Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Bathrooms

  • arbo-1081

    Arbo Arbosil 1081

    £3.25

    Arbo Arbosil 1081

    Arbo Arbosil 1081 is a one-part Acetoxy Cure Silicone Sealant which cures upon exposure to moisture vapour to form an elastic rubber silicone. Arbosil 1081 White and Black both contain a fungicide which reduces the likelihood of mould growth in environments such as kitchens, bathrooms and other sanitary applications.

    However, as Arbo Arbosil 1081 Translucent does not contain a fungicide, it is more suitable for projects such as the production of fish tanks and aquariums.

    Main Applications

    Arbosil 1081 White and Black are recommended for use around baths, showers, sinks, washbasins, kitchen worktops and many other sanitary and internal application due to the fungicide present in the sealant.

    However, this Arbosil sealant is also recommended for shop fronts, showcases and glass to glass joints. It is recommended for the production of fish tanks and aquariums (translucent only).

    Application Instructions

    Joint preparation

    The joint surfaces must be dry, clean and free from any contamination. The substrates should be degreased using the appropriate Arbo Cleaner. Primers may be required on some surfaces. It is
    recommended that Arbo Technical Services Department should be consulted, and advice obtained about which primer should be used for specific purposes.

    Joint Backing

    Where applicable, an appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct joint depth. Any joint preparation, priming, and sealant application should be carried out following BS 8000 Part 16. This is the British Standard for the sealing of joints in buildings using sealants.

    Application

    Arbosil 1081 is supplied in polyethylene 310ml cartridges and can be applied into the joint using a sealant application gun.

    Joint Size Suitability

    Joint Width

    Minimum: 6mm
    Maximum: 25mm

    Joint Depth

    Minimum: 10mm on porous substrates
    Minimum: 6mm on non-porous substrates
    Maximum: 15mm

    We stock a wide range of other Arbo products on our website, which are suitable for use in a variety of different projects. We have a sealant or tool for every project.

    For any further information on this specific product please visit the Arbo Website.

  • arbo-hm

    Arbo Arbosil HM

    £2.25

    Arbo Arbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains
    a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces, and will not discolour during its service life, whilst maintaining good elasticity.

    MAIN APPLICATIONS

    This product is recommended for the sealing around all types of sanitary fittings including baths, showers, urinals, sinks and washbasins in both domestic and commercial locations.

    – It is suitable for use in areas of high humidity.
    – Can be used to seal around laminates and worktops.
    – Suitable for both interior and exterior use.
    – Use for sealing of aluminium sheets and components.
    – Use as an adhesive to bond PVC trims

    APPLICATION INSTRUCTIONS

    Joint Preparation

    The joint surfaces must be clean, dry and free from all contamination and any loose materials. The surfaces should be decreased using the appropriate Arbo Cleaner. Primers
    may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to
    the choice of primer for specific purposes.

    Joint Backing

    Where applicable, appropriate joint filler e.g. closed-cell polyethene foam should be used, to provide the correct joint depth.

    Application

    Arbosil HM is supplied in cartridges and can be applied into the joint using an Arbo Caulking Gun. All joint preparation, priming, and sealant application should be carried out
    in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.

    STORAGE LIFE

    12 months in original unopened package stored in a cool, dry place out of direct sunlight. Protect from frost.

    HEALTH & SAFETY

    No particular health hazards are associated with this product but please consult Material Safety Data Sheet for full information.

    You can also find a wide range of other Arbo products on our website.

    For any further information, you may need, please visit the Arbo website.

  • arbo-hm-box-of-25

    Arbo Arbosil HM – Box of 25

    £52.75

    Arbo Arbosil HM Box of 25

    Arbo Arbosil HM is a one-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber, suitable for use in a range of environments.

    Arbosil HM is also resistant to fungus and mildew due to the fungicide present in this sealant. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces, and will not discolour during its service life, whilst maintaining good elasticity.

    MAIN APPLICATIONS

    This product is recommended for the sealing around all types of sanitary fittings including baths, showers, urinals, sinks and washbasins in both domestic and commercial locations.

    – It is suitable for use in areas of high humidity.
    – Can be used to seal around laminates and worktops.
    – Suitable for both interior and exterior use.
    – Use for sealing of aluminium sheets and components.
    – Use as an adhesive to bond PVC trims

    APPLICATION INSTRUCTIONS

    Joint Preparation

    The joint surfaces must be clean, dry and free from all contamination and any loose materials. The surfaces should be decreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted, and advice obtained with regard to the choice of primer for specific purposes.

    Joint Backing

    Where applicable, appropriate joint filler e.g. closed-cell polyethene foam should be used, to provide the correct joint depth.

    Application

    Arbosil HM is supplied in cartridges and can be applied into the joint using an Arbo Caulking Gun. All joint preparation, priming, and sealant application should be carried out
    in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.

    STORAGE LIFE

    12 months in original unopened package stored in a cool, dry place out of direct sunlight. Protect from frost.

    HEALTH & SAFETY

    No particular health hazards are associated with this product but please consult Material Safety Data Sheet for full information.

    You can also find a wide range of other Arbo products on our website.

    For any further information, you may need, please visit the Arbo website.

  • bathroom-and-kitchen-box-of-25

    Bond-It Bath-Mate Bath & Kitchen Sealant – Box of 25

    £44.00

    Bond-It Bath-Mate Bath & Kitchen Sealant

    Bond-It Bath-Mate is a high quality, permanently flexible, water-based sealant with excellent adhesion to plastic, ceramic tiles, wood and porcelain. It can be overpainted and is easy to use. Often this sealant is also used as a method to repair grout and improve the appearance of a tired and worn bathroom or kitchen.

    Uses

    Bond-It Bath-Mate BATH & KITCHEN SEALANT can be used to seal around ceramic baths, sinks and worktops, forming a watertight bond to the surfaces. Contains a powerful anti-fungal compound to prevent mould growth. Easy to apply and any mistakes can be easily rectified with water.

    Preparation

    All surfaces must be clean, dry, sound and free from dust, oil or any other contaminants that may hinder adhesion.

    Priming

    Bond It BATH & KITCHEN SEALANT does not require a primer on most common construction surfaces. To determine whether a primer is necessary, a sample should be tested. Contact Bond It Technical Service Department for recommendations.

    Application

    Apply using a standard sealant gun. Cut tip from the cartridge, be careful not to damage the screw thread. Cut the nozzle at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Smooth down within 15 minutes using a slightly wetted spatula. Remove excess product with a damp cloth. Do not saturate the surface with water, as this will delay curing the process.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Not suitable when:
    – Applied externally during rainy weather.
    – Applied at temperatures below +5°C.
    – Not suitable for plastic baths – use a sealant with greater flexibility.
    – Do not use in joints immersed continuously in water.
    – Can not be used in contact with bituminous products.
    – Used in areas of high abrasion, e.g. floor joints.
    – This product is not a silicone sealant!

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • gp200-box-of-25

    Bond-It GP200 Contractors Grade Silicone – Box of 25

    £48.75

    Bond-It GP200 is a multi-purpose, low modulus silicone rubber sealant with fungicide, suitable for most sealing jobs around the home.

    Uses

    Bond It GP 200 is ideal for sealing in areas of high humidity. Therefore it has excellent adhesion to glass, glazed surfaces, ceramic tiles, many plastics and most paints.

    It is suitable for the following applications – kitchen worktops, bathrooms, showers, utility rooms and general DIY applications.
    – Car
    – Boat
    – Caravan
    – House

    Preparation

    Ensure all surfaces are clean and free from grease. All types of cement, concretes and bare metal surfaces should be primed before the application of the silicone. Timber should be primed and painted.

    Application

    Apply using a sealant gun with the nozzle cut at a 45° angle, and to an opening slightly larger than the joint to be sealed. Smooth using a stick or plastic spatula wetted with a soap & water solution. Can not be applied to wet surfaces, although wetting immediately afterwards will not have any adverse effects. After that, tools can be cleaned in white spirit prior to curing taking place.

    Limitations

    Bond-It GP200  is not suitable for fixing of mirrors or sealing natural marble.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • multi-mate-box-of-25

    Bond-it Multi Mate GP Silicone – Box of 25

    £59.25

    Bond-it Multi Mate GP Silicone is a high modulus, acetoxy cure silicone sealant with fungicide, suitable for most sealing jobs around the home.

    Uses

    Bond-it Multi Mate has excellent adhesion to glass, glazed surfaces, ceramic tiles, aluminium, many plastics and most
    paints. It is ideal for the following applications – kitchen worktops, bathrooms, showers, utility rooms and general DIY applications.
    – Car
    – Boat
    – Caravan
    – House

    Preparation

    Ensure all substrates are dry and free from grease or any contaminants that may hinder adhesion. For best results on movement joints, use a backing material, or a suitable backing tape or rod. All types of concretes and bare metal surfaces should be primed prior to the application of the silicone.

    Application

    Apply using a standard sealant gun with the nozzle cut at a 45° angle, and to an opening that is larger than the joint that is to be sealed. Tool using a piece of smooth wood wetted with soapy water.

    Bond-It Lami-Mate Timber Sealant is a polymer enhanced, flexible sealant and gap-filler designed for sealing all tongue and groove laminate flooring. When cured it can be varnished or wood stained if required.

    Uses

    Bond-It Lami-Mate stays permanently flexible and can be used for sealing all types of laminate and hardwood flooring. It can also be used for sealing around timber window and door frames as well as all types of fitted furniture. For example, bedroom and kitchen fittings, laminate worktops etc. LAMI-MATE is also suitable for sealing glass panels into kitchen unit doors. In addition, it is suitable for internal and external use.

    Application

    Apply using a standard sealant gun. Cut the nozzle at a 45° angle with a sharpe blade, making sure not to damage the thread.  The nozzle should be cut to an opening slightly larger than the joint tha is to be sealed. Smooth down using a slightly wetted spatula, dampened with a soap & water solution.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Do not use in conjunction with bitumen or asphalt. For perimeter use only, do not use in areas subject to mechanical abrasion. Furthermore, do not attempt to sand down.
    Caution: The colour on application will be different from the colour achieved when fully cured.

    Where bare ferrous metals, brass copper, lead or zinc cannot be primed, use Bond It ULTI-MATE Silicone Sealant. Furthermore, do not use on surfaces where water can penetrate through porous materials to affect the bond. Not suitable for fixing mirrors or sealing natural marble.

    Container Size

    EU3 plastic cartridge.

    Colours

    LAMI-MATE comes in 4 colours: teak, pine, dark oak and light oak.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • s3-sanitary-box-of-25

    Bond-It S3 Sanitary Sealant – Box of 25

    £57.75£67.75

    Bond-It S3 Sanitary Sealant is a one-part silicone sealant with excellent adhesion to ceramics, glass, melamine laminates and sanitary plastics.

    Uses

    Bond-It S3 Sanitary Sealant should be used for sealing around basins, bed basins, sinks & to seal shower trays and shower units. In addition, it has been specially designed to seal in damp and humid areas.
    It is ideal for use on:
    – Glass
    – Ceramics
    – Anodised aluminium
    – Lacquered metals
    – Painted timber
    – Painted plaster
    – Sanitary plastics
    – Primed or painted concrete
    – Primed metals

    Preparation

    Ensure all surfaces are dry and free from grease or any contaminants that may prevent adhesion. Remove any old sealant before application.

    Application

    Apply using a standard sealant gun. Using a sharp blade, cut the nozzle at a 45° angle, making sure not to damage the thread. The nozzle should be cut to an opening slightly larger than the joint you wish to seal. For sealing around bathtubs, the bath should be half-filled with water during application & throughout the curing process. If necessary masking tape may be applied. If significant gaps are to be filled, polythene foam, rod or tape should be used to provide support and minimise sealant wastage. Tool the joint within 5 minutes using a wet spatula to give a smooth finish & maximise the strength of the seal.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Do not use on metal or concrete without priming. Not suitable for mirrors. Furthermore, for fixing mirrors use Bond It LN7, MIRROR-MATE or MIRROR-PRO Hybrid Adhesive.

    For all other Bond-It products on our website, please click here.

    For any further information you may need on Bond-It, please visit their website here.

  • Bond-It ZM10 Zero Meko Silicone – Box of 12

    £29.88

    Bond-It ZM10 Zero Meko Silicone is a specially developed sealant that gives off no solvents or corrosive vapours while curing. ZM10 cures quickly under all conditions when exposed to air.

    Uses

    Bond-It ZM10 is suitable for glazing, curtain walling, metal cladding, weather sealing and bonding of high movement joints. Its unique formulation gives exceptional tooling properties and durability. It is also suitable for sanitary applications including baths, showers, sinks and vanity units, etc. Accelerated ageing tests indicate a life expectancy of more than 25 years.
    It is ideal for use on:
    – Glass
    – Ceramics
    – All metals
    – Metal cladding
    – Concrete
    – Painted and unpainted timber
    – Brick
    – Plastics, including PVCu
    – All painted surfaces

    Application

    Apply using a standard sized sealant gun. Cut the nozzle at 45° angle, using a sharpe blade. Cut nozzle to an opening slightly larger than the joint to be sealed. To acheive a technically superior joint, use a polyethene foam backing rod, that is pushed into the joint before sealing. This will also minimuise how much sealant is used.

    Limitation

    Porous surfaces should be primed first. Do not use on substrates where water can penetrate through porous materials. Furthermore, this product is not suitable for use on natural stone where colour bleed may occur, use Bond It “The One” Silicone for these applications.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • bath-&-kitchen

    CM Bath & Kitchen HM

    £5.99

    Details:

    CM Bath & Kitchen is a high modulus silicone sealant that cures rapidly once exposed to natural humidity. Once cured, CM Bath & Kitchens forms to create a permanently flexible, durable sealant which is ideal for use within bathroom and kitchen environments.

    CM Bath & Kitchen is also suitable for use in a range of temperature environments, weathering extremely well and providing a reliable seal in joints. CM Bath & Kitchen is a premium silicone sealant product available in a range of colours, used for exceptional finishes.

    CM Bath & Kitchen meets the standards to BS5889 (1989) Type B and US Fed Spec TTS 001543A (Class A) and TTS 00230C (Class A) and ISO 11600 F&G -25HM 846 food safe.

    Uses:

    The uses of CM Bath & Kitchen are but not restricted to the below:

    • Joints in baths and showers
    • General kitchen areas
    • Food prep areas
    • Laboratories
    • High hygiene areas
    • Construction Joints
    • Swimming pools
    • Glass, ceramic or painted surfaces

    Application:

    Before the application the required area must be cleaned, dust free, contaminate free, and no loose objects are present. If you wish to prime before use, standard primer is advised. If you are re-sealing joints, it is advised that every bit of old sealant is removed to ensure that the joint is contaminant free.

    To apply, cut off the top of the cartridge, ensuring it is above the nozzle thread, proceed to screw the nozzle and snipping the top of the nozzle to required joint size at a 45-degree angle. Apply the sealant by gun – place the nozzle angle flush to the joint and extrude a continuous bead. For a neat finish, use a sealant applicator tool kit.

  • CM Stonesil

    £5.50

    CM Stonesil is an elastic single-component silicone sealant for indoor and outdoor use, with up to 50% movement tolerance.

    Uses and Application Areas

    • Low modulus non-staining sealant with anti-fungal properties.
    • Fast cure rate.
    • Outstanding UV, weather, and ageing resistance.
    • Adhesion to numerous substrates, such as granite, composite stones, ceramic tiles, brickwork, metals, plastics also compatible with copper.
    • Low modulus (conforms to ISO 11600 F&G 25 LM).
    • Movement capability up to 50% (ASTM C920 class 50).
    • Non-staining (ISO 16938-1, ASTM C 1248).
    • Sealing joints in premier bathrooms & kitchens.
    • Glass to glass joints.
    • Sealing glass to metal.
    • Expansion joints in brickwork/stonework.
    • Marine applications.

    Joint dimensions

    The minimum joint size suggested is 5mm x 5mm for internal use and external use 10mm x 8 mm (width x depth). Maximum recommend width of the joint is 30mm x 30mm, but the joint depth should be roughly half the joint width for the ideal seal.

    Tooling

    After applying the sealant, it can be smoothed in the joint with water or with a neutral, non-staining water-based smoothing agent and a suitable tool (e.g., Bond-It Applicator Kit). Smoothing the sealant isn’t just recommended for aesthetic reasons, but it will assist in the bonding of the sealant to the substrate.

  • ct1-sealant

    CT1 Sealant & Adhesive

    £12.95 £10.99

    CT1 Sealant and Adhesive

    The One-Stop Product for all Sealing and Bonding

    CT1 is a construction adhesive that will never shrink or crack and can be structured and painted with any type of paint. Unlike other sealants, CT1 can be applied onto wet surfaces, making it ideal for use underwater in marine projects.

    Due to its ability to work with water, it is also the ideal product to seal baths and shower trays, windows, doors, roofing and guttering. CT1 Sealant and Adhesive is extremely versatile and is often used across multiple different projects by tradespeople. Available in a range of colours, simply select from the drop-down menu: Clear, Black, Brown, Grey, White, Silver, Oak and Beige. For a wide range of internal sealant colours please refer to Mapesil AC.

    As an adhesive, CT1 will create a formidable bond between any substrate, for instance, metals, glass, mirror, fibreglass, plastics, and stone, concrete, the list is endless. CT1 is often the first port of call for a tradesperson looking for a reliable construction adhesive. Above all, the adhesive to use for a multitude of applications is CT1, creating a permanent bond that will resist extreme loads, pressure and tensile strain.

    Order online today, discounts available and trade and credit account options via our website.

  • dc-c50-box-of-12

    Dow Corning C50 High Modulus Bath & Kitchen Silicone – Box of 12

    £40.20

    Box of 12

    Dow Corning C50 is a high modulus silicone sealant, suitable for all sanitary applications & is available in White or Clear.

    HOW TO USE

    Preparation

    Surfaces are to be clean and dry, with no dust or dirt present on the joint. Any old sealant must be removed to avoid contamination and affect the adhesion.

    Priming

    Priming the surface is not required so long as the area of application is nonporous. It is always recommended to do a small test before the complete application is started.
    For more advice, please see the tech data sheets attached or contact for technical assistance.

    Finishing

    If you require finishing or tooling off to the applied DC C50, giving it a smooth and professional. This tooling must be done within 5 minutes. Any longer and the DC C50 will have had time to skin and adhere to the substrate.

    Clean-Up

    The excess sealant may be cleaned off tools and non-porous surfaces while in an uncured state using a universal cleaner. If the sealant is misapplied to porous substrates, it should be left until just cured, and then removed by peeling or cutting from the area.

    Joint Size

    When applying the DC C50, the minimum width should be 6mm.

    6mm to 12mm width – 6mm depth.

    12mm width – depth ratio of 2:1

     

    Please read the product and safety data sheets before use.

    For all other Dow Corning Products on our website, please click here.

    For any further information you may need on this product, please visit Geocels website here.

Bathroom Silicone

Our range of bathroom silicone sealants are highly sought-after, with our team stocking some of the highest quality brands on the market.

Bathroom silicone must be durable, multi-purpose and water and mould resistant. Therefore, when selecting a brand, it is essential to choose a tried and tested provider of bathroom sealants. We stock popular products from Mapei, Bond IT, Soudal and many more.

For those with tired or worn looking grout/sealant, we also stock a range of reviver products ideal for touch-ups without having to replace the sealant.

We have an extensive understanding of bathroom sealants, including products ideal for experienced traders through to one-off DIY jobs people carry out within their own homes. We have products for every requirement, available in both bulk and single orders.

The team at SSL understand bathroom sealants are often required at short notice and so, we provide minimal delivery times, often shipping the products the next working day. For repeat customers we also provide trade and credit accounts where required.

Alongside our bathroom sealants we also stock a variety of tools, making the process even simpler. If you would like some guidance on selecting the right sealant for your bathroom, do not hesitate to get in touch with our professional team.