APPLICATION
SUBSTRATE PREPARATION
All surfaces must be free from dust. Any loose or flaking surface coatings, and any old sealant and mastic joints that may still be present should be removed. Therefore, allowing the product to perform at it’s best.
It is unlikely that priming will be required. However, concrete must be sealed using a Sika Primer 3-N.
LIMITATIONS
– Always use in conjunction with mechanical fixings if using to adhere to overhead fixings.
– In high UV areas; some darkening/discolouration may occur. This does not affect the performance of the sealant
Overpaintability: check compatibility with specific paint first before overpainting large areas.
– Not suitable constant immersion in petroleum/oil
It is the user’s responsibility to determine suitability for use. Also, if in doubt, please contact the Technical Services Department for advice.
– Not for use in aquarium manufacture.
– Do not for use in conjunction with bitumen, or asphalt.
– Yellowing can occur in predominantly dark conditions. However, this does not affect the performance of the products.
g a. (verified owner) –
Covers well and stays flexible. Stays clean and white too. A little difficult to finish neatly – but worth the effort.