ARBO XL 1075 (Box of 25)

Recommended for the sealing of internal fire joints, for use in fire resistant doors and partitions. For use in blockwork and brickwork joints where low movement accommodation is required.
Recommended where sound reduction properties are required.

Joint preparation

The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes.

Joint Backing

Where applicable, appropriate joint filler e.g. mineral wool or closed cell polyethylene foam, should be used to provide the correct joint depth (see chart for joint dimensions required for fire
integrity values).

Application

All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.
Arbo PDC is supplied in polyethylene 310ml cartridges and can be applied using an Arbo Caulking Gun