Sika Black Jack 906 Roof Emulsion
£33.48 inc. VAT
£27.90 ex. VAT
- Product ID: 852666
- Area of use: EXT
- Application Method: BRUSH
- Volume: 5L
- Container Type: TIN
- Colour: BLACK
- Brand: SIKA
- Manufactuer: SIKA
Sika® Black Jack®-906 Bitumen Roofing Emulsion is a stable bitumen/water emulsion with a medium brushing consistency that dries to a black, flexible coating. It is designed for general waterproofing of roofs, providing protection for surfaces such as concrete, fibre/cement, roofing felt, mastic asphalt, corrugated iron, slates, tiles, lead, copper, and zinc. The product also protects metal components, including pipes and structural steelwork, against corrosion, and can serve as a vapour barrier for cold storage rooms, mushroom houses, and similar installations. Its formulation allows application to damp surfaces, is non-flammable, and can be cleaned up easily with water.
Key Points:
– Provides general waterproofing for a wide range of roof surfaces.
– Protects metal pipes, structural steelwork, and other metallic installations against corrosion.
– Can be used as a vapour barrier for insulation in cold storage and similar structures.
– Medium-brushable emulsion, non-flammable, water clean-up, and suitable for damp surfaces.
Shelf Life – 24 months from date of manufacture in unopened and undamaged containers.
Storage Conditions – Store between +5 and +25 °C. PROTECT FROM FROST.
For more in our range of waterproofing, please click here. For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
USES
– General waterproofing of roofs on a wide range of surfaces, including concrete, fibre/cement, roofing felt, mastic asphalt, corrugated iron, slates, tiles, lead, copper, and zinc.
– Metal protection, offering corrosion resistance for pipes, structural steelwork, and other metallic equipment.
– Insulation, acting as a vapour barrier for cold storage rooms, mushroom houses, and similar installations.
LIMITATIONS
The product may bleed through paints applied over it; a primer recommended by the paint manufacturer should be used before overpainting. Do not apply externally if rain is expected within 5 hours of application. Protect from rain and frost until fully cured (dryness can be checked by rubbing with a wet finger—no brown stain should appear). Avoid use in areas where the surface may come into contact with solvents. Allow adequate drying time between coats. As the manufacturer cannot know all possible applications, it is the user’s responsibility to determine suitability. Contact the Technical Services Department if in doubt.
ECOLOGY, HEALTH AND SAFETY
Users must consult the most recent Safety Data Sheets (SDS) before using the product. The SDS provides guidance on safe handling, storage, and disposal of the product, and includes physical, ecological, and toxicological information.
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
Ensure all surfaces are clean, sound, and free from dust or contaminants that could affect adhesion. Remove algae and fungi using Sika® Mouldbuster. Repair structurally unsound roofs, replacing or fixing loose slates, tiles, or felt. Fill holes or imperfections with Black Jack® 903 Bitumen Trowel Mastic, and secure loose felt with Black Jack® 904 Roof Felt Adhesive. Prime porous surfaces with Black Jack® 902 Bitumen and Flashing Primer and allow to dry before application.
APPLICATION
Stir thoroughly before use. The product is brown when applied and dries black. Apply by brush in at least two coats at 0.75 L/m², brushing coats at right angles to each other and allowing 24 hours between coats. This emulsion can be applied to damp, but not wet, surfaces. For enhanced durability, reinforce the second coat with an open woven glass fibre membrane. Overcoating with Black Jack® 907 Solar Reflective Roof Coating is recommended to extend the life of the finished surface.
CLEANING OF TOOLS
Clean all tools immediately after use with soap and water or Sika® Wonder Wipes. Use white spirit if the product has dried
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £6.64 inc. VAT
£5.53 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £12.01 inc. VAT
£10.01 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.