mapei
-
£5.47 - £16.44 ex. VATMapegrip D1 is a ready mixed adhesive paste for internal wall tiling for most ceramic tiles and mosaics. It has a non-slip quality with high initial grab, and an extended open time. Suitable for domestic kitchens, bathrooms and showers. Not suitable for commercial use. CHARACTERISTICS Mapegrip D1 is an adhesive in water dispersion on synthetic resins, selective graded minerals and various additives. Mapegrip D1 is a ready-to-use paste that is easily applied with a trowell, with good high initial grab. It's thixotropic properties make it perfect for installing wall tiles withoutSelect options This product has multiple variants. The options may be chosen on the product page -
£47.28 ex. VATMapeproof Swell is a one-component hydrophilic paste designed for repair and waterproofing tasks. It can be applied to damp or uneven surfaces and is effective at any temperature, even when water is infiltrating or seeping through. Upon contact with water, Mapeproof Swell expands in volume and can withstand significant hydrostatic pressure when properly confined. It adheres well to slightly damp surfaces, provided they are clean and stable. This single-component hydro-expansive paste is supplied in cartridges and is specifically formulated to create flexible, waterproof seals in crac
-
£37.37 - £65.41 ex. VATMapei UltraCare Multi Cleaner is a concentrated neutral cleaner, suitable for the everyday cleaning of both treated and untreated surfaces. It is suitable for use on all washable surfaces, even the most delicate thanks to the neutral pH. UltraCare Multicleaner when diluted (1: 200) does not require rinsing as it leaves no residues and/or halos on the surfaces and can be used both indoors and outdoors. It is effective for ordinary and extraordinary maintenance operations depending on the degree of dilution as detailed below. When used in different dilutions, it's suitaSelect options This product has multiple variants. The options may be chosen on the product page
-
£8.69 - £37.09 ex. VATEporip B is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protSelect options This product has multiple variants. The options may be chosen on the product page
-
£6.85 - £23.94 ex. VATMapeGrip D2 is a fully water-resistant, flexible dispersion adhesive designed for internal wall tiling with most ceramic tiles and mosaics. This non-slip adhesive offers high grab, making it suitable for both commercial and domestic showers and wet areas, but it should only be used for internal applications. Formulated from acrylic resins, finely graded mineral fillers, and additives, MapeGrip D2 is ready to use and comes as a viscous paste that is easy to trowel on vertical surfaces. Once applied, the adhesive provides excellent initial grab, allowing tiles to adhere immediately. ItSelect options This product has multiple variants. The options may be chosen on the product page
-
£12.74 ex. VATMapeguard WP 200 is a flexible, thin-layer polyethylene waterproofing and isolation membrane coated with nonwoven polypropylene fabric on both sides, designed to ensure a strong adhesive bond between the membrane, substrate, and covering materials. This product offers several key properties: Effective Waterproofing: Provides reliable waterproof protection in wet areas. High Tensile and Bond Strength: Ensures robust adhesion with tile adhesives and durability under tension. Crack-Bridging Ability: Accommodates movement and protects against cracking. Alkali Resi
-
£25.77 - £28.28 ex. VATKeraflex Maxi S1 is a high-performance, deformable cementitious adhesive available as a grey or white powder made from cement and fine graded sands, enriched with synthetic resins and special additives from MAPEI’s Research and Development Laboratories. It offers excellent workability, low dust, and minimal volatile organic compound emissions. When mixed with water, it creates a highly thixotropic, low-viscosity mortar suitable for bonding large ceramic, porcelain, and natural stone tiles (3-15 mm adhesive thickness) and features: Key Points: Excellent adhesion wiSelect options This product has multiple variants. The options may be chosen on the product page
-
£11.52 - £986.92 ex. VATPlanicrete is a highly stable water dispersion of a specialized synthetic elastomer that is resistant to alkaline saponification and features a low glass transition temperature. This SBR (styrene-butadiene rubber)-based elastomer retains stability even after aging due to the tightly woven chemical binders that connect its polymer chains. This unique structure allows the polymer chains to adopt a parallel alignment when deformed, resulting in exceptional elasticity. Supplied as a highly fluid, white latex, Planicrete enhances the adhesion, plasticity, thixotropy, water retention, andSelect options This product has multiple variants. The options may be chosen on the product page
-
£22.50 - £23.49 ex. VATAdesilex P9 is a grey or white powder made from cement, fine-graded aggregates, synthetic resins, and special additives developed in MAPEI's Research and Development Laboratories. When mixed with water, it creates a mortar that is easily workable and highly thixotropic, allowing for vertical application without sagging or slipping, even with heavy tiles. It offers excellent adherence to various building materials and hardens with minimal shrinkage. Additionally, Adesilex P9 features an extended open time and is resistant to water and frost. Key Points: Adesilex P9 isSelect options This product has multiple variants. The options may be chosen on the product page
-
£46.72 ex. VATMapei Ultraflex S2 Quick, a gray-hued powder, comprises a unique blend of specialized cements, carefully graded sand, a substantial amount of synthetic resins, and micronized elastomers, all formulated within MAPEI's dedicated Research Laboratories. When combined with water, it yields a mortar with the following distinct attributes: Innovative Ultralite TechnologyTM yields a lightweight product, providing two notable advantages: a. Weight advantage: Ultraflex S2 Quick, weighing less than traditional cementitious adhesives of equivalent volume, facilitates easier handling and re
-
£24.37 - £87.53 ex. VATEporip is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protecSelect options This product has multiple variants. The options may be chosen on the product page
-
£35.46 - £83.49 ex. VATPulicol 2000 is a gel-based adhesive remover formulated with unchlorinated solvents, making it easy to apply with a spatula or brush while emitting minimal odour. It effectively detaches resin-based adhesives and varnishes within minutes, making it an ideal choice for removing both natural and synthetic adhesives, as well as paint and grout residue. Key Points Easy Application: Pulicol 2000 can be applied effortlessly with a spatula or brush and produces very little odour. Rapid Action: It demonstrates a high detachment capacity, working effectively on resin-basedSelect options This product has multiple variants. The options may be chosen on the product page
