Everbuild Everflex 125 One Hour Caulk 300ml
- Suitable For: use around skirting boards, ceiling cornices, window and door frames, stair treads and risings and fixtures adjoining walls.
- Area of use: INT
- Application Method: silicone gun
- Volume: 300ml
- Container Type: cartridge
- Type: caulk
- Colour: 3 colours
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Everflex 125 Caulk is a flexible decorators filler and sealant which can be painted with all types of paint, or covered over with wallpaper. No sanding down is required. Remains permanently flexible.
Advantages
– Fast drying – can be overpainted in 1 hour.
– Permanently flexible.
– Easy water clean up.
– Excellent slump resistance.
For application guns, please click here, or for other paintable sealants, please click here.
For further information on any Everbuild products, please visit their website here.
– For sealing cracks and gaps before painting.
– For use around skirting boards, ceiling cornices, window and door frames, stair treads and risings and fixtures adjoining walls.
– Can be used to fill damage plaster.
APPLICATION
SUBSTRATE PREPARATION
All surfaces must be dust free & dry. Substrates that are highly porous, such as new plaster should be primed first with a dilution of Caulk with water. Can be applied to damp surfaces.
APPLICATION METHOD / TOOLS
Cut the tip of the cartridge with a sharp blade, taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 degrees with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. In addition, any excess sealant, etc., can be removed using a sponge and warm water. Furthermore, Everbuild Everflex 125 can be overpainted after 1 hour.
LIMITATIONS
– Not for use in conjunction with bitumen or asphalt.
– Do not attempt to abrade when cured.
– Do not paint until a surface skin has formed.
– For internal use only
– Should not be used in conditions of continuous immersion, below ground level, in areas of high abrasion (e.g. floor joints)
Note: this product is a flexible. Certain inferior quality paints (especially certain vinyl matts) have very little movement in the dry film.
3 reviews for Everbuild Everflex 125 One Hour Caulk 300ml
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
£34.61 inc. VAT
£28.84 ex. VAT -
-
-
-
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Anonymous (verified owner) –
Julia . (verified owner) –
Tim M. (verified owner) –
Great product, but more than that a great seller – communicative and helpful. Will use again!