sika
Filter Your Product
-
£2.53 - £2.69 ex. VATEVERBUILD GRIPTITE is a ready-to-use gap-filling and panel adhesive, formulated with a high bond strength synthetic rubber/resin mix in a solvent carrier. It bonds effectively to a wide range of common surfaces, both indoors and outdoors, including wood, plaster, plasterboard, carpet, metal, glass, ceramics, brick, concrete, cork, uPVC, and certain plastics. The adhesive offers quick drying and high early bond strength. Key Points: Excellent adhesion to most common surfaces. Good early grab, suitable for both horizontal and vertical applications. High solids fSelect options This product has multiple variants. The options may be chosen on the product page -
£3.35 - £15.89 ex. VATEVERBUILD 207 Zeromix C.F.F. is an air-entraining liquid admixture for mortar that acts as an accelerator in sub-zero temperatures. It enhances workability, freeze/thaw resistance, and eliminates the need for a separate frostproofer in bricklaying mortars. This product provides increased frost resistance, is non-corrosive to metal, and improves trowelability, even in cold conditions. It offers resistance to freeze/thaw cycling down to -8°C, reduces bleeding and segregation, and replaces lime in the mix, minimizing lime bloom and efflorescence. Additionally, it reduces shrinkage, accSelect options This product has multiple variants. The options may be chosen on the product page -
£1.65 - £88.97 ex. VATEverbuild 502 Weatherproof Wood Adhesive is suitable for both internal and external use, providing a high-strength, impact-resistant bond that is often stronger than the wood itself. Ideal for general woodworking, joinery, furniture assembly, and household DIY projects, it dries clear and has a fast cure time, with an initial set in just 10 minutes. It boasts excellent bond strength development, high water resistance (D3 Classification), and low timber staining characteristics. Additionally, it is water-based, environmentally friendly, and easy to clean up, making it a versatile andSelect options This product has multiple variants. The options may be chosen on the product page -
£2.90 - £14.29 ex. VATEVERBUILD 201 Mortar Admix is a liquid-plasticising admixture that enhances mortar mixes by forming stable air bubbles, improving workability, and increasing freeze/thaw resistance in bricklaying mortars. It reduces the need for lime, smooths out variations between different batches of sand and cement, and outperforms traditional Vinsol Resin-based plasticisers. This admixture also provides resistance to freeze/thaw cycling down to -2°C, improves trowelability, and reduces bleeding, while being chloride-free (less than 0.1% chloride ion content) and minimizing the potentialSelect options This product has multiple variants. The options may be chosen on the product page -
£5.39 - £25.76 ex. VATEVERBUILD 203 Accelerator & Frostproofer is a liquid additive that accelerates the setting and hardening of mortar, concrete, screeds, and rendering while providing frost protection during the curing process. It remains effective even in sub-zero temperatures and is ideal for situations requiring rapid setting. This product is also used as a plugging admixture, ensuring faster finishing times in cold weather, while protecting against frost damage down to -8°C in wet mortar. Key Points Accelerates setting and hardening times, even in cold weather. Provides frSelect options This product has multiple variants. The options may be chosen on the product page -
£2.84 - £14.13 ex. VATFeb Febmix Admix SW is a liquid air-entraining plasticiser specifically designed to address the varying qualities of sand, cement, and water in South Wales and the West Country. It enhances mortar by providing a stable and uniform air bubble structure, improving resistance to freeze/thaw damage, reducing segregation and bleed, and increasing workability. It works with most types of Portland Cement and challenging sands, can replace lime, and is compatible with P.F.A.-containing mortars, offering easier and faster mortar application. Key Points: Provides aSelect options This product has multiple variants. The options may be chosen on the product page -
£6.44 ex. VATEVERBUILD OPTI-MIX INTEGRAL WATERPROOFER is a versatile, all-in-one solution that functions as a plasticiser, waterproofing agent, and salt inhibitor. This concentrated formula is easy to use and ensures consistent results with no waste, providing 25 times the coverage of standard waterproofers (1L = 25L of standard waterproofer). It improves the water resistance of mortars, enhances workability, and offers protection against freeze/thaw cycles, making it an ideal choice for construction projects. Key Points: Improves Water Resistance – Boosts the water resistance -
£5.68 ex. VATEVERBUILD® Stain Block is a heavily pigmented white spray paint designed to permanently prevent existing stains, such as water marks, mould, rust, nicotine, grease, soot, and pen marks, from bleeding through subsequent coatings. Its easy-to-apply aerosol formula works effectively on most household and commercial surfaces, providing quick and easy coverage with its highly pigmented formula. Key Points: Easy Application: Convenient aerosol formula for hassle-free use. Wide Surface Compatibility: Suitable for most household and commercial surfaces. Heavi -
£7.95 ex. VATEVERBUILD 506 Contractors PVA is a versatile multi-purpose product designed for use as a primer, sealer, cement filler, and plaster admixture. It adheres effectively to most common building and DIY materials (excluding PVC and rubber) and is ideal for priming unsound surfaces, acting as an adhesive for porous materials, sealing dust on flaking paint or walls, and enhancing cement mixes. This product improves both adhesion and flexibility in various applications. Key Points: Acts as a primer for preparing surfaces before plastering or painting. Serves as an adhesi -
£11.68 ex. VATSikafloor-122 Level Universal is a one-part, ready-to-use, cement-based self-levelling compound designed for smoothing and levelling uneven rigid internal floors before installing final coverings such as carpets, sheet vinyl, tiles, laminates, or timber. With excellent self-smoothing properties, low shrinkage, and easy application by pump or manually, it provides a hard, smooth surface that is protein and formaldehyde-free. It offers a 2-4 hour walk-on time at 20°C and can be overlaid in approximately 8 hours, maintaining good workability and joint healing throughout application. -
£10.96 ex. VATSika AnchorFix-1 is a solvent and styrene-free, two-component polyester anchoring adhesive, offering fast curing and high load capacity. It is compatible with standard guns, can be applied at low temperatures, and remains non-sag even in overhead applications. Additionally, it has low odor, minimal wastage, and is ETA-approved for reliability. Key Points: Fast & Efficient: Quick curing with high load capacity. Versatile Application: Works with standard guns, even at low temperatures. User-Friendly: Non-sag formula, low odor, and minimal wastage. Certifi -
£7.80 ex. VATEB25 is engineered with cutting-edge technology and a unique polymer blend, EB25 is a truly universal hybrid designed for interior and exterior applications, including sanitary and food preparation areas (ISEGA certified). Its exceptional flexibility, high bonding strength, and waterproof capabilities ensure it sticks to almost any surface—even underwater—and cures to provide resistance against mould, chemicals, petrol, temperature extremes (-40°C to +100°C), and UV radiation, all while maintaining low emissions (EMICODE EC1plus). With incredible initial grab, no slip, gap-fillSelect options This product has multiple variants. The options may be chosen on the product page