Bond It Drive Alive Patio Seal 5L
- Suitable For: protecting blocks, patios and sand joints from water penetration, oil/petrol grease, etc.
- Area of use: EXT
- Application Method: brush/roller
- Time to full cure: 1-2 hours
- Volume: 5 LTR
- Container Type: bottle
- Type: sealant
- Colour: milky white
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Bond It Drive Alive Patio Seal is a premium grade, solvent-free solution designed to protect blocks, patios and sand joints from water penetration, oil/petrol grease spillages and dirt and grime build-up. To enhance the present colour and significantly extend the lifespan of block paving driveways or paths and patios.
- Facilitates easy cleaning
- Solvent-free formulation – Low odour
- Improves water resistance and UV resistance
- Retards mould growth.
For more in our range of cleaners, please click here. For our range of tools, please click here.
For more information on Bond It and their products, you can visit their website here.
Patio Seal is ideal for protecting block paving driveways, pathways and patios against water penetration, as well as spillages involving contaminants, such as oil and grease. It also works as a deterrent against dirt and grime build-up and will enhance both the present colour of the path and significantly extend the driveway’s lifespan.
APPLICATION
It is advised that you test this product on a small area before use to check compatibility. Before use, ensure the surface to be treated is completely dry. Apply a single coat using either a brush or roller ensuring no pooling occurs. Allow 3-4 hours drying time before using the area again. Application temperatures should be between 5oC and 30oC. Colder humid conditions will delay the drying time. Patio Seal dries clear, but over application or use on damp surfaces can lead to white discolouration.
LIMITATIONS
Do not apply to wet surfaces or high humidity conditions. Do not use when rain is forecast (protect from rain until dry). Keep children and pets away from all treated areas until it’s fully cured. Do not allow any runoff to contaminate drains, waterways or plants. Do not use acid-based cleaners as these will potentially remove and discolour the product. Avoid using power washers.
2 reviews for Bond It Drive Alive Patio Seal 5L
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
-
From: £4.28 inc. VAT
£3.57 ex. VAT -
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Simon (verified owner) –
James and the team are great. Ordered over the internet, paid by PayPal. Order confirmed by reply email. Goods delivered within 3 working days. Great service
Anonymous (verified owner) –