Sika Black Jack 902 Bitumen and Flashing Primer
From: £8.78 inc. VAT
£7.32 ex. VAT
- Suitable For: - Concrete roofs and floors, cementitious screeds and renders. â–ª Bitumen felt, asphalt and mastic. â–ª Wood. â–ª Weathered corrugated iron and steel.
- Area of use: EXT
- Application Method: Brush / Spray
- Volume: 1L & 5L
- Container Type: Tin
- Colour: Black
- Brand: SIKA
- Manufactuer: SIKA
Sika® Black Jack®-902 Bitumen & Flashing Primer is a thin, fast-drying black primer designed to provide a strong key for bitumen paints, roof coatings, and flashing applications. It is suitable for use on a wide range of substrates, including concrete roofs and floors, cementitious screeds and renders, bitumen felt, asphalt, mastic, wood, and weathered corrugated iron or steel. The primer can also be used before applying Black Jack® Flashing Tape, ensuring optimal adhesion and performance with all bituminous coatings. Its controlled film thickness allows for efficient coverage and consistent results.
Key Points
– Provides a strong key for bitumen paints, roof coatings, and flashing applications.
– Suitable for concrete, screeds, renders, bitumen felt, asphalt, mastic, wood, and weathered metal.
– Can be used as a primer for Black Jack® Flashing Tape.
– Fast-drying and compatible with all bituminous coatings, with controlled film thickness for consistent coverage.
For more in our range of primers, please click here. For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
Mainly used for priming:
â–ªConcrete roofs and floors, cementitious screeds and
renders.
â–ª Bitumen felt, asphalt and mastic.
â–ª Wood.
â–ª Weathered corrugated iron and steel.
Also suitable as a primer prior to applying Black Jack® Flashing Tape
LIMITATIONS
Do not use in areas where surfaces may later come into contact with solvents.
â–ª Avoid inhaling vapours, particularly in confined spaces.
▪ Sika® Black Jack®-902 Bitumen & Flashing Primer is not rust inhibitive and should not be applied over rusting metal; a red oxide, zinc phosphate, or similar primer must be used first.
▪ Always test compatibility before use and allow sufficient drying time (3–6 hours depending on conditions) before overcoating.
▪ The manufacturer cannot anticipate all potential uses of the product; it is the user’s responsibility to confirm suitability. Contact the Technical Services Department for guidance if in doubt.
ECOLOGY, HEALTH AND SAFETY
Users must consult the most recent Safety Data Sheets (SDS) before using the product. The SDS provides essential guidance on safe handling, storage, disposal, and information on physical, ecological, and toxicological hazards.
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
All surfaces must be dry, stable, and free from dirt, dust, grease, and loose material. Brush away water from wet surfaces and wipe dry. Repair cracks and holes using Black Jack®-903 Bitumen Trowel Mastic, and secure loose felt with Black Jack®-904 Roof Felt Adhesive. Metal surfaces should be wire-brushed to remove rust; for long-term protection, apply a rust-inhibitive product such as red lead or zinc phosphate. Remove loose or blistered paint and tar-based coatings. New galvanised surfaces should be roughened or treated with a proprietary etch primer. Clean any green growth with Sika® Mould Buster as directed before proceeding.
APPLICATION
Sika® Black Jack®-902 Bitumen & Flashing Primer is ready to use and should not be thinned. Stir thoroughly before and during application. Apply by brush or spray, ensuring the primer is well scrubbed in for a thin, even coverage. Avoid ponding or pooling when spraying. For fibre-cement or rag felt surfaces, apply generously to saturate the material.
CLEANING OF TOOLS
Clean all tools immediately after use with Sika® Wonder Wipes or white spirit. Wipe off any spillage from surfaces before the bitumen sets.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.54 inc. VAT
£2.95 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.19 inc. VAT
£2.66 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.