adhesive
-
£6.85 - £23.94 ex. VATMapeGrip D2 is a fully water-resistant, flexible dispersion adhesive designed for internal wall tiling with most ceramic tiles and mosaics. This non-slip adhesive offers high grab, making it suitable for both commercial and domestic showers and wet areas, but it should only be used for internal applications. Formulated from acrylic resins, finely graded mineral fillers, and additives, MapeGrip D2 is ready to use and comes as a viscous paste that is easy to trowel on vertical surfaces. Once applied, the adhesive provides excellent initial grab, allowing tiles to adhere immediately. ItSelect options This product has multiple variants. The options may be chosen on the product page -
£22.50 - £23.49 ex. VATAdesilex P9 is a grey or white powder made from cement, fine-graded aggregates, synthetic resins, and special additives developed in MAPEI's Research and Development Laboratories. When mixed with water, it creates a mortar that is easily workable and highly thixotropic, allowing for vertical application without sagging or slipping, even with heavy tiles. It offers excellent adherence to various building materials and hardens with minimal shrinkage. Additionally, Adesilex P9 features an extended open time and is resistant to water and frost. Key Points: Adesilex P9 isSelect options This product has multiple variants. The options may be chosen on the product page
-
£37.15 ex. VATARDEX E 90 is a specialized synthetic dispersion designed to enhance the performance of ARDEX X 7 G, ARDEX X 7 W, and ARDEX S 21 cement-based adhesives. When diluted with an equal volume of water before mixing with the ARDEX adhesive powder, ARDEX E 90 significantly improves the adhesive properties of the mortar. The resulting mixture exhibits high adhesive strength, elasticity, and water-repellent qualities, while maintaining the workability, slump resistance, and open time characteristic of standard ARDEX adhesives. Substrate preparation follows the same guidelines as for ARDEX adh
-
£4.52 ex. VATSoudal Contact Adhesive is a ready to use, universal, transparent solvent adhesive based vinyl acetate polymer. Properties - Fast drying - Transparent - Moisture resistant Substrates Nature: rigid, clean, dry, free of dust and grease. Surface preparation: No pre-treatment required. 47A Transparent contact adhesive can be applied on all substrates, except for PS (polystyrene), PE, PP, PTFE. We recommend a preliminary adhesion test on any substrate. For more in our range of adhesives, please click here, or for more products from So
-
£21.25 ex. VATSikaCeram-272 Ultra Flexible White is a rapid-setting, high-strength ceramic tile adhesive with added latex powder for superior flexibility. Designed for bonding ceramic, porcelain, and large-format tiles to various prepared surfaces, it eliminates the need for a separate flexible additive. This adhesive is suitable for both internal and external applications, bonding effectively to concrete, cement screeds, renders, timber, existing ceramic tiles, dense block work, and unskimmed plasterboard. Its water-resistant properties make it ideal for fixing light-colored natural stone
-
£16.02 ex. VATEVERBUILD READY MIXED WALLCOVERING ADHESIVE is a versatile ready-to-use paste designed for hanging various wall coverings, including sculptured, blown, textured vinyl, washable, and heavily embossed wallpapers. It features a high initial tack for secure adhesion, combined with excellent adjustability for precise positioning. The smooth formula ensures easy application and contains a powerful fungicide to inhibit mould growth during drying. Key Points Versatile Use: Suitable for all types of wall coverings, including textured and embossed wallpapers. High Performa
-
£24.37 - £87.53 ex. VATEporip is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protecSelect options This product has multiple variants. The options may be chosen on the product page
-
£25.77 - £28.28 ex. VATKeraflex Maxi S1 is a high-performance, deformable cementitious adhesive available as a grey or white powder made from cement and fine graded sands, enriched with synthetic resins and special additives from MAPEI’s Research and Development Laboratories. It offers excellent workability, low dust, and minimal volatile organic compound emissions. When mixed with water, it creates a highly thixotropic, low-viscosity mortar suitable for bonding large ceramic, porcelain, and natural stone tiles (3-15 mm adhesive thickness) and features: Key Points: Excellent adhesion wiSelect options This product has multiple variants. The options may be chosen on the product page
-
£11.52 - £986.92 ex. VATPlanicrete is a highly stable water dispersion of a specialized synthetic elastomer that is resistant to alkaline saponification and features a low glass transition temperature. This SBR (styrene-butadiene rubber)-based elastomer retains stability even after aging due to the tightly woven chemical binders that connect its polymer chains. This unique structure allows the polymer chains to adopt a parallel alignment when deformed, resulting in exceptional elasticity. Supplied as a highly fluid, white latex, Planicrete enhances the adhesion, plasticity, thixotropy, water retention, andSelect options This product has multiple variants. The options may be chosen on the product page
-
£46.72 ex. VATMapei Ultraflex S2 Quick, a gray-hued powder, comprises a unique blend of specialized cements, carefully graded sand, a substantial amount of synthetic resins, and micronized elastomers, all formulated within MAPEI's dedicated Research Laboratories. When combined with water, it yields a mortar with the following distinct attributes: Innovative Ultralite TechnologyTM yields a lightweight product, providing two notable advantages: a. Weight advantage: Ultraflex S2 Quick, weighing less than traditional cementitious adhesives of equivalent volume, facilitates easier handling and re
-
£5.81 ex. VATOB1 Multi-Surface Cleaner is a powerful, fast-acting solvent degreaser designed for versatility across various surfaces, Ideal for prepping .
-
£6.87 - £81.30 ex. VATTrowel Mastic is a heavy-bodied bituminous mastic designed for filling joints, cracks, and splits in roofing and building materials such as roofing felt, asphalt, concrete, asbestos cement, and metallic guttering and drainpipes. It provides immediate resistance to water penetration after application, making it ideal for maintenance and remedial work. Key Points: Heavy-bodied bituminous mastic used for filling joints, cracks, and splits. Suitable for various materials including roofing felt, asphalt, concrete, asbestos cement, and metal guttering. Immediate watSelect options This product has multiple variants. The options may be chosen on the product page
