Concrete
-
£31.73 ex. VATARDEX K 15 is a heavy-duty, rapid-drying, self-leveling smoothing compound that is pumpable and designed for efficient leveling and smoothing of various internal subfloors. Thanks to its unique rapid-drying properties, floorcoverings can be applied as quickly as 4 hours after ARDEX K 15 is laid. This product is ideal for leveling and smoothing uneven internal surfaces in a single application, including concrete, cement/sand screeds, porcelain, ceramic, quarry tiles, and anhydrite screeds, before floorcovering installation. It’s commonly used to correct issues like uneven or damaged -
£887.66 ex. VATUltraplan Renovation Screed 3240 is a fibre-reinforced self-levelling compound designed specifically for refurbishing existing floors in both commercial and residential settings. This versatile product can be applied by hand or with a pump, making it suitable for interior levelling, smoothing, and filling in surface differences. Key Points: Fiber-Reinforced: The screed contains fibres for enhanced strength and durability. Versatile Application: It can be applied either by hand or using a pump, allowing for flexibility based on project needs. Interior Use: Specif
-
£7.28 ex. VATBond It Rapid Setting Water Plug is a cement-based, fast-curing, watertight compound designed to plug running water leaks and seal cracks and joints before applying Bond It Tanking Slurry (BDH107). It cures in less than 2 minutes, forming a strong, watertight barrier that can also be used to anchor fixings. To use, cut the holes or cracks into a square shape, mix the compound with water to form a putty, then apply it by hand or with a trowel, pressing it firmly into place until it sets. Once the water stops running, trim the plug flush if needed. Key Points: Seals and f
-
£45.66 ex. VATSikadur-33 is a two-part thixotropic epoxy structural adhesive supplied in a convenient cartridge, designed for use on both horizontal and vertical surfaces without sagging. It provides excellent adhesion to damp concrete and many other construction materials, with a high load capacity and hardens without shrinkage. Additionally, it is styrene-free and environmentally friendly, with an Environmental Product Declaration (EPD) available. Key Points: Excellent adhesion to damp concrete and various construction materials. Thixotropic properties allow for non-sag appl
-
£12.99 ex. VATARDEX Fine Aggregate is a dry, pre-packed, washed, and graded silica quartz sand designed for fully blinding ARDEX products and enhancing bonding in construction applications. Sourced from Leighton Buzzard, Bedfordshire, UK, it is a key component in ARDEX subfloor smoothing compounds and epoxy primers. This versatile aggregate creates a "sandpaper" finish when used for blinding ARDEX R3E, R5E, R6E, and PSRS and ensures strong adhesion when paired with ARDEX epoxy primers and smoothing compounds. For optimal performance, it should be stored in unopened packaging in a cool, dry place,
-
£34.71 ex. VAT
£34.71 ex. VATARDEX A 38 MIX is a specially formulated blend of ARDEX A 38 cement and graded sands, designed for ultra-rapid drying floor screeds in both internal and external locations. Featuring the innovative ‘RAPIDRY PLUS FORMULA’ Technology, this screed allows for foot traffic just 3 hours post-application, and enables the installation of ceramic and natural stone tiles within 4 hours, regardless of thickness, making it perfect for fast-track tiling projects. Resilient floor coverings like carpet, vinyl, and wood can be laid after 48 hours. With rapid strengthening capabilities, ARDEX A 3
-
£12.96 - £57.11 ex. VATAlphaChem Block & Paving Sealer provides a durable penetrative seal to a wide variety of materials, such as concrete, screeds, brickwork, masonry and fibrous sheet materials. The sealer helps protect both new and existing concrete and masonry against pollutants that are both airborne and in water. Benefits - Non-yellowing - Dual Sealing and Curing Action - High Penetration - Suitable to receiving subsequent treatments - Can be used on both horizontal or vertical surfaces - Vapour permeable, allowing the substrate to breath - Provides increased protection to atSelect options This product has multiple variants. The options may be chosen on the product page
-
£20.02 - £87.96 ex. VATSika® Black Jack®-905 All Weather Roof Coating is a solvent-based, full-bodied, black bitumen compound reinforced with fibres, designed for general waterproofing of roofs, guttering (non-plastic), and structural steelwork. It dries to a tough, durable black coating and is resistant to rain wash-off almost immediately, making it ideal for winter use. The product can be applied by brush to a wide variety of roof surfaces. This includes asphalt, built-up felt, concrete decks, cement sheeting, metal sheets (iron, steel, zinc, and lead), slates, and tiles. It may also be combined with rot-proof hSelect options This product has multiple variants. The options may be chosen on the product page
-
£19.36 ex. VATBAL Bedding Mortar is a pre-blended, high-performance cementitious mortar with graded fillers, designed for external use to bed pavers and tiles in accordance with BS 7533-4. Simply mixed with water, it is easy to prepare and apply in a single application at depths from 10mm up to 100mm (minimum 25mm on MOT Type 1). With over one hour of working time and the ability to be walked on after 12 hours, BAL Bedding Mortar provides a durable, freeze–thaw-resistant bedding solution ideal for external porcelain, natural stone, and paving installations on both bonded and unbonded substrates, including
-
£25.26 ex. VATARDEX K 55 FAST is a cutting-edge subfloor smoothing compound formulated for rapid hardening, ideal for projects that require minimal installation time for floor finishes. When mixed with water, it creates an exceptionally fluid, self-levelling mortar that can be applied in a single operation, ranging from a feather edge to a maximum thickness of 10 mm. Depending on the substrate and application thickness, the surface can typically be walked on within approximately 30 minutes at 20°C. Once sufficiently hardened, floor coverings can be installed as soon as 60 minutes later for applic
-
£34.38 ex. VATPlanitop Fast 330 is a rapid-set, fibre-reinforced cementitious levelling mortar suitable for both internal and external applications. This versatile product can be applied in layers ranging from 3 to 30 mm, effectively evening out irregularities on walls and floors. Composed of a grey, one-component formula with very low emissions of volatile organic compounds (EMICODE EC1), it combines special cementitious binders, selected aggregates, synthetic resins, and additives developed in MAPEI’s Research & Development labs. When mixed with water, it offers excellent workability and h
-
£21.68 ex. VATBond It Tarmac Restorer is a ready-to-use, water-based coating for tarmac drives and pathways, designed to restore colour, reduce water penetration, and protect from dirt/grime build-up. Restores tarmac colour Helps protect from water damage Reduces dirt/grime build-up Inhibits organic growth Solvent-free For more in our range of sealants, please click here. For our range of concrete products, click here. To find out more about Bond It and their range of products, you can visit their website here.
