surfaces from water, dirt, petrol, grime, and green growth, helping to improve durability and keep patios cleaner for longer. Suitable for use on new, refurbished, or recently cleaned surfaces, it also provides long-lasting protection against weathering and staining while drying to a clear finish.
Key Points:
– Water-based sealer for outdoor paths and patios
– Protects against water, dirt, petrol, grime, and green growth
– Suitable for new, refurbished, or recently cleaned surfaces
– Clear-drying formula that enhances durability and appearance
Shelf Life- 12 months from date of manufacture unopened
Storage Conditions- Store upright, sealed, in a cool, dry, ventilated place at +5 °C to +25 °C. Protect from frost and direct sunlight.
For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
Suitable for:
– Paths
– Patios
– Block paving
– Indian sandstone
– Natural stone, such as limestone
LIMITATIONS
– Use only as directed and store in the original container only.
– Do not apply to surfaces treated with silicone- or stearate-based water sealers, such as Sika® Waterproofer & Protector, unless weathering has removed all water-beading effects.
– Do not apply when air or surface temperatures are below +5 °C.
– Do not use if rain is expected within 5 hours at +20 °C.
– Dispose of product and packaging responsibly and prevent entry into watercourses.
– Users should determine the suitability of the product for their application. For further advice, contact the Technical Services Department if unsure.
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
– Do not apply to paving that has been laid for less than 3 months.
– Always test on a small area before full application.
– Ensure the surface is clean, dry or slightly damp (not wet), and free from grease, loose material, and green growth.
– Avoid surfaces previously treated with silicone- or stearate-based sealers.
APPLICATION
1. Stir thoroughly before use.
2. Apply only in dry weather and when temperatures are above +5 °C.
3. Do not apply if rain is expected within 5 hours.
4. Use a long-pile roller, brush, or low-pressure garden sprayer for application.
5. Do not pour directly onto the surface; apply evenly across the area.
6. The surface will become touch dry in approximately 30 minutes and suitable for foot traffic after 1 hour.
7. Allow 1 hour between coats when applying multiple coats.
Recommended Coats:
– Very porous substrates (e.g. concrete flags and some stone surfaces): Apply 2 coats, allowing 2 hours between coats.
– Low porosity substrates (e.g. dense block paving): 1 coat is generally sufficient.
CLEANING OF TOOLS
– Clean all tools and equipment immediately after use with water and detergent.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.54 inc. VAT
£2.95 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.19 inc. VAT
£2.66 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit





























Reviews
There are no reviews yet.