Arbokol 1000 is recommended for use in expansion joints in brickwork and blockwork, perimeter sealing of timber frames (especially where sealant overpainting is required), and structural joints in heavy cladding. However, it is not suitable for vertical joints wider than 25mm, horizontal joints wider than 20mm, or for internal applications. Due to its relatively slow curing process, Arbokol 1000 should not be used in public areas, schools, or spaces prone to vandalism unless the joints can be securely protected during curing. While the product can be painted, users should conduct a p
Select options
This product has multiple variants. The options may be chosen on the product page
Soudal Fix All Floor & Wall Adhesive is a ready to use, high quality flexible adhesive with high initial grab. Based on SMX Polymer Technology, Fix ALL Floor & Wall is a high performance full surface bonding adhesive, suitable for horizontal and vertical surfaces. Primerless adhesion on most construction materials, both porous (i.e. natural stone, etc.) and non-porous. Available in 4kg bucket.
Properties
- Very good adhesion on almost all substrates.
- Very good mechanical characteristics.
- Good adhesion to most common substrates, even on slightly wet substra
ARDEX F 5 is a brilliant white, cementitious, MICROTEC fiber-reinforced fairing coat and lightweight repair mortar designed for versatile internal and external use. It is ideal for edge repairs, filling cavities, cracks, gaps, and holes, as well as for patchwork and repairs on vertical and overhead surfaces. ARDEX F 5 is also excellent for smoothing internal walls and ceilings in preparation for paints, clear protective coats, mineral renders, silicone, and other finishes. Additionally, it can be applied to external facades and shop fronts for effective, long-lasting repairs
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX AF 635 is a heavy-duty, solvent-free contact adhesive designed for securely bonding floorcovering accessories and profiles to various internal surfaces, including walls, ceilings, and stairs. With its high initial tack and excellent bond strength, ARDEX AF 635 is suitable for both porous and non-porous surfaces, providing strong resistance to plasticiser migration. It is ideal for fixing vinyl, linoleum, textiles, rubber floorcoverings, flexible stair nosings, skirtings, and stair stringers, and is compatible with subfloors that incorporate hot water underfloor heating systems.
ARDEX A 125 is a grey, cement-based finishing render and repair mortar that effectively addresses surface imperfections, voids, and damage. When mixed with water, it forms a slump-free mortar that dries to a durable, water-resistant finish with a smooth and dense surface ideal for painting.
Key Points:
Versatile Application: Suitable for leveling and smoothing irregularities on vertical and overhead surfaces like concrete, brickwork, blockwork, and existing cement/sand renders.
Durable Finish: Produces a hard-wearing surface that can be left exposed or painted, m
Eporip is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protec
Select options
This product has multiple variants. The options may be chosen on the product page
Keraflex Maxi S1 is a high-performance, deformable cementitious adhesive available as a grey or white powder made from cement and fine graded sands, enriched with synthetic resins and special additives from MAPEI’s Research and Development Laboratories. It offers excellent workability, low dust, and minimal volatile organic compound emissions. When mixed with water, it creates a highly thixotropic, low-viscosity mortar suitable for bonding large ceramic, porcelain, and natural stone tiles (3-15 mm adhesive thickness) and features:
Key Points:
Excellent adhesion wi
Select options
This product has multiple variants. The options may be chosen on the product page
£6.03 ex. VATArbokol 1000 is recommended for use in expansion joints in brickwork and blockwork, perimeter sealing of timber frames (especially where sealant overpainting is required), and structural joints in heavy cladding. However, it is not suitable for vertical joints wider than 25mm, horizontal joints wider than 20mm, or for internal applications. Due to its relatively slow curing process, Arbokol 1000 should not be used in public areas, schools, or spaces prone to vandalism unless the joints can be securely protected during curing. While the product can be painted, users should conduct a pSelect options This product has multiple variants. The options may be chosen on the product page
