Soudal Sealant Remover 400ml

Ideal for;
– The removal of old silicone residue, spilled silicone or spilled MS polymers from an array of surfaces.
– Removes all residue of spilled silicone.

APPLICATION

Apply on dry ground and conditions. Firstly, remove hard putty with a knife, then shake the canister thoroughly and spray the Sealant Remover on the surface needing to be cleaned. Leave to work for at least 10 minutes, wipe dry with a clean cloth, and repeat if necessary. Finish by washing thoroughly with water to avoid surface degradation.

LIMITATIONS

– Can cause staining on porous surfaces.
– Due to a wide variety of plastics and paints, to avoid damage to the surface, a compatibility test is recommended before use.