smoothing
-
£25.26 ex. VATARDEX K 55 FAST is a cutting-edge subfloor smoothing compound formulated for rapid hardening, ideal for projects that require minimal installation time for floor finishes. When mixed with water, it creates an exceptionally fluid, self-levelling mortar that can be applied in a single operation, ranging from a feather edge to a maximum thickness of 10 mm. Depending on the substrate and application thickness, the surface can typically be walked on within approximately 30 minutes at 20°C. Once sufficiently hardened, floor coverings can be installed as soon as 60 minutes later for applic -
£21.38 ex. VATARDEX K 11 is a rapid hardening, free-flowing leveling and smoothing compound specifically designed to address a variety of sub-floor types, including cement/sand screeds, gypsum screeds, and concrete. This versatile product can be applied in a single layer up to a maximum thickness of 10mm, while still maintaining its excellent free-flowing properties even at thinner applications of just 2mm. Ideal for preparing uneven internal sub-floors before installing various floor coverings, ARDEX K 11 dries to a virtually tension-free layer. Under optimal conditions at 20°C, it allows for th
-
£65.95 ex. VATARDEX AF 148 is a versatile, water-based, solvent-free acrylic adhesive designed for installing a variety of vinyl floorcoverings in commercial and domestic spaces. It provides a high bond strength with long-lasting tack, an extended working time of up to 3 hours, and is highly resistant to biodegradation and plasticiser migration. Additionally, it meets the EMICODE "EC1 PLUS" standards for ultra-low emissions, ensuring safety and environmental compliance. Key points: Extended Working Time: Offers up to 3 hours of application time, allowing for flexibility during in
-
£11.40 ex. VATLatexplan Trade Fast is a two-part cement-based smoothing compound that comprises a grey powder (part A) made from special cements, graded silica sands, and additives, which is mixed with a synthetic rubber latex (PART B). This compound can withstand foot traffic after approximately 60 minutes and is ready for floor coverings installation within 2½ to 3 hours, depending on the thickness and ambient temperature. It has a very low odour, making it suitable for use in confined spaces and inhabited areas where ongoing activities must continue. Additionally, Latexplan Trade Fast is moist
-
£30.46 - £96.68 ex. VATARDEX F 5 is a brilliant white, cementitious, MICROTEC fiber-reinforced fairing coat and lightweight repair mortar designed for versatile internal and external use. It is ideal for edge repairs, filling cavities, cracks, gaps, and holes, as well as for patchwork and repairs on vertical and overhead surfaces. ARDEX F 5 is also excellent for smoothing internal walls and ceilings in preparation for paints, clear protective coats, mineral renders, silicone, and other finishes. Additionally, it can be applied to external facades and shop fronts for effective, long-lasting repairsSelect options This product has multiple variants. The options may be chosen on the product page
-
£12.26 ex. VATBAL Level Plus is a versatile rapid-setting smoothing and levelling compound that can be used as a 1-part system mixed with water for standard substrates, or as a high-performance 2-part system mixed with BAL Level Plus Liquid latex for enhanced moisture tolerance and performance. As a 1-part leveller, it can be applied from 2–12mm over concrete, sand:cement screeds, anhydrite, and old tile adhesive residues, while the 2-part latex system can be used from 2–10mm over more challenging substrates such as bitumen, flooring-grade asphalt, underfloor heating, glazed tiles, existing vinyl (exclu
-
£61.48 ex. VATThe addition of ARDEX E25 Mortar Admix to ARDEX subfloor smoothing compounds is recommended for applications requiring high abrasion or point load resistance, such as temporary wearing surfaces or when applying floor paint or coatings (with compatibility testing and trial applications). It is also ideal for floors with underfloor heating, ensuring the heating is off for 48 hours before and after screeding and then gradually brought up to temperature. Additionally, ARDEX E25 is used with ARDEX K 15 Rapid Drying Self-Levelling Compound to enhance strength and durability, particularly w
-
£54.51 ex. VATThe use of ARDEX E 25 Mortar Admix in conjunction with ARDEX sub-floor smoothing compounds is advisable in specific situations: when high abrasion or point load resistance is necessary, for temporary wearing surfaces, when a floor paint or thick coating will be applied later (ensure compatibility and conduct a trial application), and when the floor has underfloor heating. For floors with underfloor heating, it is essential to turn off the heating for 48 hours before applying the screed, leave it off for another 48 hours after application, and then gradually increase the temperature.
-
£55.65 ex. VATARDEX A 826 is a brilliant white, rapid-hardening, gypsum-based plaster designed to create a smooth, ultra-fine finish on interior walls and ceilings, perfect for achieving a true feather-edge finish. It provides an ideal base for paint and wallpaper, with a non-shrink, tension-free formulation that resists cracking even in thin applications. This plaster can be painted within an hour, making it highly efficient for creating a high-quality, smooth surface on a range of substrates, including plasterboard, pre-rendered walls, concrete backgrounds, aerated concrete, lightweight blocks,
-
£16.39 ex. VATLatexplan Trade Fast is a two-part cement-based smoothing compound that comprises a grey powder (PART A) made from special cements, graded silica sands, and additives, which is mixed with a synthetic rubber latex (part B). This compound can withstand foot traffic after approximately 60 minutes and is ready for floor coverings installation within 2½ to 3 hours, depending on the thickness and ambient temperature. It has a very low odour, making it suitable for use in confined spaces and inhabited areas where ongoing activities must continue. Additionally, Latexplan Trade Fast is moist
-
£26.98 ex. VATUltraplan Eco 3210 is a grey powder formulated from special cements with rapid setting and hydration properties, combined with graded silica sand, resins, and additives developed in MAPEI's Research and Development Laboratories. When mixed with water, it transforms into a highly fluid and workable mortar that self-levels, adheres strongly to substrates, and dries quickly. Ultraplan Eco 3210 can be applied using an automatic pressure pump over distances exceeding 100 meters and can be spread in thicknesses of up to 10 mm per coat without shrinkage, cracking, or crazing. It achieves hi
-
£24.08 ex. VATRapid Level CT 3220 is a fast setting smoothing and levelling compound designed for both new and existing floors in commercial and domestic settings. This grey powder, composed of special cements, graded silica sands, resins, and unique additives developed in MAPEI's R&D laboratories, becomes a highly fluid and workable mortar when mixed with water. Rapid Level CT 3220 allows for trowel application and can be laid in thicknesses ranging from 3 to 20 mm in a single coat, making it ideal for a variety of flooring projects. Notably, it is compatible with underfloor and under-tile he
