Soudal Repair Express Cement is a fast-drying repair cement with a base of high-speed acrylic polymer, designed for textured finishes. Ideal for swift and convenient repair or filling of cracks and joints in concrete. Application can be done using a trowel or gun. Sands smoothly and can be painted over once fully dried. Suitable for both indoor and outdoor use.
Properties
Excellent Adhesion to Various Mineral Surfaces: Demonstrates strong adhesion on a wide range of mineral surfaces for both indoor and outdoor applications.
Rapid Curing: Cures quickly, allowing f
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX P 10 SR Rapid Hardening Crack Repair Resin Kit is a high-performance, solvent-free, two-component silicate resin system, specifically designed for quick and effective repairs. This polymer-modified resin kit comes complete with stitching pins, mixing and dosing bottles, and protective gloves, making it easy to use for various repair and bonding applications. ARDEX P 10 SR is ideal for rapidly repairing non-structural cracks, sealing joints, and serving as a fast-setting adhesive for a wide range of materials. Its versatile nature makes it suitable for both residential and comme
ARDEX PSRS is a solvent-free, two-component epoxy resin with ultra-low viscosity, specifically designed for strengthening and restoring poorly compacted and low-strength screeds that fail to meet the required in-situ crushing resistance value. This product effectively penetrates defective screeds, filling voids created by inadequate compaction and consolidating loose particles. Once cured, the resin-filled substrate delivers a high-strength screed that achieves the highest soundness category as defined in BS 8204-1 for in-situ crushing resistance. ARDEX PSRS is particularly beneficia
ARDEX ARDURAPID A 45 is a fast-drying, slump-free mortar ideal for a range of internal repairs. This mortar sets in 15 minutes and can be walked on within 90 minutes at 20°C, regardless of application thickness. It is suitable for re-profiling and repairing concrete surfaces, filling cracks, making good around pipework and frames, and forming ramps and coves. When used as a wearing surface, ARDEX ARDURAPID A 45 requires a suitable protective coating.
Key Points:
Rapid Setting and Hardening: Sets in 15 minutes, allowing foot traffic after 90 minutes at 20°C.
Ver
Mapeproof Swell is a one-component hydrophilic paste designed for repair and waterproofing tasks. It can be applied to damp or uneven surfaces and is effective at any temperature, even when water is infiltrating or seeping through. Upon contact with water, Mapeproof Swell expands in volume and can withstand significant hydrostatic pressure when properly confined. It adheres well to slightly damp surfaces, provided they are clean and stable. This single-component hydro-expansive paste is supplied in cartridges and is specifically formulated to create flexible, waterproof seals in crac
Eporip B is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the prot
Select options
This product has multiple variants. The options may be chosen on the product page
Eporip is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protec
Select options
This product has multiple variants. The options may be chosen on the product page