Bond-it PC100 INHIBITOR 1L
£5.48 inc. VAT
£4.57 ex. VAT
- Product ID: BDPC100
- Suitable For: All metals including aluminium
- Volume: 1L
- Container Type: Plastic Bottle
- Colour: Straw coloured
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Data Sheets
Bond It PC100 is a high-performance inhibitor designed to prevent scale formation, rust and corrosion, hydrogen gassing, microbiological growth, and boiler noise.
Storage Conditions
Store in cool, dry conditions in tightly sealed container. Store above +5o C and below +30o C. Do not allow to freeze.
Shelf Life
24 months from date of manufacture when stored in the original, sealed bottles.
For our full range of products from Bond It, please click here.
For more information on Bond It and their products, you can visit their website here
PC100 INHIBITOR is suitable for all metals including aluminium. Once added PC100 does not need to be replaced unless the system is drained down
Application
Filling the system: For open systems, dose via the filling and expansion tank. If the system is already full, drain at a low point to ensure the product enters the circulatory system. For sealed systems, fill via the filling loop or a drained radiator.
Dosage: For optimum efficiency, PC100 should be added at 1.4% of the system volume (i.e., 1 L per 70 L of system water). One bottle is generally sufficient for a typical system with a 14.5 kW boiler (50,000 Btu/hr), a domestic hot water cylinder, and up to 10 radiators. Larger systems may require an additional bottle. Overdosing will not harm the system.
Note: If a thermal storage appliance is fitted, account for the extra volume of primary water. The concentration can be checked using a conductivity meter.
Limitations
Not suitable for use in PRIMATIC single feed cylinders. For use only in fully indirect systems.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.