Sika Black Jack 901 Bitumen Paint
From: £8.75 inc. VAT
£7.29 ex. VAT
- Area of use: EXT
- Volume: 1L, 2.5L, 5L, 25L
- Container Type: Tin
- Type: Bitumen Paint
- Colour: Black
- Brand: SIKA
- Manufactuer: SIKA
Sika® Black Jack®-901 Black Bitumen Paint is a solvent-based, full-bodied black bituminous paint that dries to form an odourless, taint-free protective film. It is suitable for use on most common building surfaces, including metal, wood, and felt, providing fast-drying protection and a durable finish. The paint is applied using white spirit as the solvent and achieves a wet film thickness of 0.1 mm and a dry film thickness of 0.05 mm per coat at a coverage rate of 11 m² per litre.
Key Points:
– Solvent-based, full-bodied black bituminous paint.
– Forms an odourless, taint-free protective film when dry.
– Suitable for metal, wood, felt, and most building surfaces.
– Fast drying with specified wet (0.1 mm) and dry (0.05 mm) film thickness per coat.
For more in our range of Bitumen please click here. For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
Sika® Black Jack®-901 Black Bitumen Paint provides a durable, waterproof, weather-resistant, and corrosion-protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. The paint is suitable for a wide range of materials, including iron, steel, lead, zinc, aluminium, asbestos-cement, concrete, stone, wood, felt, and brick. It is primarily used for protecting metal surfaces such as corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, downpipes, fences, railings, and gates; for coating concrete structures, stone, brick, screeds, and sand/cement surfaces; and for overcoating felt or wood.
LIMITATIONS
Do not use in areas where surfaces may later come into contact with solvents. The product is not suitable for potable drinking water tanks. Avoid inhaling vapours in confined spaces, and allow sufficient drying time between coats. Bitumen paint may bleed through subsequent paint layers, so always apply a primer recommended by the paint manufacturer before overpainting. Note that Black Jack® 902 Bitumen & Flashing Primer is not rust-inhibitive and should not be used on rusting metal; instead, use a red lead oxide, zinc phosphate, or similar primer. Always test compatibility before use.
ECOLOGY, HEALTH AND SAFETY
Users must consult the most recent Safety Data Sheets (SDS) before using any products. The SDS provides guidance on safe handling, storage, and disposal of chemical products, including physical, ecological, toxicological, and other safety-related information.
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
All surfaces must be dry, stable, and thoroughly cleaned of dirt, dust, and grease. Wet surfaces should be brushed and wiped dry. Repair cracks and holes with Black Jack® 903 Bitumen Trowel Mastic, and secure loose felt with Black Jack® 904 Roof Felt Adhesive. Wire-brush metal surfaces to remove rust, and for long-term protection, treat with a rust-inhibitive primer such as red lead or zinc phosphate. Remove loose or blistered paint, including tar-based systems. Roughen new galvanised surfaces with a wire brush or apply a suitable etch primer. Prime porous surfaces such as concrete or cement with Black Jack® 902 Bitumen & Flashing Primer and allow to dry. Remove any algae or moss using Sika® Mouldbuster before proceeding.
APPLICATION
Sika® Black Jack®-901 Black Bitumen Paint is ready for use and should not be thinned. Stir thoroughly before application and apply by brush or spray. Apply a minimum of two coats, allowing the first coat to dry (typically 2–4 hours, depending on weather) before applying the second. For enhanced UV protection, apply Black Jack® 907 Solar Reflective Paint after the 901 Black Bitumen Paint has dried.
CLEANING OF TOOLS
Clean all tools immediately after use with Sika® Wonder Wipes or white spirit. Wipe off any spillage before the bitumen paint sets.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.