Bal
Filter Your Product
-
£12.16 - £52.51 ex. VATBond SBR is a multi-purpose synthetic polymer primer and admixture for walls and floors that enhances mortar performance by improving toughness, flexibility and tensile strength, allowing thinner applications that reduce overall construction weight. It significantly improves adhesion to backgrounds, increases resistance to water, water vapour, impact and salts, and reduces surface dusting. Bond SBR also improves workability, particularly in hot and humid conditions, with a fast drying time of approximately 15–30 minutes at 20°C. Key points: - Improves strength, flexibility and adhesionSelect options This product has multiple variants. The options may be chosen on the product page -
£23.81 ex. VATXL Floor One is a high-performance floor tile adhesive specially formulated for fixing XL or large-format tiles in both dry and wet interior and exterior environments. Its extended open and working times allow for larger mixes and longer runs without the risk of the adhesive setting too quickly. With a bed thickness of up to 25mm in a single application, it is ideal for patch repairs and levelling small areas, while its improved formulation often removes the need for back-buttering on flat surfaces. Suitable for a wide range of substrates, including difficult or uneven backgrounds, XL Floor On
-
£72.69 ex. VATBal Waterproof 1C is a fast-drying, ready-to-use tanking system for internal wet areas, offering total waterproof protection. It can be applied by brush, roller, or trowel with no mixing required and can be reused if needed. The product allows for one-coat application without priming, provides crack-bridging up to 3mm on floors without tape or matting, and tiles can be applied after just 2 hours, making it ideal for quick and effective internal waterproofing projects. Key Points - Ready-to-use, fast-drying one-coat system for internal wet areas - Applied by brush, roller, or trowel with n
-
£10.68 - £20.46 ex. VATBAL Grout Flex is a highly polymer-modified, water- and frost-resistant grout with a built-in admixture that provides excellent flexibility, high bond strength, and durability. It is suitable for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble, and natural stone in both dry and wet interior and exterior environments. Set in approximately 24 hours at 20°C, it is recommended for joint widths up to 5mm and for use in demanding areas such as hard water swimming pools and power showers. Always follow BS Standards for minimum joint sizes and consult the BAL TSelect options This product has multiple variants. The options may be chosen on the product page
-
£4.20 ex. VATBAL Scrim Tape is a versatile tape designed for internal and external corners, wall junctions, cracks, and board joints, providing a secure seal around pipe penetrations and drainage outlets. Easy to apply, it is suitable for both professional installers and DIY projects, ensuring long-lasting performance and reliability. The 20-meter roll offers ample coverage for a […]
-
£20.93 ex. VATBAL Level Max Grey 25kg – Rapid-setting, high performance single part polymer-modified, protein-free, fibre cementitious leveller for floors. Use for • Laying on absorbent and non-absorbent internal substrates; to prepare most floor surfaces including timber floors prior to installing: o Ceramic & porcelain tiles. o Glass/ceramic/stone mosaic tiles. o Natural stone. o Sheets and soft […]
-
£21.24 ex. VATBAL Supercover Rapidset is a high-performance cementitious non-slip wall and floor adhesive that provides exceptional yield and sets in double-quick time, allowing grouting after just 2 hours. With an open time of 20 minutes and a pot life of 45 minutes, it is suitable for fixing ceramics, porcelain, vitrified tiles, mosaics, certain natural stones, terrazzo, rigid foam insulation, and brick slips in dry or wet interior and exterior environments, including large-format wall tiles and showers. Offering high coverage (approximately 0.96 m² per kg with a mosaic trowel) and fast-drying properti
-
£25.35 ex. VATBAL CTF4 is a polymer-modified, cementitious tile adhesive developed over 50 years, designed for walls and floors. With an extended open time of 30 minutes and a pot life of 5 hours, it is suitable for fixing ceramics, porcelain, vitrified tiles, mosaics, certain natural stones, terrazzo, rigid foam insulation, and brick slips in both dry and wet interior or exterior environments. Recommended for large-format wall tiles and showers, BAL CTF4 is highly water- and frost-resistant and provides improved performance characteristics such as reduced slip. It is suitable for bed thicknesses of 2–6mm
-
£24.46 ex. VATBAL Protective Sealer is a water-based, temporary tile sealer designed to protect tile surfaces from discolouration when using pigmented grouts. Compatible with all BAL grouting products, it is applied prior to grouting and easily removed by washing off once grouting is complete. Suitable for most tile types, BAL Protective Sealer helps prevent staining issues, reducing the risk of costly re-grouting or re-tiling and saving both time and money on site. Key Points - Temporary, water-based sealer to prevent grout staining - Suitable for use with all BAL grouting products - Easily removed b
-
£3.73 - £27.69 ex. VATBAL Grout is a water- and frost-resistant cementitious tile grout designed for grouting ceramics and mosaics in both dry and wet interior or exterior environments, suitable for joint widths up to 3mm and recommended for swimming pools. It's performance can be enhanced by adding BAL ADMIX GT1, which increases flexibility, adhesion, bond strength, and reduces water permeability, with suggested dilutions of 1:1 with water for plywood walls and 1:2 with water for porcelain tiles. Key Points: - Water- and frost-resistant cementitious grout for walls. - Suitable for ceramics and mosaics in drySelect options This product has multiple variants. The options may be chosen on the product page
-
£398.01 ex. VATBAL Rapid-Mat is an advanced fast-track uncoupling membrane designed to accommodate lateral movement in tile installations on floors with limited movement. With only 1mm thickness, it reduces adhesive consumption compared to traditional systems, is lightweight, easy to handle, and ideal for both renovation and new construction projects in domestic and commercial settings. Particularly suitable for heated and timber floors, BAL Rapid-Mat protects against cracks, fractures, and other damage while offering a cost- and time-efficient solution. Available by the roll or metre, it sets a new standard
-
£6.80 ex. VATBAL Waterproof 1C Tape can be used for reinforcing corners and junctions as part of a waterproof system using BAL Waterproof 1C prior to tiling. Suitable for domestic and commercial applications in internal wet environments.
