- Product ID: PU12560PSLG
- Area of use: EXT
- Application Method: foil gun
- Volume: 600ml
- Container Type: foil
- Colour: grey
- Brand: ARBO
- Manufactuer: ARBO
Arbothane 1245 is a one-part polyurethane sealant that cures when exposed to moisture vapour, forming a tough yet flexible rubber seal. It provides good adhesion to concrete and a range of other construction substrates which makes it particularly suitable for sealing floor joints in concrete. However, it is not recommended for use against natural stone and cannot be over-painted.
4 Key Points:
- Type: One-part polyurethane sealant.
- Curing: Moisture-curing to form a tough, flexible rubber.
- Application: Suitable for floor joints in concrete and other construction substrates.
- Limitations: Not recommended for natural stone and not over-paintable.
Storage Life – 12 months in original unopened packaging stored in a cool, dry place out of direct sunlight.
For more in our range of concrete sealants, please click here. For our full range of products from Arbo, please click here.
For more information on Arbo and their products, you can visit their website here.
Suitable for floor joints in concrete.
NB: Not recommended for use against natural stone.
Not over-paintable.
Application Instructions
Joint Preparation
- Ensure joint surfaces are clean, dry, and free from all contamination.
- Degrease surfaces using the appropriate ARBO® Cleaner.
- ARBO AG2 Porous Primer is recommended for use on concrete.
- Consult ARBO Technical Services regarding primer requirements for specific applications.
Joint Backing
- Where applicable, use appropriately sized cross-linked, closed-cell polyethylene foam.
Application
- Carry out all joint preparation, priming, and sealant application in accordance with BS 8000-16:1997 + A1:2010, the British Standard for sealing joints in buildings using sealants.
- Arbothane 1245 is supplied in 600ml foil packs.
- Apply using an ARBO Foil Pack Gun.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
£1,208.16 inc. VAT
£1,006.80 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£8.30 inc. VAT
£6.92 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages -Â Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple




























Reviews
There are no reviews yet.