Everbuild FireFoam B1 Hand Held
£10.70 inc. VAT
£8.92 ex. VAT
- Product ID: 488714
- Suitable For: Deep joints before applying sealant or plaster
- Area of use: INT & EXT
- Volume: 750ml
- Container Type: can
- Type: foam
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
FireFoam B1 Hand Held is a quick-setting, fire-rated, one-part polyurethane foam. It expands on application to yield up to 50 times the can content and meets the extremely stringent requirements of the test criteria DIN 4102 Part 1 for Construction Materials; Class B1 and BS 476 Part 20. Once cured, FireFoam B1 can be cut, sawn or plastered over after only one hour.
Advantages
– A high degree of fire rating: slows down the passage of flames and smoke.
– High-speed setting – can be sawn or plastered within 1 hour.
– Expands up to 50 times in size
– Fills irregular and vast voids, where most fillers or foams would fail.
– Possesses insulating and sound deadening properties.
For more in our range of Everbuild products, please click here. Or for all other foams on our site, please click here.
For any further information on Everbuild’s products, please visit their website here.
FILLING
– Electrical wire chasing before plastering, where a fire rating is required.
– Deep joints before applying sealant or plaster
FIXING
– Door frames
– Timber structures
– Windowsills and thresholds.
– Window frames
– Insulating
– Behind cladding to exterior walls.
– Behind soffit and barge boards
APPLICATION
LIMITATIONS
– Do not over-pressurise container.
– Always apply above 5°C.
– Clean spills immediately with Everbuild Foam Cleaner
Please note:
When transported in cars, keep in the boot, out of direct sunlight. When removing cured foam from the skin, take care not to damage with abrasives. Grease skin with body lotion or similar.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.