Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Primer & Cleaners

  • silicone-remover-box-of-12

    Bond-It De-Bond Mate Silicone Sealant Remover – Box of 12

    £37.68

    Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.

    Uses

    Bond-It De-Bond Mate Silicone Sealant Remover can be used to remove old silicone sealant during renovations. It is suitable for use on concrete brick, glass, metals, PVCu and acrylic-based products.

    Application

    Cutaway excess sealant with a knife or sharp blade. Protect any surrounding paintwork with masking tape. Wipe clean with paper tissue or a dry cloth and ensure all traces of solvent are removed.
    Keep some water handy to deactivate any runs. After that, surfaces should be cleaned with a solvent, such as methylated spirit, before applying fresh sealant.

    Limitations

    If in doubt, try a small area first. Furthermore, if the gel comes into contact with water, the active ingredients will be deactivated, and the gel rendered unusable.

    Storage Conditions

    Store in original, unopened containers, out of direct sunlight. Store between 50 C and 25o C.

    For all other Bond-it products on our website, please click here.

    For any further information, you may need on Bond-it, please visit their website here.

  • everbuild-silicone-eater

    Everbuild Everflex Silicone Eater

    £5.99

    Everbuild Everflex Silicone Eater is specifically designed to remove all silicone based sealants and surface water repellents – cured and uncured. The product acts by denaturing silicone polymers, making them easily water or solvent cleanable.

    USES

    – May be used on aluminium* and its alloys, copper and its alloys, iron, steels, glass, ceramics, epoxy composites, most plastics.
    – Has very little effect on rubber and other elastomers.
    – Everbuild Everflex Silicone Eater has little impact on most painted surfaces.

    CHARACTERISTICS / ADVANTAGES

    – Readily denatures silicone.
    – May be used vertically as well as horizontally.
    – Water clean-up.

    APPLICATION INSTRUCTIONS

    SUBSTRATE PREPARATION

    All surfaces must be dust free. Cut as much as possible away from the silicone sealant using a sharp knife. Protect surrounding areas with impervious masking tape.

    APPLICATION METHOD / TOOLS

    Cut the tip of the cartridge with a sharp blade, taking care not to damage the thread. Apply using a standard sealant gun.

    – Removing Silicone sealants from baths/showers:

    Spread the bead over the entire area which requires treatment (use masking tape to protect surrounding areas).  Apply an amount that is at least twice the thickness of the underlying silicone. After that, repeat application if necessary. Wash off with water after 4 hours maximum.

    Note: The product specifically removes silicone products. It may have a lesser effect on acrylics, GP mastics and butyl sealant.

    Apply as in (a) to window panes, frames sills etc. and allow a dwell time of 10 minutes. Wash off with white spirits or water. Repeat if necessary.

    LIMITATIONS

    *TEST A SMALL AREA BEFORE USE. In all cases, apply a small test patch to an inconspicuous area. Leave for 2 hours min and rinse off. Check for staining/corrosion before attempting the whole job.

    In addition, this product may attack nylon, certain fabrics/textiles and coloured anodised aluminium, PU coated baths  & chipped surfaces.

    For all other cleaners on our website, please click here.

    For any further information on Everbuild’s products, please visit their website here.

     

     

  • everbuild-foam-eater

    Everbuild Foam Eater

    £9.99

    Everbuild Foam Eater is a revolutionary paste designed for the safe removal of cured PU foam and adhesives from most substrates. Foam Eater may be used both inside and outside and its paste-like consistency makes it suitable for both vertical and horizontal applications. Foam Eater is especially suitable for removal of foam residues from window and doorframes.

    For all other Everbuild products on our website, please click here.

    For any further information you may need on Everbuild products, please visit their website here.

  • everbuild-yellow-wonderwipes

    Everbuild Heavy Duty Wonder Wipes

    £8.99 £5.00

    Everbuild Heavy Duty Wonder Wipes are designed specifically for the building, engineering and allied trades to clean ingrained dirt from hands, tools and surfaces.

    USES

    Specially designed for the building, engineering and allied trades to clean ingrained dirt from hands, tools and surfaces. Everbuild Heavy Duty Wonder Wipes will easily remove wet and semi-cured paints, sealants, adhesives, bitumen, polyurethanes, expanding foams, polyester fillers, epoxies, oil, grease, petrol and inks.

    CHARACTERISTICS / ADVANTAGES

    – Use on hands, tools and surfaces.
    – Textured for removal of ingrained dirt.
    – Ideal for cleaning up paint, sealant, adhesive, bitumen, expanding foam, oil, grease and much more.

    APPLICATION INSTRUCTIONS

    APPLICATION METHOD / TOOLS

    Remove the lid and pull off foil seal. Thread the wipe from centre of roll through the opening in container and replace the cap. Remove wipes as required. Use the textured side of the wipe to scrub the stained area, and then use the non-textured side for absorbing any excess. Also, re-seal immediately to prevent wipes drying out.

    LIMITATIONS

    – Do not use on porous surfaces such as untreated wood.
    – Do not dispose of wipes in toilets.
    – Use only as directed.
    – In addition. always store in the original container

    It is the user’s responsibility to determine suitability for use. However, if in doubt, contact the technical services department for advice.

    For all other cleaners on our website, please click here.

    For any further information on Everbuilds products, please visit their website here.

  • wonder-wipes-spray-Everbuild Multi-Use

    Everbuild Multi Use Wonder Wipes Spray

    £6.99 £3.69

    Everbuild Multi-Use Wonder Wipes Spray is the ideal cleaning solution for large surface areas. By applying the spray alongside Everbuild Paper Wipe Rolls or alternatively, Multi-Use Wonder Wipes. Wonder Wipes Spray is also ideal for keeping uPVC door and window frames looking immaculately clean. The solution used in this Spray bottle is identical to the same as that which our Multi-Use Wonder Wipes are soaked in, so you can rest assured it has the same cleaning power as the Nation’s No.1 Builders Wipe.

    Benefits

    – Contains a powerful anti-bacterial additive.
    – Works on most common substrates, tools and hands.
    – Ideal for all trades including painters, joiners and window installers

    Limitations

    – Do not use on porous surfaces such as untreated wood or concrete
    – Use as directed.
    – Store only in the original container

    Application

    Spray onto the area that you wish to clean and then wipe with Everbuild Paper Wipe Roll or a similar product. Use immediately on spills to obtain best results.

    Health & Safety

    Consult MSDS for the full list of hazards.

    Shelf Life

    24 months from date of manufacture

    The Everbuild Wonder Wipes range comes in a number of different options, which can all be found below on our website

    Everbuild Wonder Wipes (100 wipes)
    Everbuild Giant Wipes (300 wipes)
    Everbuild Monster Wipes (500 wipes)
    Everbuild Heavy-Duty Wonder Wipes (75 wipes)

    For all other cleaning accessories on our website, please click here.

    For any further information on all Everbuild products, please visit their website here.

  • ndd-wonder-wipes-300

    Everbuild Multi-Use Giant Wipes

    £12.99 £7.99

    Everbuild Multi-Use Giant Wipes are formulated specially to clean hands, tools and any surfaces from adhesive, sealant, expanding foam, bitumen, grease, oil, & even wet or semi-dry paint. These wipes are extremely useful for when there is no water available on site.

    They remove dirt, grime, oil, grease, petrol, inks, food stains, part-cured sealant and paint smears.

    Giant Wipes Uses

    Everbuild Multi-Use Giant Wipes can be used for cleaning a wide range of construction liquids & materials, such as adhesives, oils, sealants, bitumen, expanding foams, grease and even wet or semi-dry paint from hands, tools and surfaces.

    • Contains an anti-bacterial additive that is tested by an independent laboratory to BSEN 1276 for chemical disinfectants and antiseptics
    • Available in standard 100-wipe tubes, 300-wipe tubes, giant 500-wipe tubs and 1L spray
    • Removes finger marks, dirt, grime, oil, grease, petrol, inks, food stains, part-cured sealant and paint smears

    Limitations

    – The manufacturer advises that you do not use these wipes on any porous surfaces.
    – These wipes should not be disposed of down toilets.
    – Excessive periods of skin contact should be avoided for those who have damaged or sensitive skin.
    – It is recommended you contact the technical services department for advice if you have any doubts.

    The Everbuild Wonder Wipes range comes in a number of different options, which can all be found below on our website

    Everbuild Wonder Wipes (100 wipes)
    Everbuild Monster Wipes (500 wipes)
    Everbuild Heavy-Duty Wonder Wipes (75 wipes)
    Everbuild Wonder Wipes Spray (1 Ltire bottle)

    For all other specialist cleaning products on our website, please click here.

    For any further information, you may need, please visit the Everbuild website here.

  • ndd-wonder-wipes-500

    Everbuild Multi-Use Monster Wipes

    £15.99 £12.99

    Everbuild Multi-Use Monster Wipes are formulated specially to clean hands, tools and any surfaces from adhesive, sealant, expanding foam, bitumen, grease, oil, & even wet or semi-dry paint. These wipes are extremely useful for when there is no water available on site.

    They remove dirt, grime, oil, grease, petrol, inks, food stains, part-cured sealant and paint smears.

    Monster Wipes Uses

    Everbuild Multi-Use Monster Wipes can be used for cleaning a wide range of construction liquids & materials, such as adhesives, oils, sealants, bitumen, expanding foams, grease and even wet or semi-dry paint from hands, tools and surfaces.

    • Contains an anti-bacterial additive that is tested by an independent laboratory to BSEN 1276 for chemical disinfectants and antiseptics
    • Available in standard 100-wipe tubes, 300-wipe tubes, giant 500-wipe tubs and 1L spray
    • Removes finger marks, dirt, grime, oil, grease, petrol, inks, food stains, part-cured sealant and paint smears

    Limitations

    – The manufacturer advises that you do not use these wipes on any porous surfaces.
    – These wipes should not be disposed of down toilets.
    – Excessive periods of skin contact should be avoided for those who have damaged or sensitive skin.
    – It is recommended you contact the technical services department for advice if you have any doubts.

    The Everbuild Wonder Wipes range comes in a number of different options, which can all be found below on our website

    Everbuild Wonder Wipes (100 wipes)
    Everbuild Giant Wipes (300 wipes)
    Everbuild Heavy-Duty Wonder Wipes (75 wipes)
    Everbuild Wonder Wipes Spray (1 Litre bottle)

    For all other specialist cleaning products on our website, please click here.

    For any further information, you may need, please visit the Everbuild website here.

  • ndd-everbuild-wonder-wipes

    Everbuild Multi-Use Wonder Wipes

    £7.49 £4.05

    Everbuild Multi-Use Wonder Wipes are specially formulated to clean hands, tools and surfaces from sealant, adhesive, bitumen, expanding foam, oil, grease and even wet or semi-dry paint. These wipes are particularly useful when there is no water on site.

    Removes dirt, grime, oil, grease, petrol, inks, food stains, part-cured sealant and paint smears.

    Wonder Wipes Uses

    Cleaning a wide range of construction materials, such as sealant, adhesive, bitumen, expanding foam, oil, grease and even wet or semi-dry paint from hands, tools and surfaces.

    Limitations

    – It is not advised to use these wipes on porous services, such as untreated wood.
    – Do not dispose of wipes in toilets.
    – Long periods of skin contact should be avoided for those who have damaged or sensitive skin.
    – If in doubt, we advise you to contact the technical services department for advice.

    For all other specialist cleaning products on our website, please click here.

    For any further information, you may need, please visit the Everbuild website here.

  • everbuild-p1-primer

    Everbuild P1 Porous Primer

    £49.99 £39.90

    Everbuild P1 Porous Primer is a copolymer primer for use on porous surfaces before applying all common types of sealants.

    USES

    For use on:
    – Brick
    – Stone
    – Concrete
    – Blockwork
    – Floor Screeds
    – Render

    CHARACTERISTICS / ADVANTAGES

    – Works on most common porous building materials.
    – Acts as a primer for dusty screeds.
    – Works with all common silicone types.

    APPLICATION INSTRUCTIONS

    METHOD / TOOLS

    Apply Everbuild P1 by using a brush in one coat and allow to dry.

    LIMITATIONS

    – Do not use against substrates that bleed oil or plasticisers.
    – Can not be used below +5°C.
    – Do not apply wet or damp surfaces.

    VALUE BASE

    All technical data stated are based on our own laboratory tests. Actual data may vary.

    For other primers & cleaners on our website, please click here.

    For any other information on Everbuild products, please visit their website here.

  • everbuild-np-2-primer

    Everbuild Sealant Primer NP2

    £85.00 £65.00

    Everbuild Sealant Primer NP2 is a solvent based, polyorganosiloxane primer, specifically designed for use on non-porous areas prior to applying all common types of silicone.

    USES for

    – Glass
    – uPVC
    – Aluminium
    – Steel
    – Ceramics

    CHARACTERISTICS / ADVANTAGES

    –  Everbuild Sealant Primer NP2 works on most non-porous materials.
    – Works with all common silicone types.
    – Can also be used with PU and hybrid based sealants

    APPLICATION INSTRUCTIONS

    Coverage will vary according to type and porosity of substrate. As a guide, a 1L tin will cover approx 2.5m².

    APPLICATION METHOD / TOOLS

    Apply one coat with a brush and allow to dry.

    LIMITATIONS

    – Can not be used over bitumen or substrates that bleed oil or plasticizers.
    – Do not use below +5°C.
    – Can not be applied to damp or wet surfaces.

    VALUE BASE

    All information is based on tests done in a laboratory environment. Actual measured data may vary.

    For all other primers & cleaners on our website, please click here.

    For any further information you may need on Everbuild products, please visit their website here.

  • fosroc-galvafroid-thinners

    FOSROC Galvafroid Thinners Cleaner 400ML Tin

    £32.55 £23.99

    Product Description

    FOSROC Galvafroid Thinners Cleaner is a zinc-rich coating formulated & designed as an easily applied, cold galvanising protector against corrosion on all types of ferrous metals. Galvafroid has a mid-grey, matt finish when cured

    Best Uses

    FOSROC Galvafroid Thinners Cleaner is formulated to provide galvanic protection on steel & iron. Galvafroid can be used as a self-finishing or as a durable, rust-inhibiting primer beneath selected topcoats. It is advised to be used for the protection of agricultural and construction plant and machinery, structural steelwork, railings, gates, iron pipework and guttering, and the rust prevention of in-situ welding work.

    Benefits

    – Protects ferrous metals against rust
    – Suitable to be used as a primer or self-finish
    – Easily applied, using either a brush or a roller

    Application

    All ferrous surfaces need to be clean and free from oil, grease, existing coatings & rust. This is best by either grit blasting or thorough wire brushing. Where required, Galvafroid Thinners can be used to increase durability or to enhance the appearance of steel or iron finishes. 

    For all other Fosroc products that are available on our site, please click here.

    For any further info you may require on Fosroc products, feel free to visit their website here.

  • fosroc-ms2-primer

    FOSROC MS2 Primer 750ml

    £87.99 £75.99

    FOSROC MS2 is a two-part priming system used in conjunction with Fosroc Nitoseal sealant range. It is required for use in joints alongside Nitoseal that are set to be intermittently or permanently immersed in water, or where the substrate is likely to be saturated (for example, externally).

    FOSROC MS2 Nitoseal primer is formulated for priming prior to application of the sealant

    Application

    Empty the entire contents of the hardener tin into the base tin, replace the base tin cap. Mix by shaking thoroughly for 2 minutes. Prime the joint face using a dry, clean brush. Avoid over-application of the primer & avoid causing puddles in the bottom of the joint. The sealant should be applied between 30 minutes & 4 hours after the primer has been applied. If the area is not sealed within this time frame, the primer residue will need to be removed by either grit blasting or grinding, before the primer can be reapplied. The mixed Primer MS2 solution must be applied within one working day. Do not use part packs.

    For all other FOSROC products available on our website, please click here.

    For any further information you require or need on FOSROC, please visit their website here.