Cromar Exterior Water Seal 5L
£15.49 inc. VAT
£12.91 ex. VAT
- Product ID: MXW/501
- Suitable For: use on brickwork, concrete, stone, paving, asbestos and cement.
- Area of use: EXT
- Application Method: brush
- Volume: 5L
- Container Type: tin
- Type: waterproofer
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
Cromar Exterior Water Seal is a clear, high performance, waterproof treatment for exterior porous surfaces such as brickwork, asbestos and cement. Its water repellent formula makes it ideal for exterior surfaces.
Coverage will depend on the porosity of the substrate. Guideline coverage is 2-4m²/litre/coat.
For more in our range or waterproofers, please click here.
For more in our Cromar range, please click here.
Alternatively, if you would like more information on Cromar, you can visit their website here.
Exterior Water Seal is for use on brickwork, concrete, stone, paving, asbestos and cement. It can also be used to repel water on exterior wood that has previously been treated with a preservative.
APPLICATION
All surfaces to be treated should be dry, clean and free from dirt, dust, oil, grease and organic growth. Surfaces may be washed down with clean water but detergents of soap solutions should not be used. Do not apply for 2/3 days after rain. Defective mortar should be removed and replaced with new. The product will not be effective on materials that are unsuitable for exterior use. Exterior Water Seal should not come into contact with windows or other glazed areas, which should be masked to prevent splashes. In such instances contaminated areas should be wiped immediately with White Spirit.
Exterior Water Seal is ready to use and should not be diluted. Shake container before use. The material should be applied liberally by soft bristled brush or low-pressure airless equipment avoiding mist forming by using a course spray nozzle. On masonry a single application is normally all that is required but on porous surfaces a second application may be applied as soon as the first coat has dried. On wood, two coats are also required. Treatment should start at the top and work down.
Cannot be over-painted therefore it should be used as a final application only, as it may affect the adhesion of subsequent coatings.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
-
From: £28.49 inc. VAT
£23.74 ex. VAT -
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.56 inc. VAT
£2.97 ex. VAT
From:
From: £11.34 inc. VAT
£9.45 ex. VAT
From:
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
£12.38 inc. VAT
£10.32 ex. VAT
£4.86 inc. VAT
£4.05 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.