Ronseal Diamond Hard Floor Varnish
From: £51.70 inc. VAT
£43.08 ex. VAT
- Suitable For: interior on new or previously varnished wooden floors
- Area of use: INT
- Application Method: brush
- Volume: 2.5L , 5L
- Brand: ronseal
- Manufactuer: ronseal
Diamond Hard Floor Varnish enhances the natural beauty of wooden floors while delivering long-lasting, tough protection against everyday knocks, scuffs, and spills. Its fast-drying, low-odour formula makes it convenient to use, allowing you to refresh your floors without lingering smells or long downtime. Suitable for both new and previously varnished floors, it provides a durable, non-yellowing finish that keeps colours looking bright and fresh, with excellent coverage for efficient application.
Key Points:
– Tough, long-lasting protection against wear, spills, and scuffs
– Fast drying with recoat time of 2 hours and low odour formula
– Non-yellowing finish keeps wood looking natural and bright
– Covers up to 18m² per litre and available in a range of colours
For more in our range of varnishes, please click here. For our full range of products from Ronseal, please click here.
For more information on Ronseal and their products, you can visit their website here.
Uses include:
-
Protecting wooden floors in high-traffic areas such as living rooms, hallways, kitchens, and dining rooms
-
Sealing and strengthening softwood and hardwood floors against scuffs, scratches, and knocks
-
Providing resistance to spills, stains, and moisture, making it suitable for busy family homes
-
Enhancing the appearance of wood by adding a clear, attractive finish while allowing the grain to show through
-
Refreshing and re-coating previously varnished floors (once properly prepared)
Before You Start
– Ensure the room temperature is above 10°C, remove furniture, and ventilate by opening doors and windows.
Wear a mask when sanding to avoid inhaling dust.
How to Prepare Unvarnished Floors
– Sand along the grain of the floorboards using 120 grit sandpaper (a floor sander is recommended for ease).
– Allow dust to settle, vacuum thoroughly, then wipe with white spirit.
– Fill any holes or imperfections with a suitable wood filler.
How to Prepare Varnished Floors
– Lightly sand with 120 grit sandpaper; if varnish is flaking, sand back to bare wood using a floor sander.
– Remove dust by vacuuming and wipe the surface with white spirit.
Application
1. Stir thoroughly and test the colour on a small area.
2. Apply with a 4” brush, starting from the furthest corner and working along the grain of 1–2 boards at a time.
3. Allow 2 hours drying time between coats and apply 3 coats for best results.
4. Lightly sand with 240 grit sandpaper before the final coat, wipe clean, and apply the last coat.
5. Floor is ready for light foot traffic after 2 hours, furniture after 24 hours, and fully cured after 72 hours.
Aftercare
Cleaning
– After 72 hours, floors can be vacuumed and swept as normal.
– Remove dirt and grit regularly to prevent scratches and clean marks with a damp microfiber cloth.
– Clean brushes with warm soapy water.
Repairs
– Repair scratches or damage by lightly sanding and applying up to 3 coats.
– Alternatively, use a scratch repair kit for quick fixes.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
£8.06 inc. VAT
£6.72 ex. VATSika Heavy Duty Wonder Wipes are designed specifically for the building, engineering and allied trades to clean ingrained dirt from hands, tools and surfaces. CHARACTERISTICS / ADVANTAGES - Use on hands, tools and surfaces. - Textured for removal of ingrained dirt. - Ideal for cleaning up paint, sealant, adhesive, bitumen, expanding foam, oil, grease and much more. For all other cleaners on our website, please click here. For any further information on Sika Everbuild products, please visit their website here. -
£107.45 inc. VAT
£89.54 ex. VATFOSROC MS2 is a superior two-part priming system used in conjunction with Fosroc Nitoseal sealant range. FOSROC MS2 Nitoseal primer is formulated for priming prior to application of the sealant. For all other FOSROC products available on our website, please click here. For any further information you require or need on FOSROC, please visit their website here. -
£6.82 inc. VAT
£5.68 ex. VATEverbuild Everflex Silicone Eater is specifically designed to remove all silicone based sealants and surface water repellents - cured and uncured. The product acts by denaturing silicone polymers, making them easily water or solvent cleanable. Advantages - Readily denatures silicone. - May be used vertically as well as horizontally. - Water clean-up. For all other cleaners on our website, please click here. For tools, please click here. For any further information on Everbuild's products, please visit their website here. -
£10.45 inc. VAT
£8.71 ex. VATEverbuild PVCu Solvent Cleaner PVCu solvent cleaner removes ingrained dirt from PVCu and most plastics, restoring an "as new" look to old windows and plastic garden furniture. Benefits • Fast drying • Removes ingrained dirt. For more information on Everbuild, please visit their website here. For more in our Primers and Cleaners range, click here, or for more of our Everbuild items, please click here.
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.