Bal
Filter Your Product
-
£6.71 - £6.98 ex. VATBAL Micromax Grout-Effect Sealant 310ml – Unique high performance ready to use silicone sealant with built-in Microban® antimicrobial protection for walls and floors Use for• Sealing movement joints in FLOOR and WALL installations. For surface including sanitary, acrylic, fibreglass, glass, glazed, porcelain and painted in dry and wet interior and exterior environments. • Correctly used […]Select options This product has multiple variants. The options may be chosen on the product page -
£17.73 ex. VATBAL Terrace Grout is a high-performance, polymer-modified cementitious grout designed for grouting joints between natural stone and porcelain tiles in external areas. It provides exceptional bond strength and flexibility for joint widths up to 15mm, and is hard-wearing, water- and frost-resistant. Available in four popular colours – Black, Light Grey, Dark Grey, and Beige – it mixes quickly on-site with water to create a smooth finish for external patios, terraces, and paths. Easy to spread with a pot life of 45 minutes, it offers approximately 0.5kg/m² coverage at 5mm joints, cures in 24Select options This product has multiple variants. The options may be chosen on the product page -
£1,063.12 - £1,800.75 ex. VATBAL Board is a specialist magnesium oxide tile backer board with BBA approval, providing a strong, stable and durable background for wall and floor tiling. Water and mould resistant, it will not swell or deteriorate over time, while still supporting loads of up to 100kg/m² despite being lightweight and easy to handle with minimal dust. Around 15–35% lighter than traditional cement-based boards, BAL Board is simple to store, cut and install without specialist tools or fixings, producing minimal dust for a safer working environment. Highly rated by fixers in end-user trials, it is fully backeSelect options This product has multiple variants. The options may be chosen on the product page -
£49.99 ex. VATBAL AF Max Tile Adhesive Grey 17kg - Highly polymer-modified, water/frost-resistant elastomeric tile adhesive with anti-fracture properties. BAL ‘Go Greener’ range of environmentally responsible adhesives. -
£20.78 ex. VATBAL Priming Slurry Bond is a highly polymer-modified, cement-based priming slurry designed to deliver exceptional bond strength when fixing natural stone and porcelain tiles or pavers externally onto BAL Bedding Mortar. Quick and easy to use, it simply requires mixing with water and can also be used to prepare backgrounds prior to receiving mortar beds. Applied wet-on-wet using a trowel, brush, or roller to a minimum thickness of 2mm, the slurry should be applied to the substrate, the top of the bedding mortar, and the back of the tile, slab, or paver. Offering excellent coverage of up to 8m² -
£9.41 - £45.56 ex. VATRapid-setting, rapid-hardening, and highly flexible cementitious this tile grout is ideal for walls and floors, offering superior water and frost resistance along with built-in Microban® antimicrobial protection to prevent mould and mildew growthSelect options This product has multiple variants. The options may be chosen on the product page -
£10.18 - £19.51 ex. VATBAL Grout Wide Joint is a highly flexible, polymer-modified grout with built-in admixture, designed for joints ranging from 3mm to 20mm. It is water- and frost-resistant and sets in approximately 24 hours at 20°C. Suitable for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble, and natural stone, it can be used in both dry and wet interior and exterior environments. BAL Grout Wide Joint is ideal for swimming pools (hard water), areas with limited movement including overlaid plywood floors (minimum 15mm), and heated screeds, following BS Standards for jointSelect options This product has multiple variants. The options may be chosen on the product page -
£21.65 ex. VATBAL Quickset Render is a pre-mixed, polymer-modified cement and sand quick-setting render mortar that sets in just two hours at bed depths of 2–20mm. Designed to prepare wall surfaces prior to tiling with ceramics or natural stone, it is suitable for dry or wet, internal and external environments, and can also be used as a patch repair mortar. Compatible with a wide range of backgrounds including concrete, brickwork, blockwork, lightweight concrete blocks, and plaster, BAL Quickset Render offers fast, reliable preparation with a 30-minute pot life. Simply add water to achieve quicker turnaro -
£18.83 ex. VATBAL Flex One White 20kg – Standard-setting, highly polymer-modified, thixotropic, fluid with shape memory, water/frost-resistant cementitious tile adhesive for walls and floors. Use for • Fixing ceramics, porcelain and vitrified tiles, mosaics, most natural stones excluding moisture sensitive/translucent stone), terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. […] -
£18.46 ex. VATBAL Bedding Mortar is a pre-blended, high-performance cementitious mortar with graded fillers, designed for external use to bed pavers and tiles in accordance with BS 7533-4. Simply mixed with water, it is easy to prepare and apply in a single application at depths from 10mm up to 100mm (minimum 25mm on MOT Type 1). With over one hour of working time and the ability to be walked on after 12 hours, BAL Bedding Mortar provides a durable, freeze–thaw-resistant bedding solution ideal for external porcelain, natural stone, and paving installations on both bonded and unbonded substrates, including -
£16.23 ex. VATBAL SPF S1 Tile Adhesive White 20kg – Standard-setting, highly polymer-modified, water/frost-resistant cementitious tile adhesive for walls and floors. Use for • Fixing ceramics, porcelain and vitrified tiles, mosaics, certain natural stones, terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. NOTE: Certain types of natural stone (i.e. […] -
£29.85 ex. VATBAL Level Out is a high-performance, fast-setting external leveller designed to smooth rough or impact-damaged concrete bases prior to tiling. Easy to use and free-flowing, it can be applied from 2mm to 20mm in a single application and is walkable after just 2 hours and ready for tiling after 3 hours at 20°C. With a 30-minute pot life, reduced water option for gradient levelling, and excellent water and frost resistance, BAL Level Out provides a durable and reliable solution for external levelling projects. Key Points - Fast-setting external leveller for concrete bases - Apply from 2–2