illbruck WD120 Weather Proof PVA
From: £118.15 inc. VAT
£98.46 ex. VAT
- Suitable For: wood, laminate, chipboard, blockboard, veneers ect
- Area of use: EXT & INT
- Application Method: brush, roller or spray
- Volume: 1kg, 5kg, 25kg
- Container Type: plastic bottle
- Type: wood adhesive
- Colour: white, dries clear
- Brand: illbruck
- Manufactuer: illbruck
- Box Size: 1
WD120 is a premium, weatherproof PVA adhesive developed for high-performance bonding in furniture manufacture and general woodworking. Suitable for both internal and external use, it provides excellent water resistance and is ideal for bonding wood, decorative laminates, chipboard, blockboard, veneers, and similar materials. WD120 delivers rapid bond formation with high final strength and is suitable for a wide range of application and curing methods, including load-bearing uses.
Key Points
– Weatherproof PVA adhesive meeting EN 204 (D3) requirements
– Suitable for load-bearing applications; tested to BS 4071 for creep resistance
– Compatible with RF curing, hot and cold pressing, and brush, roller, or spray application
– Fast bond development with high final bond strength
Storage – Store in shaded, dry conditions at temperatures between +5°C and +25°C.
Shelf Life – 12 months when stored as recommended in the original, unopened container.
For more in our range of wood adhesives, please click here. For our full range of products from illbruck, please click here.
For more information on illbruck and their products, you can visit their website here.
Suitable for:
– Interior and exterior applications
– PVA wood adhesive for bonding wood, decorative laminates, chipboard, blockboard, veneers, and similar substrates
– Performs well in high-humidity indoor environments
– Indoor or outdoor use where intermittent contact with cold or hot water may occur
– Commonly used in furniture manufacture and staircase installation
Preparation
• Ensure all bonding surfaces are close fitting, clean, degreased, and free from dust or any other contaminants.
Application
• Remove any skin from the adhesive surface and stir thoroughly before use.
• Apply adhesive to one surface only using a brush or roller.
• Allow an open time of approximately 5 minutes, depending on ambient conditions.
• Assemble components within the open time, as soon as practical.
• Apply pressure immediately after assembly while the adhesive is still wet.
• Recommended press time is 14–20 minutes at 20 °C.
• When using a heated press at 70 °C, minimum press time is reduced to 3–5 minutes.
• Apply pressure between 0.21 and 0.69 N/mm² (30–100 psi).
Bonding Time
• Indicative bond strength values for wood-to-wood bonding at approx. 14% moisture content and 20 °C:
• After 15 minutes press: 4.14 N/mm²
• After 60 minutes press: 6.21 N/mm²
Coverage
• Covers approximately 5.0–7.0 m² of bonded area per kg.
Cleaning
• Clean tools, equipment, and excess adhesive with a damp cloth before the adhesive dries.
• Once cured, adhesive can be removed using AT200 High Strength Cleaner.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.