Concrete
-
£3.39 - £4.44 ex. VATCem-Quik - A cement-based patch repair product that is easy to apply and sets hard in approximately 30 minutes. Suitable for internal and external repairs on most masonry substrates, it works even in cold and wet conditions. CE approved, it is ideal for filling gaps and cracks, jointing and sealing earthenware pipes and drains, patching steps and windowsills, and setting WC’s, sinks, railings, and posts. Simply add water, mix to a smooth mortar, and apply with a trowel or filling knife. Can be applied up to a thickness of 25mm. Key Points: Sets hard in 30 minutesSelect options This product has multiple variants. The options may be chosen on the product page -
£30.46 - £96.68 ex. VATARDEX F 5 is a brilliant white, cementitious, MICROTEC fiber-reinforced fairing coat and lightweight repair mortar designed for versatile internal and external use. It is ideal for edge repairs, filling cavities, cracks, gaps, and holes, as well as for patchwork and repairs on vertical and overhead surfaces. ARDEX F 5 is also excellent for smoothing internal walls and ceilings in preparation for paints, clear protective coats, mineral renders, silicone, and other finishes. Additionally, it can be applied to external facades and shop fronts for effective, long-lasting repairsSelect options This product has multiple variants. The options may be chosen on the product page
-
£30.86 ex. VATARDEX SD-T B base mix is specifically formulated to pre-level concrete surfaces before the application of ARDEX K 80. This Industrial Floor System combines durability, low maintenance, and ease of application with the innovative ARDEX ‘Rapidry Formula,’ which chemically binds the mixed water, enabling the product to dry quickly while developing strength. When thick applications are needed, ARDEX SD-T B can be applied at depths ranging from 6mm to 50mm to achieve a level base, and it allows for a minimum thickness of 5mm of ARDEX K 80 to be applied just hours after its application
-
£66.33 ex. VATMapelastic A+B is a two-component, flexible cementitious mortar specifically designed for waterproofing applications in balconies, terraces, bathrooms, and swimming pools. This mortar combines cementitious binders, finely graded aggregates, special admixtures, and synthetic polymers, creating a user-friendly mix that can be easily applied to various surfaces, even vertically, up to a thickness of 2 mm in a single coat. The cured layer exhibits exceptional flexibility, excellent adhesion to concrete, masonry, ceramics, and marble, and is resistant to harsh environmental conditions, in
-
£96.33 ex. VATMapelastic Turbo is a premium, two-component, rapid-drying waterproofing and crack-isolation membrane designed for both interior and exterior applications beneath ceramic tiles or stone in residential, commercial, and industrial environments that experience intermittent wet or submerged conditions. This cementitious-binder-based membrane, composed of fine-grained selected aggregates, special admixtures, and synthetic polymers in water dispersion, can be easily applied with a roller or brush, creating a robust barrier that protects adjacent rooms and lower floors from water damage. Ex
-
£83.83 ex. VATMapelastic A+B is a two-component, flexible cementitious mortar specifically designed for waterproofing applications in balconies, terraces, bathrooms, and swimming pools. This mortar combines cementitious binders, finely graded aggregates, special admixtures, and synthetic polymers, creating a user-friendly mix that can be easily applied to various surfaces, even vertically, up to a thickness of 2 mm in a single coat. The cured layer exhibits exceptional flexibility, excellent adhesion to concrete, masonry, ceramics, and marble, and is resistant to harsh environmental conditions, in
-
£3.60 - £7.41 ex. VATFire Cement - This buff-coloured, ready-to-use cement has a thick, paste-like consistency and is made from a blend of high-quality clays and selected fillers. Once exposed to heat and air, it sets rock hard and is resistant to high temperatures, withstanding up to 1250°C when cured. It is ideal for use in fitting continuous burning fires, jointing iron flue pipes, building and repairing firebacks, mending cracked bricks in grates and stoves, and pointing between metals and bricks. However, it is water-soluble and should not be used outdoors or in areas exposed to water erosion. &Select options This product has multiple variants. The options may be chosen on the product page
-
£146.89 ex. VATARDEX MVS 95 is a ready-to-use, one-component, water-based dispersion coating available in pre-gauged 12kg units. This pigmented blue coating indicates uniform coverage and becomes waterproof once fully cured. Designed to suppress residual construction moisture in cementitious substrates, including properly prepared power-floated concrete and cement/sand screeds, ARDEX MVS 95 is intended for use as a two-coat system. When fully dry, it creates a membrane that can accommodate hygrometer readings of up to 95% relative humidity (RH) and allows the subsequent application of ARDEX levelin
-
£184.60 ex. VATARDEX PSRS is a solvent-free, two-component epoxy resin with ultra-low viscosity, specifically designed for strengthening and restoring poorly compacted and low-strength screeds that fail to meet the required in-situ crushing resistance value. This product effectively penetrates defective screeds, filling voids created by inadequate compaction and consolidating loose particles. Once cured, the resin-filled substrate delivers a high-strength screed that achieves the highest soundness category as defined in BS 8204-1 for in-situ crushing resistance. ARDEX PSRS is particularly beneficia
-
£12.26 ex. VATBAL Level Plus is a versatile rapid-setting smoothing and levelling compound that can be used as a 1-part system mixed with water for standard substrates, or as a high-performance 2-part system mixed with BAL Level Plus Liquid latex for enhanced moisture tolerance and performance. As a 1-part leveller, it can be applied from 2–12mm over concrete, sand:cement screeds, anhydrite, and old tile adhesive residues, while the 2-part latex system can be used from 2–10mm over more challenging substrates such as bitumen, flooring-grade asphalt, underfloor heating, glazed tiles, existing vinyl (exclu
-
£32.52 ex. VATA lightweight, alkali-resistant glass fibre woven mesh designed for reinforcing render and basecoat plaster. It effectively prevents cracking in rendering systems and is widely used in external wall insulation, roofing materials, and flooring applications. When embedded into wet base coat renders, it provides exceptional strength while remaining economical, tear-resistant, and easy to apply. Ideal for use with waterproof membranes, felts, tile adhesives, and floor coverings to enhance stability and durability. Key Points: Reinforcement & Stability – Strengthens re
-
£14.28 ex. VATFeb Febtank Plug is a fast-acting waterproof repair compound designed to instantly stop active water leaks in concrete and masonry. Ideal for emergency repairs, it sets rapidly even in the presence of running water, forming a strong, durable seal that resists wash-out. Once mixed with water, Febtank Plug produces a stiff mortar that expands slightly […]
