BAL Absolute Grout 2kg
From: £32.50 inc. VAT
£27.08 ex. VAT
- Area of use: EXT & INT
- Application Method: Trowel
- Time to full cure: 16 hours
- Volume: 2kg
- Container Type: Plastic Tub
- Type: Adhesive Grout
- Colour: White, Ebony, Smoke
- Brand: BAL
- Manufactuer: BAL
- Box Size: 1
BAL Absolute Grout is a high-strength epoxy grout and adhesive designed for wall and floor tiling applications where cement-based products do not provide sufficient chemical resistance or bond strength. Classified as an R2 Improved Reaction Resin Adhesive under EN 12004, it is suitable for fixing and grouting a wide range of tile types, delivering a hygienic, waterproof, abrasion-resistant, and durable finish. While not intended for direct food contact, it is ideal for food preparation areas where cleanliness and easy maintenance are essential.
Key Points:
– High-strength epoxy grout and adhesive for walls and floors requiring enhanced chemical resistance
– Classified to EN 12004 as R2 Improved Reaction Resin Adhesive
– Provides hygienic, waterproof, durable, and abrasion-resistant joints
– Suitable for ceramic, porcelain, fully vitrified tiles, mosaics, glass, and resin-backed tiles (technical advice recommended)
SHELF LIFE
12 months under normal dry conditions. Protect from frost and damp.
For more in our range of grouts and adhesives, please click here. For our full range of products from BAL, please click here.
For more information on BAL and their products, you can visit their website here.
Use as an adhesive for
BAL ABSOLUTE GROUT can be used to fix WALL and FLOOR tiles where high levels of adhesive strength and/or chemical resistance are required. It is classified under EN 12004 as an R2 Improved Reaction Resin Adhesive. Suitable for most types of tiles, including:
– Ceramic
– Porcelain and fully vitrified tiles
– Resin-backed tiles (contact BAL TECHNICAL ADVISORY SERVICE)
– Mosaics and glass
– Applicable to INTERNAL and EXTERNAL walls and floors in both DRY and WET environments.
Recommended for:
– Domestic kitchens and worktops
– Bathrooms, domestic and commercial showers including power showers
– Swimming and hydrotherapy pools
– Commercial food preparation areas
– Sports centres
– Hospitals and industrial/chemical plants
– Breweries and dairies
Use as a grout for
BAL ABSOLUTE GROUT is ideal for grouting WALL and FLOOR tiles in areas requiring chemically resistant joints or a hygienic, durable, abrasion-resistant, waterproof finish. While not recommended for direct food contact, it is suitable for food preparation areas where a clean, hygienic surface is essential.
Suitable for most types of tiles, including:
– Ceramic
– Porcelain and fully vitrified tiles
– Mosaics
Recommended for:
– Domestic kitchens and worktops
– Bathrooms, domestic and commercial showers including power showers
– Swimming and hydrotherapy pools
– Commercial food preparation areas
– Sports centres
– Hospitals and industrial/chemical plants
– Breweries and dairies
SURFACE PREPARATION
General
Before fixing wall and floor tiles, ensure surfaces are flat, clean, dry, sound, and free from contaminants or barriers to adhesion. Profiled or porous tiles may show traces of adhesive—conduct a trial if uncertain. Ensure adequate ventilation and avoid use in temperatures below 10°C, above 30°C, or in damp conditions.
APPLICATION
Grouting procedure
Ensure surfaces and joints are clean, dry, and free from debris. Check potential staining by testing a small area; apply BAL PROTECTIVE SEALER if necessary. For delicate or textured tiles, test in an inconspicuous area or consult the manufacturer. Work in small areas using a hard rubber grout float, fully compacting grout and removing excess as you proceed. Clean within 15–60 minutes using a damp sponge or white emulsifying pad, working diagonally to the joints, avoiding pooling water. Remove any remaining haze the following day. Protect newly grouted surfaces in showers and food preparation areas until cured (minimum 2 weeks for showers, chemical resistance achieved after 7 days at 20°C). For external areas, provide protection from weather. For plaster or plasterboard, ensure tile weight does not exceed limits (20kg/m² plaster, 32kg/m² plasterboard); use battens if required.
MIXING
Thoroughly mix the hardener and resin until uniform, then add filler and mix to a smooth, homogeneous mortar. Use a slow-speed propeller stirrer to avoid air entrapment. Back-mix remaining resin and hardener to ensure complete reaction before disposal. Working time/pot life is approximately 60 minutes at 20°C, shorter at higher temperatures, longer at lower temperatures.
APPLICATION
Adhesive procedure
Apply adhesive to the prepared substrate using the appropriate trowel, combing to create a ribbed bed. Press tiles firmly into place with slight twisting/sliding action to ensure full contact; for floors, achieve a solid bed with a minimum 3mm depth. Fix tiles before the adhesive skins (approx. 10 minutes at 20°C), removing any set adhesive and applying fresh if needed. Clean excess adhesive from the tile surface as you work. Grouting is suitable after 16 hours at 20°C.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.