Sika
Filter Your Product
-
£5.56 ex. VATSika® Stixall® Ultra is an extremely flexible, high-grab adhesive and sealant that provides exceptional initial grab and high ultimate bonding strength on almost any surface, including damp or wet substrates. Suitable for interior and exterior use, it is totally waterproof and weatherproof, permanently flexible and resistant to mould, chemicals, petrol, UV radiation and temperatures from -40 °C to +100 °C. It is quick-curing, gap-filling and overpaintable with some paints, subject to testing. The product is also certified for food preparation and sanitary areas and meets the stringent EC1PSelect options This product has multiple variants. The options may be chosen on the product page -
£29.42 - £117.19 ex. VATSika® Block Paving Sealer is a clear, solvent-based acrylic coating designed to bind jointing sand and create a durable protective seal over block paving, mineral pavers and flags. It penetrates deeply into the paving and jointing sand before drying through solvent evaporation, leaving a clear matt or satin finish. Key Features: Seals and protects: Helps protect paving against water, oil and petrol. Long-lasting performance: Durable acrylic-based formula for lasting protection. Resists weeds and aids cleaning: Helps reduce weed growth in joints and makes paving easier to clean.Select options This product has multiple variants. The options may be chosen on the product page
-
£20.51 ex. VATSika MouldBuster is a powerful, fast-acting solution designed to remove algae, mould and green growth from most surfaces without the need for scrubbing or pressure washing. Its biodegradable formulation contains no bleach or acids and helps protect surfaces against early regrowth. 4 Key Points: Fast-acting: Effectively removes algae, mould and green growth. Easy application: No scrubbing or pressure washing required. Biodegradable: Contains no bleach or acids. Helps prevent regrowth: Provides protection against early regrowth. Shelf Life - 24 months from date of m
-
£31.47 ex. VATSika® Waterproofer & Protector is a solvent-based treatment designed to provide long-lasting protection against water penetration and damp. Its deep-penetrating formula creates a water-repellent barrier on porous surfaces while allowing the material to breathe. Quick-drying and colourless, it is suitable for brick, stone, screed and most common mineral surfaces. The product can be easily applied using a brush, roller or low-pressure spray. Key Points: Long-lasting protection: Helps protect surfaces against rain, water penetration and damp. Deep-penetrating formula: Cr
-
£4.83 ex. VATSikaMix Integral Waterproofer is a liquid/gel admixture designed to provide long-term protection against water penetration in mortar, render, and screed applications. By significantly reducing water permeability and surface absorption, it helps protect structures from water damage in demanding environments such as swimming pools, water tanks, roofs, external rendering, pointing, and below-ground construction. The formulation includes an air-entraining agent that improves workability without flattening the mix, eliminating the need for a separate plasticiser. It is also low in toxicity, chlorid
-
£7.60 ex. VATSika MaxMix® Waterproofer is a highly concentrated waterproofing and air-entraining admixture for sand and cement mixes, delivering improved workability, enhanced water resistance, and long-term protection against shrinkage, cracking, and freeze/thaw damage. Sika MaxMix® Waterproofer forms extremely stable air bubbles in sand/cement mixes. Its concentrated formula means 1 litre provides the equivalent performance of 25 litres of standard waterproofer. Key Points - Improves water resistance and helps reduce efflorescence. - Enhances mortar workability with a smooth, plasticised consisten
-
£5.14 ex. VATSikaMix Frostproofer and Hardener is a chloride-free admixture designed to accelerate the setting and hardening of mortar, concrete, screeds, and renders. It provides reliable frost protection during the curing period in temperatures as low as -8°C, making it ideal for cold-weather construction. The formulation also enables faster finishing times, improves productivity by optimising mould usage, and can be used as a plugging admixture where rapid setting is required. Being non-corrosive, it is safe for use with metal components such as brick ties. Key Points: - Accelerates setting and har
-
£3.49 ex. VATSikaMix Frostproofer and Plasticiser is a chloride-free, air-entraining mortar admixture that combines frost protection, acceleration, and plasticising properties in a single product. Designed for use in cold weather, it improves mortar workability, speeds up finishing times, and enhances resistance to freeze/thaw cycles while reducing cracking, shrinkage, and efflorescence. Key Points - Provides frost protection and freeze/thaw resistance down to -8°C. - Improves mortar workability, trowelability, and ease of brick alignment. - Reduces shrinkage, cracking, bleeding, and efflorescence.
-
£5.11 ex. VATEVERBUILD® 208 Powder Mortar Tone is a range of powdered oxide pigments designed to colour concrete, mortar, render, and screeds. The pigments disperse easily for consistent, uniform colouring and can be dosed at different levels to achieve a variety of colour depths. Formulated with light-fast pigments and a built-in plasticiser, it also enhances mortar performance and finish quality. Key Points - Provides consistent, long-lasting colour for cement-based materials. - Improves workability and trowelability with added plasticiser. - Chloride-free formulation (
-
£32.37 ex. VATSika® Black Jack®-906 Bitumen Roofing Emulsion is a stable bitumen/water emulsion with a medium brushing consistency that dries to a black, flexible coating. It is designed for general waterproofing of roofs, providing protection for surfaces such as concrete, fibre/cement, roofing felt, mastic asphalt, corrugated iron, slates, tiles, lead, copper, and zinc. The product also protects metal components, including pipes and structural steelwork, against corrosion, and can serve as a vapour barrier for cold storage rooms, mushroom houses, and similar installations. Its formulation allows applica
-
£8.04 ex. VATSika® Clear Fix is a transparent hybrid polymer grab adhesive designed for both interior and exterior use, offering strong bonding performance on a wide range of materials. With added UV stabilisers, it is ideal for applications where clarity is essential and coloured adhesives would be visible. This versatile product can be used in numerous situations, even when fully submerged in water. It delivers excellent initial grab with no slip, provides gap-filling capability, cures quickly, and remains fully waterproof and weatherproof. Sika® Clear Fix is also resistant to chemicals such as dilute
-
£30.68 ex. VATSikaflex®-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable to bond metals, particularly aluminium (including anodized finishes), metal primers and paint coatings (2-component systems), or ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc.
Sika
We are an authorised distributor of Sika Sealants and are fully trained to offer technical and product support to our customers. We offer a variety of Sika sealant products including waterproofing, concrete production, flooring, roofing, and bonding refurbishment among others.
The Sika range of sealants is ideal for use in the construction industry where waterproof and anti-molding properties are a top priority. Some of its advantages include adhesion, Sikaflex sealants bond to many surfaces including porous substrates such as concrete without needing primers. Sikaflex polyurethanes also have a superior wetting action.
Sikaflex sealants are also dirt-resistant because of their unique chemical composition. This results in little dirt build-up throughout the building’s lifetime.
Another advantage of Sika sealants is their stable consistency which does not discolour or stain. They are also easy to paint over and can be treated with a variety of coatings without delamination. Sika sealants are also immersible in water without any negative effect.
The growing demand in the construction industry is fueled by a sharp focus on efficiency of building developments and the variety of materials applied in construction. There is a greater increase in the volume of high-rise construction projects with growing concerns about health, the environment and safety issues.
Sika’s full range of products used in joint sealing and other structures includes top-of-the-line elastic sealants and bonding solutions that meet industry regulations.
Whether you are sealing an expansion joint on the windows of a storefront or on the sidewalks, we have the perfect sealant for you.