bag
Filter Your Product
-
£3.99 - £7.57 ex. VATThis chloride-free, water-based cementitious flooring compound is designed to provide a level base for internal floors and serves as an ideal, cost-effective underlay for modern floor finishes. It sets hard within 2-3.5 hours depending on temperature, with floor coverings able to be applied 6-8 hours after application. The product is pre-blended, requiring only the addition of water, and is economical to use. It can be applied up to 6mm thickness and is suitable for feathering to a smooth finish. Once mixed, it must be poured onto the subfloor within 20 minutes, and the surface shouldSelect options This product has multiple variants. The options may be chosen on the product page -
£7.13 - £22.25 ex. VATARDEX FLEX FS is a versatile, cement-based grouting compound known for its flexibility and water-repellent qualities, eliminating the need for a separate admix. It comes in a variety of sizes and colors, including Brilliant White, Dove Grey, and Black, among others. The grouting compound is available in 2.5kg, 5kg, and 10kg sizes in several colors, and in 2.5kg and 10kg sizes for additional colors such as Organic Earth and Wild Mushroom. Key Points: Classification and Performance: ARDEX FLEX FS is classified as CG2 WA according to BS EN 13888. This meansSelect options This product has multiple variants. The options may be chosen on the product page -
£43.58 ex. VATARDEX K 301 is a fast-setting resurfacing and leveling compound designed specifically for concrete surfaces. Here are four key points about ARDEX K 301: Composition and Setting Time: This grey powder is made from a blend of special cements, graded aggregates, and high-quality synthetic resins. When mixed with water, it forms a fluid mortar that begins to set within approximately 1 hour. It can typically be walked on after 2-3 hours at 20°C. Application Thickness: ARDEX K 301 can be applied in thicknesses ranging from 2mm to 20mm in a single coat. This versatility a -
£6.23 - £19.53 ex. VATARDEX-FLEX FL is a rapid-setting, flexible, and water-repellent cement-based grouting compound, suitable for use without the need for a separate admix. It is available in 2.5kg, 5kg, and 10kg sizes with various color options, and classified as CG2 WA under BS EN standards, indicating improved cementitious grout with reduced water absorption and high abrasion resistance. ARDEX-FLEX FL is ideal for grouting joints from 3mm to 15mm wide between porcelain, ceramic, non-moisture-sensitive natural stone, quarry tiles, extruded tiles, and glass blockwork, and can be used indoors andSelect options This product has multiple variants. The options may be chosen on the product page -
£12.07 ex. VATSikafloor-125 Level Latex is a ready-to-use, latex-modified smoothing and levelling compound designed for advanced flexibility and resilience. Ideal for levelling uneven rigid internal floors before applying final coverings, it is highly fluid and self-smoothing. The compound is easy to apply manually or by pump, offers low shrinkage, and maintains good workability and joint healing throughout its pot life. It is fast-setting, with excellent surface appearance and hardness, while providing outstanding freeze-thaw salt resistance. Additionally, it is protein and formaldehyde free, mak -
£21.95 - £23.04 ex. VATKeraFlex is a cement-based powder, available in grey or white, containing synthetic resins and special additives formulated by MAPEI's R&D labs. When mixed with water, it forms a highly workable, thixotropic mortar that can be applied on vertical surfaces without slumping or tile slipping, even with heavy tiles. It offers excellent adhesion to typical building materials, hardens with minimal shrinkage, and is resistant to water and frost. Additionally, it has an extended open time for ease of application. Tiling done with KeraFlex should be protected from rain, frost, and strongSelect options This product has multiple variants. The options may be chosen on the product page -
£27.56 - £48.14 ex. VATARDEX FEATHER FINISH is an ultra-rapid drying patching and smoothing compound that offers exceptional bond strength to a variety of surfaces, including concrete, plywood, sand/cement screeds, existing smoothing compounds, and ceramic tiles, all without the need for priming. Specifically designed for both commercial and domestic applications, this compound is ideal for preparing surfaces before the installation of resilient floor coverings, such as luxury vinyl tiles or sheet vinyl. ARDEX FEATHER FINISH effectively addresses issues like patching, filling, and feather finishing dayworkSelect options This product has multiple variants. The options may be chosen on the product page -
£9.03 ex. VATLatexplan Trade is a two-part smoothing compound that comprises a grey powder (part A) containing special cements, graded silica sands, and additives mixed with a synthetic rubber latex (PART B). It can be walked on after approximately 1½ to 2 hours and is ready for flooring installation in about 12 hours, depending on thickness and ambient temperature. With a very low odour, it is suitable for use in confined spaces where work or occupancy must continue. Latexplan Trade is also compatible with Mapeproof ESM surface membranes, making it suitable for areas with residual or static moi -
£19.53 ex. VATSikafloor-131 Level Latex Ultra is a high-performance, latex-modified, cement-based self-leveling compound designed for smoothing and levelling uneven rigid internal floors. It is also suitable for exterior applications like sheltered balconies and walkways before laying ceramic tiles, slabs, or natural stone. This versatile compound can be overlaid with common floor coverings or used as a durable final wearing surface. It is resistant to water and frost, can withstand vehicular traffic, and is suitable for application depths of 2-10 mm. Key Points Versatile Usage: -
£39.30 ex. VATARDEX PC-T 4 is a rapid-drying, cement-based compound designed for creating polished concrete floors that are walkable in 2-3 hours and ready for polishing in just 24 hours. Suitable for internal use only, ARDEX PC-T 4 is ideal for fast-track installations in environments like retail stores, schools, and airports. It can be applied from 10mm to 50mm in thickness and up to 130mm with the addition of graded aggregate, although a minimum thickness of 15mm is recommended for optimal leveling. For thicknesses over 30mm, adding larger aggregate may be beneficial; consult ARDEX Technical Se -
£23.76 ex. VATARDEX K 40 FLOW is a high-performance levelling and smoothing compound renowned for its extended wet edge and walkability time. Its rapid hardening properties allow it to be walkable in as little as 2 hours, enabling the application of floor coverings, including timber, within just 6 hours for thicknesses up to 5mm. ARDEX K 40 FLOW is designed to level and smooth a variety of internal subfloors in a single application, including concrete, cement/sand screeds, anhydrite screeds, stone, terrazzo, ceramic tiles, and compatible timber floors. Key Points: Rapid Hardening -
£15.12 - £16.32 ex. VATKerabond T is a cement-based powder available in grey or white, made from fine-grade synthetic resins and special admixtures developed in MAPEI's R&D laboratories. When mixed with water, it forms a trowelable mortar with excellent bonding strength, low slump, and high grab, allowing it to be applied vertically without sagging, even for heavy tiles. It hardens without noticeable shrinkage, providing strong adhesion to standard construction materials. When mixed with Isolastic instead of water, Kerabond T meets the requirements of class C2ES2, a highly deformable cementitious adhesSelect options This product has multiple variants. The options may be chosen on the product page