Bond-it Roof Seal Bleed Blocker 2.5L
£24.31 inc. VAT
£20.26 ex. VAT
- Product ID: BDOCRSP2
- Application Method: brush or roller
- Time to full cure: 18 hours @ +18oC
- Volume: 2.5L
- Container Type: tin
- Colour: light blue
- Brand: bond it
- Manufactuer: bond it
Data Sheets
Bond It Seal It Bleed Blocker is a one-part primer is designed to prepare bitumen surfaces, asphalt, and roofing felt before the application of Seal It Liquid Membrane or Easiseal Pro Weatherproofing Compound. It enhances adhesion and overall system performance while providing a quick and easy application process.
Key Points:
– Improves the bond strength of Seal It Roof Seal Membrane and Easiseal Pro to bitumen-based, asphalt, and felt substrates.
– Provides effective surface preparation for liquid waterproofing and weatherproofing systems.
– Quick and easy to apply, helping to reduce installation time.
– Prevents surface staining and bleed-through from bitumen coatings.
Shelf Life – 36 months from date of manufacture when stored in sealed tins.
Storage Conditions – Store in cool, dry conditions between +5oC and +25oC. Protect from frost and direct sunlight.
For more in our range of bitumen products, please click here.
For more in our range of Bond It products, please click here.
For more information on Bond It’s products, you can visit their website here.
Suitable for bitumen based substrates, asphalt and felt substrates
Preparation
– Ensure surfaces are clean, dry, and free from dirt, dust, oil, grease, loose coatings, and other contaminants.
– Remove organic growth and treat with Bond It Mould Stop before priming.
– Do not apply to damp or wet surfaces.
Application
– Apply only when temperatures are above +5°C.
– Stir thoroughly before use to fully disperse pigments and polymers.
– Apply one coat using a brush or roller at the recommended coverage rate.
– Allow to cure fully before overcoating (typically overnight; up to 48 hours in cold conditions).
– The cured coating forms a light blue film for easy coverage identification.
– Apply additional coats only after the previous coat has fully cured.
– Ensure all bituminous surfaces are completely covered before applying Seal It Liquid Membrane.
– Apply a minimum of 2 coats over bitumen substrates; seams and edges may require a third coat.
– For exposed joints and edges, Seal It Cracks and Edging Sealer can be used as an alternative.
– Test a small, discreet area (approx. 1m²) with Seal It Liquid Membrane before full application to check for any adverse reaction with the substrate.
– Any colour of Seal It Liquid Membrane or Easiseal Pro can be used once priming is complete; however, discolouration may occur if primer coverage is incomplete or over water-based bitumen coatings.
– Once cured, apply Seal It Liquid Membrane or Easiseal Pro in accordance with the product instructions.
– For enhanced durability over bitumen substrates, use Seal It Reinforcing Mat within the membrane coating.
Cleaning
– Clean brushes and rollers with soap and water before the material hardens.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.90 inc. VAT
£3.25 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£11.52 inc. VAT
£9.60 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.