- Suitable For: providing a watertight membrane
- Area of use: INT
- Application Method: brush
- Volume: Standard Kit - 4.5m² Large Kit - 7.5m²
- Container Type: tubs
- Type: membrane
- Brand: Everbuild
- Manufactuer: Sika
- Box Size: 1
Data Sheets
Shelf Life: 24 months for all individual components when stored according to the manufacturer’s instructions.
Storage Conditions: Store in dry conditions between 5°C and 25°C.
For more in our range of membranes, please click here. For our full range of Everbuild products, click here.
Alternatively, you can visit Sika Everbuild website here.
Everbuild Aquaseal Wet Room System is ideal for use in showers, wet rooms, and wet zones in bathrooms, providing waterproofing prior to tiling. It is designed for application on board joints, corners, and pipe entries, and is suitable for use on a variety of surfaces including plasterboard, MDF, concrete, wet room boards, plywood, and more.
Substrate Quality
Ensure all surfaces are clean, sound, and free from dust.
Application Method / Tools
The EVERBUILD® Aquaseal® Wet Room System is a complete waterproofing kit that covers 7.5 square meters (4.5 square meters for the standard shower kit). The kit includes the following components, applied in the order listed:
- Waterproof Tanking Primer – A ready-to-use primer applied by brush to all porous and semi-porous surfaces to be waterproofed. It dries quickly and can be over-coated after 1 hour.
- Waterproof Tanking Tape – A self-adhesive butyl-backed fleece tape applied to corner joints, board joints, and pipe penetrations to ensure a watertight seal that accommodates cross-directional movement. The 10-meter roll is typically sufficient for 7.5 square meters.
- Waterproof Drain Mat – A self-adhesive, butyl-backed fleece designed to cope with board movement around the drain outlet, the most water-sensitive area.
- Waterproof Tanking Membrane – A ready-to-use liquid waterproofing compound applied in two coats by brush. It forms a flexible, watertight membrane, is low-hazard, solvent-free, and dries quickly, allowing tiling to begin after 12 hours.
The tape can be over-coated with the Aquaseal Waterproof Tanking Membrane immediately after application. Ensure that tape overlaps on both sides of internal corners to avoid weak spots.
Limitations
- Not suitable for timber or boards treated with spirit or stearate-based coatings.
- Not for use in areas with high temperatures.
It is the user’s responsibility to determine suitability. For advice, contact Technical Services.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit






Reviews
There are no reviews yet.