Bond It Bitumen Paint
£7.80 inc. VAT
£6.50 ex. VAT
- Suitable For: the protection of ferrous and non-ferrous metals, concrete, roofing felts, etc
- Area of use: EXT
- Application Method: brush/roller/spray
- Time to full cure: 6 hours
- Volume: 1L, 2.5L, 5L, 25L
- Container Type: tin
- Type: paint
- Colour: black
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Bond It Bitumen Paint is a bituminous black paint for the waterproofing and weather protecting of steelwork and concrete. Used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood, against water. Surfaces to be painted must be completely dry and clear of loose material and any corroded areas primed prior to application.
Storage Life
Minimum of 5 years from date of manufacture under good storage conditions in original unopened containers. Store under cover away from sources of heat and ignition. Keep containers sealed when not in use.
For all other Bond-it products on our website, please click here. For our full range of roofing products, click here.
For any further information you may need on Bond-it, please visit their website here.
Bond It Bitumen Paint is used for the protection of ferrous and non-ferrous metals, concrete, roofing felt, fibre/cement, corrugated iron, asphalt and wood, against water. Reduces corrosion and decay.
APPLICATION
BITUMEN PAINT is supplied ready for use and should not require thinning. Apply at least two coats by brush, roller or spray allowing each coat to dry before applying the next coat. Note: At very low service temperatures the coating will become less flexible, while at high temperatures it becomes soft and less resistant to degradation by the environment and will ultimately flow.
Drying Time
Approximately 6 hours depending on drying conditions.
LIMITATIONS
- Do not use in areas where subsequent solvent contact is likely.
- Do not use for potable drinking water tanks.
- Allow sufficient drying time between coats.
- Bitumen paint may bleed through any paints subsequently applied over it. Apply a primer recommended by the paint manufacturer before overpainting.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m | up to 2,5 m | up to 3,5 m | up to 4,5 m | up to 2,5 m | up to 3,5 m | up to 4,5 m | |
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm | Minimum witdth of joints for a inner mounting b in mm | |||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) | 15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.28 inc. VAT
£2.73 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £2.64 inc. VAT
£2.20 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £6.64 inc. VAT
£5.53 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £2.52 inc. VAT
£2.10 ex. VAT
From: £11.64 inc. VAT
£9.70 ex. VAT
£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal£23.04£18.11 inc. VAT£19.20£15.09 ex. VATBond It Trowel Mastic can be applied to most common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, cast iron, fibre/cement, slates, lead, copper, zinc, concrete and timber. Fibre reinforced making it ideal for filling cracks and holes and cures to give a strong and flexible compound. Storage LifeMinimum of 5 years from date of manufacture under good storage conditions in original unopened containers. Store under cover away from sources of heat and ignition. Keep containers sealed when not in use. For all other Bond-it-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here.For any further information, you may need on Bond-it, please visit their website here.
Reviews
There are no reviews yet.