watertight
Filter Your Product
£98.33 ex. VATARDEX S 7 PLUS is a waterproof and tanking coating system designed to be applied before fixing ceramic tiles with an appropriate ARDEX adhesive. It creates a watertight seal for swimming pools, ensuring they remain free from leaks. The system resists water pressures up to 5 bar, and tiles can be applied to the second coat just 4 hours after application. ARDEX S 7 PLUS is easy to use—simply add water and apply by trowel for a smooth finish. It is fibre-reinforced for enhanced strength and flexibility, making it suitable for both internal and external swimming pools. Key- £35.59 ex. VATEverbuild Aquaseal Waterproof Tanking Membrane is a ready-to-use, non-hazardous, and solvent-free liquid waterproofing compound that creates a permanently flexible and watertight membrane for floors and walls in wet areas like showers, wet rooms, balconies, and partially covered external spaces. It is applied as a two-coat system by brush, dries quickly, and allows tiling to commence after just 12 hours. Suitable for a wide range of common building substrates, including plasterboard, MDF, plywood, concrete, and wet room boards, it can be used alone or as part of the Aquaseal Wet Room
- £6.93 ex. VATBond It Rapid Setting Water Plug is a cement-based, fast-curing, watertight compound designed to plug running water leaks and seal cracks and joints before applying Bond It Tanking Slurry (BDH107). It cures in less than 2 minutes, forming a strong, watertight barrier that can also be used to anchor fixings. To use, cut the holes or cracks into a square shape, mix the compound with water to form a putty, then apply it by hand or with a trowel, pressing it firmly into place until it sets. Once the water stops running, trim the plug flush if needed. Key Points:Seals and f
- £47.28 ex. VATMapeproof Swell is a one-component hydrophilic paste designed for repair and waterproofing tasks. It can be applied to damp or uneven surfaces and is effective at any temperature, even when water is infiltrating or seeping through. Upon contact with water, Mapeproof Swell expands in volume and can withstand significant hydrostatic pressure when properly confined. It adheres well to slightly damp surfaces, provided they are clean and stable. This single-component hydro-expansive paste is supplied in cartridges and is specifically formulated to create flexible, waterproof seals in crac
£54.73 - £268.15 ex. VATFR Window & Door Sealing Membrane + (ME007) is a Class B, permanently UV resistant, high strength polyester, airtight and fully watertight membrane used as a perimeter membrane seal to the external side of glazed units such as windows and doors. When correctly installed with illbruck FR Membrane Adhesive (SP025), it provides an air and fully watertight seal over the construction joint which remains breathable to enable any trapped incidental moisture or condensation to escape out through to the external side of the wall construction. It can also be used to seal and protect horizontal and vSelect options This product has multiple variants. The options may be chosen on the product page
