BAL Grout Wall White
From: £4.26 inc. VAT
£3.55 ex. VAT
- Area of use: EXT & INT
- Volume: 1.5kg, 3.5kg, 10kg, 20kg
- Type: Grout
- Colour: White
- Brand: BAL
- Manufactuer: BAL
- Box Size: 1
BAL Grout is a water- and frost-resistant cementitious tile grout designed for grouting ceramics and mosaics in both dry and wet interior or exterior environments, suitable for joint widths up to 3mm and recommended for swimming pools. It’s performance can be enhanced by adding BAL ADMIX GT1, which increases flexibility, adhesion, bond strength, and reduces water permeability, with suggested dilutions of 1:1 with water for plywood walls and 1:2 with water for porcelain tiles.
Key Points:
– Water- and frost-resistant cementitious grout for walls.
– Suitable for ceramics and mosaics in dry or wet interior/exterior environments.
– Supports joint widths up to 3mm and recommended for swimming pools.
– Performance enhanced with BAL ADMIX GT1 for flexibility, adhesion, and water resistance.
SHELF LIFE
12 months under normal dry conditions. Protect from frost and damp.
For more in our range of grouts, please click here. For our full range of products from BAL, please click here.
For more information on BAL and their products, you can visit their website here
Suitable for grouting ceramics and mosaics in both dry and wet interior or exterior environments. Ideal for joint widths up to 3mm and recommended for swimming pools. Additional applications are possible by incorporating BAL ADMIX GT1, which enhances flexibility, adhesion, bond strength, and reduces water permeability. Suggested ratios:
Plywood walls: BAL ADMIX GT1 diluted 1:1 with water
Porcelain tiles: BAL ADMIX GT1 diluted 1:2 with water
Restrictions
Not suitable for food preparation or storage areas, spas, jacuzzis, chemical plants, power showers with body jets, or any application requiring fully waterproof grouting.
MIXING
Use a BAL MIXING BUCKET or another suitable container.
1. Gradually add approximately 3 parts powder to 1 part clean cold water by weight (refer to table in data sheet).
2. Mix thoroughly until a smooth, lump-free mortar is achieved.
3. Allow the mixture to stand for 2–3 minutes, then remix for 30 seconds. Avoid introducing air by mixing too vigorously or over-mixing.
APPLICATION
Grouting Procedure
1. Check for potential staining: apply grout to a small trial area on a few tiles. If discolouration occurs or grout is difficult to clean, treat the area with BAL PROTECTIVE SEALER and repeat the trial.
2. Work in small sections using a BAL GROUT FLOAT or squeegee. Completely fill the tile joints with grout, compacting thoroughly and removing excess grout as you go.
3. Allow approximately 15 minutes for the grout to dry at 20°C, or until the surface is dry to the touch (not fully cured).
4. Clean the tile surface diagonally to the grout lines using a damp sponge or sponge board, rinsing frequently with clean water. Avoid allowing water to enter ungrouted joints.
5. Once the grout has set in the joints, polish the tile surface with a clean, dry cloth. For faster results, use a BAL WASH BOY.
6. Remove any remaining haze the following day using water and a BAL EMULSIFYING PAD and gripper.
7. Allow a minimum of 24 hours before exposing the tiles to normal use.
NOTE:
– For swimming pools, do not fill for at least 3 weeks after grouting. Contact BAL TECHNICAL ADVISORY AND SPECIFICATION SERVICE for guidance.
– For showers, do not use for at least 2 weeks after grouting.
CLEANING
Always use cleaning products suitable for the specific tile type. For long-term antimicrobial protection, regularly clean with BAL MICROSHIELD TILE CLEANER, which contains Microban® antimicrobial protection.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.