This chloride-free, water-based cementitious flooring compound is designed to provide a level base for internal floors and serves as an ideal, cost-effective underlay for modern floor finishes. It sets hard within 2-3.5 hours depending on temperature, with floor coverings able to be applied 6-8 hours after application. The product is pre-blended, requiring only the addition of water, and is economical to use. It can be applied up to 6mm thickness and is suitable for feathering to a smooth finish. Once mixed, it must be poured onto the subfloor within 20 minutes, and the surface should
Select options
This product has multiple variants. The options may be chosen on the product page
KeraFlex is a cement-based powder, available in grey or white, containing synthetic resins and special additives formulated by MAPEI's R&D labs. When mixed with water, it forms a highly workable, thixotropic mortar that can be applied on vertical surfaces without slumping or tile slipping, even with heavy tiles. It offers excellent adhesion to typical building materials, hardens with minimal shrinkage, and is resistant to water and frost. Additionally, it has an extended open time for ease of application. Tiling done with KeraFlex should be protected from rain, frost, and strong
Select options
This product has multiple variants. The options may be chosen on the product page
Sealacryl - a one component, UV stable, solvent‐based, multi‐purpose roof coating membrane. Specifically designed to prevent the access of water whilst allowing any trapped moisture to escape naturally. Manufactured with fibre reinforcement
BENEFITS
- Excellent adhesion.
- Application in damp weather.
- Instant protection.
- Superb solar reflectivity.
- Reinforced membrane.
- One coat application.
- Seamless.
- Fully flexible.
- Unaffected by temperature.
- Economical.
For other waterproofing products, please click here.
For all oth
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 32 Natural Stone Adhesive is a rapid hardening and drying, white cement-based adhesive classified as C2 FTE S1, which means it is an "Improved deformable fast setting cementitious adhesive with reduced slip and extended open time," according to BS EN 12004. This adhesive is specially formulated for fixing natural stone floor and wall tiles, including moisture-sensitive and uncalibrated natural stones. It can also be used on concrete slabs and ceramic tiles, including porcelain, in both internal and external applications. Remarkably, tiles installed with ARDEX X 32 can be grou
EVERBUILD 710 Febflor Flexiplus Latex is a latex-modified, cement-based powder that, when mixed with water, can be used to level uneven floors and screeds on surfaces such as concrete, existing ceramic tiles, asphalt, brick, and stone. This product is ideal for use prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring, or carpet. It contains powdered latex, eliminating the need for separate latex liquids. When mixed as directed, it forms a free-flowing compound that sets in approximately 90 minutes and can be overlaid after just 8 hours at normal temperatures.
Kerabond T is a cement-based powder available in grey or white, made from fine-grade synthetic resins and special admixtures developed in MAPEI's R&D laboratories. When mixed with water, it forms a trowelable mortar with excellent bonding strength, low slump, and high grab, allowing it to be applied vertically without sagging, even for heavy tiles. It hardens without noticeable shrinkage, providing strong adhesion to standard construction materials. When mixed with Isolastic instead of water, Kerabond T meets the requirements of class C2ES2, a highly deformable cementitious adhes
Select options
This product has multiple variants. The options may be chosen on the product page
Mapeker Rapid-Set Flex is a powder adhesive made from a blend of special cements, selectively graded aggregates, synthetic resins, and setting accelerators that achieve high bond strength within just three hours of application. This quick-setting capability allows for rapid installation of floors and walls, enabling foot traffic after three hours and general use after 24 hours. Once hardened, Mapeker Rapid-Set Flex is both frost-proof and water-resistant, making it suitable for various applications, including the installation of ceramic and porcelain tiles, underfloor heating systems
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 7 G and ARDEX X 7 W are highly versatile, multipurpose tile adhesives designed for a wide range of applications. These adhesives are suitable for fixing ceramic, porcelain, glass mosaics, and most non-moisture-sensitive natural stone floor and wall tiles. Their frost and weather-resistant properties make them ideal for both internal and external use, including wet areas, swimming pools, and areas exposed to harsh weather conditions. The mixed mortar offers a slump-free consistency with high initial grab, allowing for the secure installation of heavy wall tiles without the nee
Select options
This product has multiple variants. The options may be chosen on the product page
Keraquick S1 is a high-performance, quick-setting, deformable cementitious adhesive with no vertical slip for ceramic tiles and stone material stable in the presence of humidity (thickness of adhesive up to 10 mm). With very low emission of volatile organic compounds.
TECHNICAL CHARACTERISTICS
Keraquick S1 is a grey or white powder composed of a blend of special cements, selectively-graded aggregates, synthetic resins and setting accelerators that develop high bond strength only 2-3 hours after installation. For this reason, floors and walls can be used very quickly. Floors are
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 77 and ARDEX X 77 W are advanced, fibre-reinforced, cement-based adhesives available in grey and white. Designed for both floor and wall applications, these MICROTEC products offer exceptional adhesion and flexibility, with an extended open time of up to 60 minutes, double the industry requirement. Their superior slump resistance makes them ideal for fixing large format wall tiles.
Versatility: ARDEX X 77 is perfect for fixing various tile types, including ceramic, fully vitrified tiles, glass mosaics, porcelain, and terrazzo, particularly those with low porosi
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 7 S1 and ARDEX X 7 R S1 W are rapid-setting, flexible adhesives designed for wall and floor tiling applications. These adhesives are highly polymer-modified and feature S1 deformability, utilizing advanced fiber technology to enhance adhesion strength, grab, and non-slip properties. They offer an extended open and working time, accommodating larger mixes and application areas compared to standard rapid set adhesives. Notably, grouting can begin just three hours after installation. Classified to BS EN 12004 C2FES1 as “Improved fast-setting deformable cementitious adhesive wi
Cromapol is a fibre-reinforced liquid acrylic resin dispersed in solvent, designed to prevent water ingress. Its high fibre content allows the coating to bridge small gaps and provide instant waterproofing with just one coat. Cromapol is available in Mid Grey, White, and Black, and also in a fibre-free formula in Opaque, White, and Mid Grey. This versatile product offers excellent adhesion, instant protection, and outstanding solar reflectivity (in White and Grey).
Key Points:
Instant Waterproofing: Single coat application bridges small gaps and provides seamless pr
Select options
This product has multiple variants. The options may be chosen on the product page
£4.57 - £7.57 ex. VATThis chloride-free, water-based cementitious flooring compound is designed to provide a level base for internal floors and serves as an ideal, cost-effective underlay for modern floor finishes. It sets hard within 2-3.5 hours depending on temperature, with floor coverings able to be applied 6-8 hours after application. The product is pre-blended, requiring only the addition of water, and is economical to use. It can be applied up to 6mm thickness and is suitable for feathering to a smooth finish. Once mixed, it must be poured onto the subfloor within 20 minutes, and the surface shouldSelect options This product has multiple variants. The options may be chosen on the product page
