- Brand: Ronseal
- Manufactuer: Ronseal
Ronseal Wet Rot Wood Hardener 500ml is a specialist wood repair treatment designed to penetrate and reinforce timber that has been weakened by wet rot. Its low-viscosity formula soaks deeply into soft, decaying wood fibres, hardening them as it cures to create a strong, stable base for further repairs such as filling, sanding, or painting. Ideal for use on doors, window frames, skirting boards, and other exterior or interior wood exposed to moisture, it helps extend the life of damaged timber without the need for full replacement. The product dries relatively quickly, improves adhesion for fillers and coatings, and is easy to apply with a brush, making it a practical solution for both DIY users and professional decorators tackling rot-affected wood.
Ronseal Wet Rot Wood Hardener 500ml is designed to restore and reinforce wood that has been weakened by wet rot, making it suitable for use on doors, window frames, skirting boards, and other exterior or interior timber surfaces. It penetrates deep into soft, decaying wood fibres and hardens them, creating a solid base for filling, sanding, and painting. Ideal for repair work rather than full replacement, it helps extend the life of damaged wood by stabilising the affected area and preventing further deterioration when used as part of a proper repair process.
Ronseal Wet Rot Wood Hardener 500ml is designed for use on soft, decaying wood affected by wet rot, where it penetrates deep into the fibres to strengthen and stabilise the material before filling or repainting; it is commonly applied to exterior and interior timber such as window frames, doors, skirting boards, and structural wood that has become spongy but is still largely intact. The product is brushed onto clean, dry (or slightly damp) wood after removing loose, crumbly material, allowing it to soak in and harden the surface, making it suitable for subsequent repair with fillers or coatings. However, its effectiveness is limited to early to moderate stages of decay and it cannot restore severely rotted or structurally compromised wood that has lost integrity and requires replacement; it also does not treat the underlying cause of moisture ingress, so unless the source of damp is addressed, rot may return. Additionally, it is not suitable for use on completely saturated timber, painted or sealed surfaces without preparation, or as a standalone structural repair solution.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit






Reviews
There are no reviews yet.