Soudal Fix ALL® TURBOTACK
£10.08 inc. VAT
£8.40 ex. VAT
- Product ID: 173123
- Suitable For: Bonding in building and metal industry. Elastic bonding of objects, panels, profiles and other pieces on the most common substrates
- Application Method: Substrate condition The surface must be rigid, clean, dry, free of dust and grease.
- Time to full cure: 30 minutes and can be loaded after ca. 3 hours. Thicker adhesive layers or non-absorbent substrates extend the curing time. The bond can be fully loaded after 24-48 hours
- Volume: 290ml
- Type: Hybrid polymer bonding adhesive
- Colour: white
- Brand: soudal
- Manufactuer: soudal
Features & Benefits
Featured properties
- Extreme high initial tack of min. 200 kg/m²
- Very good adhesion on many materials, even if slightly moist
- Fast curing
- Good workability
- High shear strength after full cure (no primer)
- Low odour
- Permanently elastic after curing
- Very durable
- Non staining on natural stone
Data Sheets
Fix ALL TurboTack – Key Information & Application Guide
Hybrid polymer bonding adhesive
Fix ALL TurboTack has been developed for heavy duty bonding applications that need to set quickly. Fix ALL TurboTack combines exceptional high initial grab (200 kg/m²) with speed (hand-tight after 30 minutes).
Surface Preparation
- Porous surfaces: Use Primer 150 for strong adhesion in damp or water-prone areas.
- Non-porous surfaces: Clean with Soudal Surface Activator or Cleaner (refer to TDS).
- Plastics: Remove any release agents or protective films before bonding. Pre-treatment with Surface Activator is recommended.
Compatible Substrates
Fix ALL TurboTack bonds well with:
- Lacquered wood, stainless steel, galvanized steel, PVC, ABS, polycarbonate, PMMA (e.g. Plexiglass®), polystyrene, epoxy, and polyester.
Not suitable for: PE, PP, PTFE (Teflon®), bitumen, copper, bronze, or brass.
Note: Stress-loaded plastic bonding may cause cracking – test compatibility first.
Application Instructions
- Apply in beads/dabs every 15 cm with a caulking gun.
- Leave gaps to allow air escape.
- Press surfaces together, use a rubber mallet if needed.
- Support materials until set.
Curing Times:
- Hand-tight: ~30 mins (porous surfaces)
- Loadable: ~3 hours
- Full cure: 24–48 hours
Cleaning & Finishing
- Clean with White Spirit or Soudal Cleaner before curing.
- Finish with Soudal Finishing Solution.
- Repair using the same adhesive.
Safety & Storage
- Use in well-ventilated areas. Refer to product label & SDS.
- Shelf life: 12 months (unopened, 5°C–25°C).
- Maintain 1 mm minimum bond thickness for best performance.
- Classified as dangerous – follow all safety precautions.
For all other Soudal products on our website, please click here.
For any further information you may need on Soudal, please visit their website here.
Coming soon...
Coming soon...
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.35 inc. VAT
£2.79 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.58 inc. VAT
£7.15 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £13.14 inc. VAT
£10.95 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.69 inc. VAT
£2.24 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £7.02 inc. VAT
£5.85 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.72 inc. VAT
£2.27 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £43.20 inc. VAT
£36.00 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £32.02 inc. VAT
£26.68 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.