Bond It Drive Alive Colour Enhancer 4 Litres

(5 customer reviews)


From: £22.67 inc. VAT
£18.89 ex. VAT

Checkout
  • Suitable For: enhancing present colour and extend the lifespan of the treated surface
  • Area of use: EXT
  • Application Method: roller
  • Volume: 4 LTR
  • Container Type: tub
  • Type: enhancer
  • Colour: 4 colours
  • Brand: Bond It
  • Manufactuer: Bond It
  • Box Size: 1

 

Bond It Colour Enhancer is designed to enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. It will enhance the present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles.

  • Restores colour
  • Reduces water penetration, staining and dirt/grime build-up
  • UV stable formulation
  • Helps inhibit organic growth
  • Solvent-free formulation – low odour
  • Facilitates easier cleaning
  • Improves water resistance and UV resistance
  • Contains fungicide, which retards mould growth.

 

For more in our range of sealants, please click here. For our range of concrete products, click here.

To find out more about Bond It and their range of products, you can visit their website here.

 

Colour Enhancer is designed to enhance coloured concrete and block paving, protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface.

 

APPLICATION
Colour Enhancer is ready to use straight from the tub. Stir well before use and periodically during application. A test on a small area is recommended to determine the necessary depth of colour. Apply using a brush or roller. Do not over apply or allow puddling to occur. Drying will happen within 1 to 2 hours on a dry, sunny day; however, cold or humid conditions will slow this down. Leave the area free from traffic for 3-4 hours after application. Wash hands and tools properly with soapy water after use. A single coat application is recommended, but two coats can be used upon the first application. Adverse reactions can be caused if the Colour Enhancer is used over other existing sealers or treatments, so it should be avoided at all times. Avoid over-application in all circumstances.

Each 4 litre container covers approx. 15m2 

LIMITATIONS
PLEASE BATCH MATCH TO ENSURE CONSISTENT COLOUR.
Always check that the batch numbers are the same to avoid a difference in colour. Do not apply to damp surfaces or in conditions subject to high humidity. Before application, surfaces should be allowed to dry completely for 48 hours. Do not use if rain is imminent. Do not apply to non-porous surfaces. Keep children and animals away until the product has fully cured. Do not allow any runoff to contaminate drains, waterways or plants.

 

5 reviews for Bond It Drive Alive Colour Enhancer 4 Litres

  1. Angela Atherton (verified owner)

    Super fast delivery to the Isle Of Man. Great price, cheapest online.

  2. Robert henry Wardell (verified owner)

    A fast and safe delivery, item exactly as described, A+++++

  3. Julie (verified owner)

    Very helpful. Great customer services. Thanks

  4. Dianne Parrinder (verified owner)

    Good price, came as stated , very happy with this product

  5. Beverley Adkin (verified owner)

    I have not used it yet because of water but I’m sure it would be good

Add a review

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £10.21 inc. VAT
£8.51 ex. VAT

From: £10.21 inc. VAT
£8.51 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £3.83£1.19 inc. VAT
£3.19£0.99 ex. VAT

From: £3.83£1.19 inc. VAT
£3.19£0.99 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT

£8.34 inc. VAT
£6.95 ex. VAT

£8.34 inc. VAT
£6.95 ex. VAT

£4.84£1.19 inc. VAT
£4.03£0.99 ex. VAT

£4.84£1.19 inc. VAT
£4.03£0.99 ex. VAT

£9.59£1.19 inc. VAT
£7.99£0.99 ex. VAT

£9.59£1.19 inc. VAT
£7.99£0.99 ex. VAT

£15.60£1.19 inc. VAT
£13.00£0.99 ex. VAT

£15.60£1.19 inc. VAT
£13.00£0.99 ex. VAT

From: £6.82£1.19 inc. VAT
£5.68£0.99 ex. VAT

From: £6.82£1.19 inc. VAT
£5.68£0.99 ex. VAT

From: £20.71 inc. VAT
£17.26 ex. VAT

From: £20.71 inc. VAT
£17.26 ex. VAT

  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £70.80 inc. VAT
    £59.00 ex. VAT

    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £8.14£1.19 inc. VAT
    £6.78£0.99 ex. VAT
      ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.       For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here.  

  • From: £3.83£1.19 inc. VAT
    £3.19£0.99 ex. VAT

    From: £3.83£1.19 inc. VAT
    £3.19£0.99 ex. VAT
      Arbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity.      For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p