Sika Tarmac Restorer 5L
£22.50 inc. VAT
£18.75 ex. VAT
- Product ID: 488956
- Suitable For: restoring tarmac
- Area of use: INT & EXT
- Application Method: brush/long pile roller
- Time to full cure: 4-6 hours
- Volume: 5L
- Container Type: bottle
- Type: treatment
- Colour: black
- Brand: sika
- Manufactuer: Sika
- Box Size: 1
Sika® Tarmac Restorer is a high-performance, water-based surface coating designed to restore and enhance the appearance of faded or stained tarmac. Once dry, it provides a tough, durable, low-sheen finish that helps protect surfaces from weathering, oil and petrol spills, and weed growth. Easy to apply and fast-drying, most driveways can be used again within 4 hours.
4 Key Points:
- Restores appearance: Revives faded or stained tarmac with a low-sheen finish.
- Tough & durable: Provides long-lasting protection against weathering and everyday wear.
- Protective: Helps resist oil and petrol spills, as well as plant and weed growth.
- Fast-drying: Easy to apply, with most driveways ready for use within 4 hours.
For more in our range of treatments, please click here. For our full range of Sika products, click here.
Alternatively, you can visit Sika website here.
Suitable for
- Tarmac driveways and paths.
- Private car parks
- Residential and commercial surfaces.
LIMITATIONS
- Do not use if rain is imminent within 6 hours.
- Do not use if the ambient air or surface temperature is below +5 °C.
- Do not apply to fresh tarmac. Allow tarmac to dry for a minimum of 3 months before application.
- Do not subject the surface to vehicular traffic within 4 hours of application.
- At lower temperatures, drying times will be significantly extended. Always check that the surface is dry before trafficking.
- Remove oil, petrol or chemical spills from Sika® Tarmac Restorer as quickly as possible using warm water, detergent and a clean cloth.
- Do not use a high-pressure spray to clean Sika® Tarmac Restorer.
- The user is responsible for determining the product’s suitability for use. If in doubt, contact Technical Services for advice.
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PRE-TREATMENT
- Use Sika® Oil Remover to remove oil or grease spills.
- Repair all cracks and damaged areas before application.
- Ensure all surfaces are clean and free from dirt, algae, grease and loose material.
- Surfaces may be damp, but standing water and puddles must be removed.
- Remove lichen or surface mould using Sika® 404 Fungicidal Wash or Sika® Mouldbuster, then clean with fresh water and a stiff-bristle brush.
APPLICATION
- Stir the product well before and during use.
- Apply 2 coats, allowing 4 hours between coats.
- Apply in dry weather using a brush or long-pile roller.
- Apply in an even coat across the entire surface.
CLEANING OF TOOLS
- Clean all equipment immediately after use.
- Use clean water and detergent for cleaning.
3 reviews for Sika Tarmac Restorer 5L
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.28 inc. VAT
£2.73 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.90 inc. VAT
£3.25 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.58 inc. VAT
£7.15 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £13.14 inc. VAT
£10.95 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.07 inc. VAT
£2.56 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £5.26 inc. VAT
£4.38 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £7.02 inc. VAT
£5.85 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
£1,123.92 inc. VAT
£936.60 ex. VAT
£774.00 inc. VAT
£645.00 ex. VAT
£1,208.16 inc. VAT
£1,006.80 ex. VAT
£4,370.11 inc. VAT
£3,641.76 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£8.30 inc. VAT
£6.92 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Mr Aubrey Rowe (verified owner) –
delivery driver failed to deliver. next day driver had no problems
ken swift (verified owner) –
great product
Anonymous (verified owner) –
Excellent communication and service,product as described