FOSROC Colpor 200PF
£96.59 inc. VAT
£80.49 ex. VAT
- Product ID: COLPOR
- Suitable For: the horizontal sealing and maintenance of joints in concrete roads, runways and hard standings
- Area of use: INT & EXT
- Application Method: barrel gun
- Volume: 5L
- Container Type: tin
- Type: sealant
- Brand: FOSROC
- Manufactuer: FOSROC
- Box Size: 2
Fosroc Colpor 200PF is a two-part polyurethane sealant that is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Fosroc Colpor is resistant to oil and hydraulic fluid spillage. It will not harden in cold weather nor become excessively soft or pick up in hot conditions. Furthermore, Colpor 200PF has high durability and long service life which reduces maintenance costs. Sold per unit – two parts to a unit “Box of 2”.
ADVANTAGES
– Cold applied – no heating required
– Fuel, oil and hydraulic fluid resistant
– Self-levelling
– Tough, rubbery seal
– High performance – less maintenance
For all other Fosroc products on our website, please click here.
For any further information on Fosroc products, please visit their website here.
For the horizontal sealing and maintenance of joints in concrete roads, runways and hard standings. The excellent fuel resistance of Colpor 200 makes it particularly suitable for sealing areas where fuel and oil spillage might occur, such as:
– Aircraft fuelling areas
– Oil terminals
– Garage forecourts
– Parking and cargo areas
– Docks and harbours
– Warehouses
MIXING
Drain the curing agent into the large base tin. Always use a handheld, slow speed drill (400 to 500 rpm) fitted with a Fosroc paddle blade
stirrer. Mix for approximately one minute, stop the mixer and scrape around the top of the tin to remove any remaining curing agent. Continue mixing for a further 3- 4 minutes until the material is mixed thoroughly.
APPLICATION
When mixed, the sealant may be loaded into a 600ml barrel gun after removing the nozzle and cap then pulling back the plunger rod. Apply the material directly into the joint, making sure the top of the sealant is recessed below the concrete edge & not level.
4 reviews for FOSROC Colpor 200PF
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
From: £34.99 inc. VAT
£29.16 ex. VAT -
-
-
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Matthew Lewis (verified owner) –
S M. (verified owner) –
Good product, easy to mix and apply
Matthew Lewis (verified owner) –
Anonymous (verified owner) –
great service