Thompsons P&B Paving Seal Nat Fin 5Lt
£43.58 inc. VAT
£36.32 ex. VAT
- Brand: thompson
- Manufactuer: thompson
Thompson’s P&B Paving Seal Natural Finish 5L is a durable, water-based sealant designed to protect and enhance outdoor paving surfaces while maintaining their natural appearance. Suitable for use on block paving, concrete slabs, brickwork, and natural stone, it penetrates the surface to provide long-lasting protection against rain, stains, oil, grease, and everyday dirt. The breathable formula helps prevent water damage while allowing trapped moisture to escape, reducing the risk of cracking or peeling. Once applied, it leaves a clear, natural finish that preserves the original look of the paving without adding gloss, making it ideal for patios, driveways, and paths that require subtle yet effective protection.
Thompsons P&B Paving Seal Natural Finish 5L is a protective paving sealer designed to help extend the life and appearance of outdoor paving surfaces such as block paving, concrete slabs, stone patios, and driveways. It penetrates the surface to provide long-lasting protection against water penetration, oil spills, stains, and weather damage while maintaining the natural look of the paving rather than creating a glossy finish. Ideal for use on patios, paths, and driveways, the sealer also helps stabilise jointing sand, reduce weed growth between blocks, and make surfaces easier to clean and maintain. It is typically applied with a brush, roller, or sprayer to clean, dry paving to enhance durability and preserve the original colour and texture of the surface.
Application & Limitations – Thompson’s Paving & Brickwork Seal Natural Finish 5L
Thompson’s Paving & Brickwork Seal Natural Finish is a ready-to-use protective sealant designed for exterior paving, concrete, brick, and stone surfaces. It is typically applied with a brush, roller, or low-pressure sprayer onto clean, dry surfaces to create a clear, natural-look protective layer that helps repel water, resist oil and grease stains, and reduce moss or algae growth on patios, paths, and driveways. The product works by penetrating and sealing the surface while maintaining the natural appearance of the material rather than leaving a glossy film. However, it should not be applied to damp, frozen, or previously sealed surfaces unless the old coating has been removed, and it is unsuitable for polished stone or indoor floors where slip resistance is critical. Application should also be avoided during rain or when temperatures are below recommended levels, and heavy traffic should be kept off the treated area until the sealant has fully dried and cured.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
From: £73.92 inc. VAT
£61.60 ex. VATCM200 PF Fast Cure is a two-part sealant that is used for several sealing areas. Most commonly used for sealing expansion joints, due to the advantages of the CM 200 PF is can be used for sealing expansion joints in concrete paved areas, docks, container depots, industrial factories, warehousing petrol forecourts. CM200 PF can be cold applied, so ideal for small works, such as remedial re-sealing of joints. Advantages High-performance good movement accommodation, tolerant of severe climatic conditions. Chemical Resistant to spillages of fuels, hydraulic fluids, syntheticSelect options This product has multiple variants. The options may be chosen on the product page -
£18.74 inc. VAT
£15.62 ex. VATFOSROC Nitoseal MS600 is suitable for sealing joints in buildings and civil engineering structures that will be subject to intermittent immersion. Typical applications include: - Reservoirs - Sewage tanks - Sea walls - Basements - Subways - Parapets - Bridges - Superstructures Advantages - Approved for use in contact with potable water - Meets key international standards - Resistant to aerobic and anaerobic bacteriological attack - Excellent resistance to acids and alkalis - Cures to a robust, elastic seal - Accommodates continuous cyclic movement - High resistan -
£3.12 inc. VAT
£2.60 ex. VATEverbuild Everflex 145 Butyl Sealant is a permanently plastic one-part sealant based on PU Technology. That provides a weatherproof seal in a variety of interior and exterior applications. Everbuild Everflex 145 Butyl Rubber Sealant forms a skin in approximately 24hrs but remains plastic underneath. The sealant allows joint movement of 5% and can be painted after application & cure time. Advantages - Overpaintable. - Adheres to most common building surfaces. - High solid formulation - Good weathering properties. For all other Everbuild products on our -
From: £3.94 inc. VAT
£3.28 ex. VATSoudal Soudaseal 215LM is a 1-component, moisture-curing, low-modulus elastic joint sealant. Soudaseal 215LM is designed for the elastic joint sealing and waterproofing of movement and connection joints in buildings. Due to its very low modulus, it is also suitable for EIFS Facades. CHARACTERISTICS – Tested and conform to ISO 11600-F-25LM – High bond strength on nearly all surfaces – Excellent adhesion and extrudability, even in adverse conditions – High-performance mechanical properties – Almost odourless – No bubble formation within sealant, even in wetSelect options This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.