APPLICATION
SUBSTRATE PREPARATION
Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists in the curing process.
APPLICATION METHOD / TOOLS
ALWAYS WEAR PROTECTIVE GLOVES.
Shake can well before use (about 20 times). Carefully fix nozzle. Do not overtighten or force.
ALWAYS USE CAN UPSIDE DOWN.
For EVERBUILD Gun Grade Expanding Foam, tighten securely into one of our range of guns. Only partially fill cavities as the foam will expand to fill the remaining space. Any excess foam can be removed while still wet with Everbuild Foam Cleaner. Cured foam must be removed mechanically. When used for fixing door frames, supports must be used until the foam is fully cured.
Please note:
When transported in cars, keep in the boot, out of direct sunlight. When removing cured foam from the skin, take care not to damage with abrasives.
IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with Everbuild Foam Cleaner before the foam has cured. Do not push any object into the valve as the contents may explode.
LIMITATIONS
– Carefully read instructions and text in warning box before use.
– Do not the over-pressurise container.
– Always apply above 5°C.
– Clean spills immediately with Everbuild Foam Cleaner.
– When using EVERBUILD Gun Grade Expanding Foam, always clean the gun thoroughly with Everbuild Foam Cleaner until the jet is clear of foam.
– Leave the canister attached until the gun is to be used again
– When applying, always remove the nozzle from the can and clean immediately after use with Everbuild Foam Cleaner
– For fire rated joints, use Everbuild Firefoam B1 in conjunction with Everbuild Firemate intumescent sealant.
– Once cured, the dry foam must be removed mechanically. No solvent will remove the product.
Reviews
There are no reviews yet.