Everbuild 565 Clean Room Silicone 295ml

– Food preparation areas.
– Medical and sterile areas.
– Hospital, Pharmaceutical and laboratory environments.
– Perimeter pointing internally and externally of uPVC,
– Wood and powder coated windows.
– Joint sealing to curtain walling & preformed panels.
– Parapet and roof sealing.
– Sanitary applications.

APPLICATION

PREPARATION

All surfaces must be dry and dust free. Therefore, all loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application.

Everbuild 565 Clean Room Silicone does not require priming on most surfaces.

METHOD / TOOLS

If the joint is deep, this can be reduced using Everbuild Fix & Fill Foam, or a backer rod.

Furthermore, ensure that the joint only permits adhesion to two surfaces. Cut the tip of the cartridge using a sharp blade, taking care not to damage the thread. Attach the nozzle and cut cleanly at an angle, with an opening slightly larger than the gap to be sealed.

Apply using a standard sealant gun.

Smooth down within 30 minutes. To ensure the best bond, always smooth the sealant down using a spatula or a piece of wood.

CLEANING OF TOOLS

Uncured sealant – Everbuild White Spirit.
Cured sealant – Everflex Silicone Eater.

LIMITATIONS

– Not for use in conjunction with bitumen. Use Weather Mate.
– Do not use in aquariums, use Aqua Mate.
– Do not use on substrates that may bleed oils.
– Not for use in swimming pool areas.