Arbokol 1000 is recommended for use in expansion joints in brickwork and blockwork, perimeter sealing of timber frames (especially where sealant overpainting is required), and structural joints in heavy cladding. However, it is not suitable for vertical joints wider than 25mm, horizontal joints wider than 20mm, or for internal applications. Due to its relatively slow curing process, Arbokol 1000 should not be used in public areas, schools, or spaces prone to vandalism unless the joints can be securely protected during curing. While the product can be painted, users should conduct a p
Select options
This product has multiple variants. The options may be chosen on the product page
Soudal Fix All Floor & Wall Adhesive is a ready to use, high quality flexible adhesive with high initial grab. Based on SMX Polymer Technology, Fix ALL Floor & Wall is a high performance full surface bonding adhesive, suitable for horizontal and vertical surfaces. Primerless adhesion on most construction materials, both porous (i.e. natural stone, etc.) and non-porous. Available in 4kg bucket.
Properties
- Very good adhesion on almost all substrates.
- Very good mechanical characteristics.
- Good adhesion to most common substrates, even on slightly wet substra
Eporip is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protec
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX AF 635 is a heavy-duty, solvent-free contact adhesive designed for securely bonding floorcovering accessories and profiles to various internal surfaces, including walls, ceilings, and stairs. With its high initial tack and excellent bond strength, ARDEX AF 635 is suitable for both porous and non-porous surfaces, providing strong resistance to plasticiser migration. It is ideal for fixing vinyl, linoleum, textiles, rubber floorcoverings, flexible stair nosings, skirtings, and stair stringers, and is compatible with subfloors that incorporate hot water underfloor heating systems.
EVO-STIK GRIPFILL is a high-strength, solvent-based grab adhesive designed for both interior and exterior use (when covered). It bonds to nearly any building material with exceptional strength and is particularly effective on uneven surfaces due to its gap-filling properties. This solvent-borne, filled rubber resin adhesive is specially formulated to bond various rigid materials, including wood-based boards, laminated plastics, rigid uPVC, insulation materials, and metal sheeting. It adheres securely to surfaces such as brick, stone, concrete, plaster, and insulation boards, provided o
This damp proof membrane is designed for domestic construction and is embossed to enhance mortar adhesion. Made from high-quality reprocessed materials, it remains flexible even in low temperatures and is safe and clean to handle. It is suitable for both horizontal and vertical applications and complies with CE standards. Installation should follow CP102:1973 and BS 5628 guidelines, ensuring a 150mm application above ground level on external walls, with a minimum 100mm overlap when joining pieces. For internal walls, it should be placed at the base of load-bearing walls and linked with
Select options
This product has multiple variants. The options may be chosen on the product page
£6.03 ex. VATArbokol 1000 is recommended for use in expansion joints in brickwork and blockwork, perimeter sealing of timber frames (especially where sealant overpainting is required), and structural joints in heavy cladding. However, it is not suitable for vertical joints wider than 25mm, horizontal joints wider than 20mm, or for internal applications. Due to its relatively slow curing process, Arbokol 1000 should not be used in public areas, schools, or spaces prone to vandalism unless the joints can be securely protected during curing. While the product can be painted, users should conduct a pSelect options This product has multiple variants. The options may be chosen on the product page
